Off The Grid
Открыть в Telegram
Join chat for discussion. This is a channel to collect and share information pertaining to living independent of the corrupt and broken system. -Escape the control grid-
Больше📈 Аналитический обзор Telegram-канала Off The Grid
Канал Off The Grid (@offthegridofficial) языкового сегмента Английский является активным участником. Сейчас сообщество объединяет 14 301 подписчиков, занимая 869 место в категории Природа и животные и 2 601 место в регионе США.
📊 Показатели аудитории и динамика
С момента создания невідомо проект демонстрирует стремительный рост, собрав аудиторию из 14 301 подписчиков.
Согласно последним данным от 14 октября, 2026, канал показывает стабильную активность. За последние 30 дней изменение числа участников составило -89, а за последние 24 часа — 0, при этом общий охват остаётся высоким.
- Статус верификации: Не верифицирован
- Уровень вовлечённости (ER): Средний показатель вовлечённости аудитории составляет 7.32%. В первые 24 часа после публикации контент обычно набирает 5.12% реакций от общего числа подписчиков.
- Охват публикаций: В среднем каждый пост получает 1 047 просмотров. В течение первых суток публикация набирает 733 просмотров.
- Реакции и взаимодействия: Аудитория активно поддерживает контент: среднее количество реакций на один пост — 15.
- Тематические интересы: Контент сосредоточен на ключевых темах, таких как thread, battery, mouse, well, cell.
📝 Описание и контентная политика
Автор описывает ресурс как площадку для выражения субъективного мнения:
“Join chat for discussion.
This is a channel to collect and share information pertaining to living independent of the corrupt and broken system.
-Escape the control grid-”
Благодаря высокой частоте обновлений (последние данные получены 15 октября, 2026) канал поддерживает актуальность и высокий уровень охвата публикаций. Аналитика показывает, что аудитория активно взаимодействует с контентом, что делает его важной точкой влияния в категории Природа и животные.
14 301
Подписчики
Нет данных24 часа
-247 дней
-8930 дней
Архив постов
14 301
+1
How do you put a washing machine in a basement? You could plumb it to the grinder toilet you already have but that puts extra running time on that pump. How about a sump pump? Let the washing machine drain it's gray water into a 55gallon drum with a sump pump in it. Or you can buy a basin with a pump. Now you can pump that gray water outside or into your existing sewage line. I would make sure to use a water trap if connecting to the sewage line in your basement ceiling.
14 301
Here's a cut away drawing of what we're doing to prevent water from flowing across the concrete porch surface and into the basement. I'll use a diamond wheel to grind a groove around the perimeter of the house, shoot caulk in it, and set flashing inside.
14 301
We’ve programmed our local repeaters to not relay unscoped packets >10 hops away. We still see stations from Delaware and Georgia.
14 301
Repost from Purpose Driven Homestead
+4
The cattle were lined up yesterday to move to the next pasture. They have to cross a bridge through two gates to get there, but they were ready. They may get another grazing of these paddocks before winter, but I'm not sure. Ive already gotten so much more grazing this year out of the land than ever before. Its kind of crazy how much more. I plan on doing a video on the difference. You can see how much they have mowed down the paddock they left and how tall the grass is in the new pasture they entered. Happy cows right now. We havent started feeding hay yet to our beef herd this year but had in prior years before now.
For those who follow us regularly drop a comment on what month you think we started feeding hay the prior two years while we were shifting the farm to regenerative agriculture. The answer night surprise you.
14 301
Meshcore news
Tonight we limited the number of hops that about a dozen local repeaters will repeat. Traffic comes in heavier and heavier each night. We’ve started seeing stations from Louisiana and Texas here in SC.
So…. If someone in Ohio sends a packet without a region scope and its already been repeated 10 times it will not be repeated by the Florence sc repeaters.
If you specify a region such as us, us-sc, or us-southeast it will go up to 64 hops.
Translation: if you want to communicate with someone far away you should specify a region in your packets.
