fa
Feedback

فریب کلاهبرداران را نخورید! تل‌متریو این کانال‌ها را شناسایی و برچسب‌گذاری می‌کند 👉 برای مشاهده برچسب، اشتراک تهیه کنید

Skoltech Engineering

Skoltech Engineering

رفتن به کانال در Telegram

Центр инженерных систем и наук Сколтеха. Инженерия, робототехника, авиа, космос, материалы — для науки и бизнеса. Skoltech Center for Engineering Systems & Sciences: engineering, robotics, aerospace & space, materials for science & business. 📮 @Ashigary

نمایش بیشتر
895
مشترکین
اطلاعاتی وجود ندارد24 ساعت
+37 روز
اطلاعاتی وجود ندارد30 روز
آرشیو پست ها
🛰 Space orbit as an open-access lab: Tatiana Podladchikova speaks at the "Space is Near" festival Associate Professor and Di
+1
🛰 Space orbit as an open-access lab: Tatiana Podladchikova speaks at the "Space is Near" festival Associate Professor and Director of Skoltech’s Center for Engineering Systems and Sciences Tatiana Podladchikova spoke at the opening of the youth festival. She proposed turning Earth's orbit into shared research infrastructure — making satellites as accessible to students, scientists, and businesses as cloud computing is today.
"One team builds the spacecraft, while thousands of others use its capabilities for new research. Space becomes a shared lab, and every launch turns from the end of a single mission into the start of hundreds of new discoveries. Universities can act as the scientific integrators of this system."
The initiative was supported by Deputy Minister of Science and Higher Education Dmitry Afanasyev, who noted that school students are already designing small satellites, and the next step is creating a unified program of tasks and users for this orbital constellation. ────── 🌐 ────── 🛰 Космическая орбита как лаборатория общего доступа: выступление Татьяны Подладчиковой на фестивале «Космос рядом» Астрофизик, доцент и директор Центра инженерных систем и наук Сколтеха Татьяна Подладчикова выступила на открытии молодёжного фестиваля. Она предложила сделать орбиту общей научной инфраструктурой — чтобы исследователи и студенты могли пользоваться спутниками так же просто, как сегодня работают с облачными сервисами.
«Одни создают космические аппараты. Тысячи других используют их возможности для новых исследований. Космос становится общей лабораторией — как сегодня облако стало общей вычислительной инфраструктурой. И тогда каждый запуск будет не завершением одной миссии, а началом сотен новых открытий. А университет может стать научным интегратором этой системы».
Идею поддержал заместитель министра науки и высшего образования РФ Дмитрий Афанасьев. Он отметил, что школьники уже сейчас проектируют малые аппараты, и следующим шагом станет формирование единой программы задач и пользователей для этой орбитальной группировки. #EngineeringCenter_news
20 نوامبر, 08:42

🗣️ We asked Nikita what he sees as the most complex and exciting challenge in building Flipper One:
"We're still in active development, so the hardest part is yet to come. In my view, the biggest challenge will be setting up thorough testing. First, keeping defect rates minimal on the production line given the board complexity and high component density. Second, organizing end-to-end integration testing across all user scenarios. Since the device interacts with a wide range of external hardware, we need to verify compatibility with as many popular monitors, Wi-Fi routers, PD chargers, and other gear as possible."
────── 🌐 ────── 🗣️ Спросили у Никиты, какая задача в работе над Flipper One кажется ему самой сложной и интересной:
«Мы всё ещё в процессе разработки, так что самое сложное впереди. На мой взгляд, главный вызов — организовать качественное тестирование. Во-первых, нужно обеспечить минимальный брак на производственной линии из-за сложности плат и высокой плотности монтажа. Во-вторых — выстроить интеграционное тестирование всех пользовательских сценариев. Устройство взаимодействует с большим количеством внешней техники, поэтому нужно по максимуму проверить совместимость с самыми популярными мониторами, Wi-Fi-роутерами, PD-зарядками и так далее».
20 نوامبر, 04:20

Flipper One has already raised over €13.2 million on Kickstarter—nearly 48 times its original funding goal. Our alumnus Nikit
+1
Flipper One has already raised over €13.2 million on Kickstarter—nearly 48 times its original funding goal. Our alumnus Nikita Gorbadei, a Eurobot World Championship silver medalist, is one of Flipper's core developers. ────── 🌐 ────── Flipper One собрал на Kickstarter уже более 13,2 млн евро — это почти в 48 раз превышает изначально запланированную цель. Наш выпускник Никита Горбадей, серебряный призёр мира по «Евроботу», — один из ключевых разработчиков Flipper.
20 نوامبر, 03:41