14 301
Amazing stuff.... a 32kwh battery drawn down at 200amps for an hour. And to think it has 628ah, so It could do this for another 2 hours. https://youtu.be/ekql33bxwkU
14 301
Yesterday we got a pallet of 70 sheets of "master rib" siding, the same stuff as on my workshop. We are replacing the vynil siding on the house as it has become brittle and has cracked in a few places.
When we originally installed the vynil we put a J channel at the bottom and caulked it down to the concrete porch surface. Although it is holding the j channel very nicely, it is not a 100% continuous bead of caulk. When we get a blowing rain it hits the siding and runs down and into the basement every once in a while.
I've decided to use a diamond saw to cut a 1/8" wide groove about 1/2" deep about 1inch from the wall into the concrete. We'll shoot a bead of caulk in there and set some Z flashing down into the groove. Once the caulk sets up, I'll finally have a continuous water repelling wall around the house.
We will then set the corrugated metal panel on top of the Z fashing and affix to the wall. Water hitting the panel will run down and around that z flashing.
I did a small section today as a test and a 4" diamond wheel on my battery grinder cuts like butter. I'll post pictures tomorrow. I've got to make a guide for the grinder. Looks like the hardest part is going to be cleaning up all the old caulk.
14 301
This repeater is up 400ft and covers a radius of about 14 miles (ignoring the outliers).
14 301
This repeater is up 65ft and is 6 miles south of I-20. It covers about 15 miles of I-20.
14 301
Moar brain dump. When you connect PV panels in parallel you can get away without fusing two strings. because even if one string of panels shorts out, they are engineered to accept twice as much current as they produce.
Check the label on any panel and you'll find numbers like Isc 13amps , fuse at 30amps.
However when you combine 3 or more strings of panels now you have a situation where one string could malfunction and the two neighbors could dump amps into it. So when you parallel 3 or more sets of panels you must fuse each individual string at the manufacturers spec (ie probably around 30amps).
There are inline fuse holders that have the MC4 connectors or you can use a combiner box with fuses or breakers.
14 301
Brain dump.... when connecting power sources in parallel you should fuse each power source individually. That way if something goes horribly wrong the malfunctioning unit can pop it's own fuse.
Telsa car batteries consist of 7700 individual 18650 or 2170 cells. Each one is connected to it's peers with a 5 amp fuse. If one cell malfunctions it will pop it's own fuse and the rest of the pack continues to operate.
None of the chinese manufacturers are fusing individual LFP 280 or 314 cells. They just strap them together and hope for the best.
14 301
+1
To follow up from my previous post... here is a picture of a 48kwh Panda battery. it has 3 314ah cells in parallel with no fusing between cells. If one cell were to short out, the other 2 peers would dump amps into it and likely make a lot of heat. This is poor engineering practice.
For comparison here's a picture of a yixaing 32kwh battery with individual MB56 cells. Much better, much safer.
14 301
Neighbor found on his property. Shot in the ass and ran away. Could not clear the fence because of his wound. There’s a hot line on top of that too. So poor guy flailed around getting shocked and gouged until he couldn’t do it any more.
Guys ethical kills please!
14 301
If you are going to order a 32kwh battery, be aware of three things:
1)It MUST use MB56 cells. Several manufacturers are placing two 314ah cells in parallel to make the capacity. This is NOT good engineering practice.
2)You might calculate that you need 32kwh and think you can buy one battery but that battery may be limited to 200amps. If you need 12kw out of your inverter, you will need 250amps and will fall short. In order to get 12kw you will likely need two of any battery.
3)There are many good deals on batteries that do not use JK BMS. If you get one of these you may have vendor lockin when it is time to add more. JK BMS is the universal standard. Vendor A battery will communicate with Vendor B as long as they use JKBMS.
14 301
This is the motherlode of ICF training. Watch the first, skip the next two and it gets detailed quickly. https://www.youtube.com/watch?v=DFYktAiOSF0&list=PLMFDU7ZHdfWpq4Nul1yohz3koxVQwKui8