🛰 About CubeSats: how the 10×10×10 cm satellite standard began We’re launching a series of short posts titled About CubeSats
🛰 About CubeSats: how the 10×10×10 cm satellite standard began We’re launching a series of short posts titled About CubeSats. CubeSat is the exact format our Microsatellite Systems Laboratory (Skoltech Center for Engineering Systems and Sciences) is using to build our upcoming Skoltech-F satellite. Here, we will share what makes these satellites unique, how they are built, and insider details from our lab. You can follow all posts in the series under #CubeSat How did this standard come about?
Two US professors invented the format in 1999 so university students could design and launch real satellites during their studies. Just four years later, on June 30, 2003, the very first six CubeSats went into orbit from the Russian Plesetsk Cosmodrome. A basic unit (1U) is a standard 10×10×10 cm cube weighing up to 2 kg (or 1.33 kg in the original spec). Like building blocks, these units stack together into 3U, 6U, or 12U formats to fit more cameras and sensors. For our Skoltech-F project, we use the 3U format—three cubes combined. In the next posts, we will break down the spacecraft's anatomy, its pros and cons, and where CubeSats are used today!"
📸 AAU CubeSat was one of the first CubeSats ever built. It launched in 2003 from Russia's Plesetsk Cosmodrome. ────── 🌐 ────── 🛰 О кубсатах: как появился стандарт спутников формата 10×10×10 см Запускаем серию коротких постов «О кубсатах» — именно в этом формате в лаборатории микроспутниковых систем (Центр инженерных систем и наук Сколтеха) создается наш будущий спутник Skoltech-F. Здесь мы будем рассказывать, как устроены такие аппараты, в чем их главные фишки, и делиться инсайдами разработки. Все выпуски серии можно будет найти по тегу #CubeSat. Как появился этот стандарт?
Формат придумали в 1999 году в США двое профессоров, чтобы студенты могли проектировать и запускать в космос настоящие спутники прямо во время учебы. А уже 30 июня 2003 года первые шесть кубсатов отправились на орбиту с российского космодрома Плесецк. Базовый элемент (1U) — это стандартный куб размером 10×10×10 см и весом до 2 кг (или 1,33 кг по ранней спецификации). Как детали конструктора, эти «юниты» стыкуются друг с другом в форматы 3U, 6U или 12U, чтобы вместить больше камер, датчиков и научных приборов. В нашем проекте мы используем формат 3U — то есть три кубика, собранных вместе. В следующих постах расскажем о внутреннем строении аппарата, его сильных и слабых сторонах, а также о том, какие задачи он решает!
📸 AAU CubeSat стал одним из первых в истории спутников формата кубсат. Его запустили в 2003 году с российского космодрома Плесецк. #EngineeringCenter_expert #CubeSat
19 نوامبر, 08:54

🎓 November 19 is Higher Education Teachers' Day in Russia! Happy holiday to everyone who teaches, mentors, and inspires a ne
🎓 November 19 is Higher Education Teachers' Day in Russia! Happy holiday to everyone who teaches, mentors, and inspires a new generation of engineers and researchers! 👏 Meet the faculty behind our programs: • MSc in Engineering Systems: Aerospace, Robotics, Digital Design • PhD in Engineering Systems ────── 🌐 ────── 🎓 19 ноября — День преподавателя высшей школы! Всех причастных с праздником! Спасибо за знания, наставничество и вдохновение для нового поколения инженеров и ученых 👏 Посмотреть, кто преподает на наших программах: • Магистратура «Инженерные системы: аэрокосмос, робототехника, цифровое проектирование» • Аспирантура «Инженерные системы» #EngineeringCenter_news
19 نوامبر, 04:50

☀️ Tatiana Podladchikova to speak at the "Space is Near" festival on November 19! Tomorrow, Director of Skoltech’s Center for
☀️ Tatiana Podladchikova to speak at the "Space is Near" festival on November 19! Tomorrow, Director of Skoltech’s Center for Engineering Systems and Sciences Tatiana Podladchikova will take part in the "Space is Near" festival — the flagship event of the federal "Talents for Space" program held at HSE University in Moscow (November 19–20). Program highlights with Tatiana: Panel discussion: "Talents for Space: From an Idea to a Real Project" Talk: "The Obvious and Incredible Mysteries of the Sun" (in the "Space: The Obvious and the Incredible" section) Admission is free! For more details and to register, click the link. ────── 🌐 ────── ☀️ Татьяна Подладчикова выступит на фестивале «Космос рядом» 19 ноября!   Завтра директор Центра инженерных систем и наук Сколтеха Татьяна Подладчикова примет участие в фестивале «Космос рядом» — центральном событии федеральной программы «Таланты для космоса», которое пройдет в Москве на площадке НИУ ВШЭ (19–20 ноября). В программе с участием Татьяны: Панельная сессия: «Таланты для космоса: от идеи до реального проекта» Доклад: «Очевидные и невероятные загадки Солнца» (в секции «Космос: очевидное невероятное») Участие бесплатное! Подробности и регистрация по ссылке. #EngineeringCenter_news #EngineeringCenter_events
18 نوامبر, 09:48

+4
🤖 Inside Yandex Robotics: warehouse automation and meeting Engineering Systems alumni! Dzmitry Tsetserukou, Head of the Intelligent Space Robotics Laboratory, visited Yandex Robotics for an inside tour of their warehouse robotics. He shared a few photos and videos of the automated systems in action — and by the way, plenty of graduates from our Engineering Systems program are now building the tech behind the scenes there! ────── 🌐 ────── 🤖 В гостях у Яндекс Роботикс: складские роботы и встреча с выпускниками нашей программы «Инженерные системы»! Руководитель Лаборатории интеллектуальной космической робототехники Дмитрий Тетерюков побывал на экскурсии в Яндекс Роботикс. Дмитрий поделился кадрами складской робототехники в действии — и, кстати, в компании сейчас работает немало выпускников программы «Инженерные системы»! #EngineeringCenter_inside
18 نوامبر, 04:49
18 نوامبر, ~05:40

🛰 Skoltech researchers and engineers featured in a TV Zvezda news segment! Associate Professor Tatiana Podladchikova (Direct
+2
🛰 Skoltech researchers and engineers featured in a TV Zvezda news segment! Associate Professor Tatiana Podladchikova (Director of Skoltech’s Center for Engineering Systems and Sciences), Pavel Kolesnikov (Head of the Microsatellite Lab), and Research Engineer Sarra Mongush took part in a report for the Glavnoe s Olgoy Belovoy news program on TV Zvezda. They discussed the future of space engineering and training a new generation of specialists.
Key highlights from the segment: 🔹Tatiana Podladchikova explained how the "Personnel for Space" project brings students, scientists, and engineers together to build real satellites, bridging education and industry needs. 🔹Pavel Kolesnikov introduced the Skoltech-F mission — which studies how the space environment affects electronic memory — and highlighted the advantages of CubeSats for hands-on student training. 🔹Sarra Mongush demonstrated the satellite attitude determination and control system developed for the project.
Watch the full story here. Watch starting at 01:25:00. ────── 🌐 ────── 🛰 Исследователи и инженеры Сколтеха в сюжете телеканала «Звезда»! Директор Центра инженерных систем и наук Сколтеха Татьяна Подладчикова руководитель Лаборатории микроспутниковых систем Павел Колесников и инженер-исследователь Сарра Монгуш приняли участие в сюжете программы «Главное с Ольгой Беловой». Команда рассказала о будущем космической инженерии и о том, как сегодня готовят новое поколение специалистов.
Главное из выпуска: 🔹Татьяна Подладчикова рассказала, как проект «Кадры для космоса» объединяет студентов, ученых и инженеров для создания реальных аппаратов, связывая образование с запросами индустрии. 🔹Павел Колесников представил миссию Skoltech-F (исследование влияния космоса на электронную память) и объяснил, почему формат кубсатов идеален для обучения будущих разработчиков. 🔹Сарра Монгуш показала систему ориентации и стабилизации спутника, разработанную для этого проекта.
Смотрите полный сюжет здесь. Смотреть с 01:25:00. #EngineeringCenter_news
17 نوامبر, 10:08

🎓 Henni Ouerdane has been appointed Dean of Education at Skoltech! Henni Ouerdane, Associate Professor at the Center for Eng
🎓 Henni Ouerdane has been appointed Dean of Education at Skoltech! Henni Ouerdane, Associate Professor at the Center for Engineering Systems and Sciences and Head of the Energy Conversion Physics and Technology Research Group, will now lead Skoltech's Education Department. About Henni: 🔹Earned his PhD in Physics from Heriot-Watt University (Edinburgh) and held research positions in France, Ireland, and the UK before joining Skoltech in 2017. 🔹Focuses on non-equilibrium thermodynamics, thermoelectricity, quantum systems, and energy-efficient technologies. 🔹Chairs the Academic Council's Committee on Education and the Engineering Systems PhD Program Committee, connecting fundamental physics with practical energy applications. Congratulations on the new role, and wishing you great success ahead! 👏 ────── 🌐 ────── 🎓 Хенни Уэрдан назначен проректором по учебной работе Сколтеха! Доцент Центра инженерных систем и наук Сколтеха и руководитель Научной группы физики и технологий преобразования энергии Хенни Уэрдан возглавит Департамент образования университета. О Хенни: 🔹Получил степень PhD по физике в Университете Хериот-Уатт в Эдинбурге. До прихода в Сколтех в 2017 году занимал научные должности во Франции, Ирландии и Великобритании. 🔹В науке фокусируется на неравновесной термодинамике, термоэлектричестве, квантовых системах и энергоэффективных технологиях. 🔹Возглавляет Комитет по образованию при Академическом совете Сколтеха и руководит Комитетом аспирантской программы «Инженерные системы», связывая фундаментальную физику с реальными задачами в энергетике. Поздравляем коллегу и желаем больших успехов на новой должности! 👏 📸 Timur Sabirov / Тимур Сабиров
16 نوامبر, 09:36

🛰 Master's student Egor Piatibrat investigated the applicability of the single-launch method for deploying satellite constel
+1
🛰 Master's student Egor Piatibrat investigated the applicability of the single-launch method for deploying satellite constellations via the L1 libration point, as proposed by S. Carletta." At “Industry Day,” a master’s student in the “Engineering Systems” program presented the results of his summer internship.
What was done: Egor investigated the applicability of the single-launch method for deploying lunar satellite constellations via the L₁ libration point, as proposed by S. Carletta of La Sapienza University of Rome. The method was initially developed and validated in a circular restricted three-body problem. Egor implemented the sequence of maneuvers for the deployment strategy in a software suite integrated with the GMAT simulator and tested it using complete ephemerides. Simulations showed that the deployment method needs to be significantly refined in the full model. The method relies on local integrals of motion near L₁, that is, on quantities that are conserved only in the simplified model. In the full ephemeris, these values change noticeably under the influence of the Sun’s gravitational pull and the ellipticity of the Moon’s orbit. Therefore, maneuvers calculated in the simplified formulation provide only a rough initial approximation.
────── 🌐 ────── 🛰 Магистрант Егор Пятибрат исследовал применимость однопускового метода для разверытывания спутниковых группировок через точку либрации L1, предложенного С. Карлеттой" На «Дне индустрии» магистрант программы «Инженерные системы» показал результаты своей летней практики.
Что сделано: Егор исследовал применимость однопускового метода развёртывания окололунных спутниковых группировок через точку либрации L₁, который предложил С. Карлетта из Римского университета Ла Сапиенца. Изначально метод разработан и валидирован в круговой ограниченной задаче трёх тел. Егор реализовал последовательность манёвров стратегии развёртывания в программном комплексе, интегрированном с симулятором GMAT, и проверил её на полных эфемеридах. Моделирование показало, что в полной модели методику развёртывания нужно существенно уточнять. Метод опирается на локальные интегралы движения вблизи L₁, то есть на величины, которые сохраняются только в упрощённой модели. На полных эфемеридах они заметно меняются под действием притяжения Солнца и эллиптичности орбиты Луны. Поэтому манёвры, рассчитанные в упрощённой постановке, дают лишь грубое начальное приближение.
16 نوامبر, 08:18

The Rise of Machines in Skoltech 16.11.2026 😀⚙️🤖 Monday.....🦾 ────── 🌐 ────── «Восстание машин» в Сколтехе 16.11.2026 😀⚙️🤖 Понедельник.....🦾
16 نوامبر, 02:45

The Rise of Machines in Skoltech 16.11.2026 😀⚙️🤖 Monday.....🦾 ────── 🌐 ────── «Восстание машин» в Сколтехе 16.11.2026 😀⚙️🤖 Понедельник.....🦾
16 نوامبر, 02:45
16 نوامبر, ~02:45

The Rise of Machines in Skoltech 16.11.2026 😀⚙️🤖 Monday.....🦾 ────── 🌐 ────── «Восстание машин» в Сколтехе 16.11.2026 😀⚙️🤖 Понедельник.....🦾
16 نوامبر, 02:44
16 نوامبر, ~02:45

The Rise of Machines in Skoltech 16.11.2026 😀⚙️🤖 Monday.....🦾 ────── 🌐 ────── «Восстание машин» в Сколтехе 16.11.2026 😀⚙️🤖 Понедельник.....🦾
16 نوامبر, 02:44
16 نوامبر, ~02:44

13 نوامبر, 11:47

🌌 Would you travel to see the Northern Lights? / Отправились бы вы в путешествие ради северного сияния?
Anonymous voting
13 نوامبر, 11:45
13 نوامبر, ~11:45

🌌 Can you predict the Northern Lights for your vacation? Tatiana Podladchikova explains on Rossiya 1 TV! Associate Professor
+1
🌌 Can you predict the Northern Lights for your vacation? Tatiana Podladchikova explains on Rossiya 1 TV! Associate Professor, astrophysicist, and Director of Skoltech’s Center for Engineering Systems and Sciences Tatiana Podladchikova appeared on the "Utro Rossii" morning show to discuss the science behind the growing aurora-hunting tourism in Murmansk. Key takeaways from the broadcast:
🔹 How it works: When a magnetic cloud of solar plasma reaches Earth, the magnetic fields of the Sun and our planet can reconnect. Just like railway switches changing tracks, magnetic reconnection redirects charged particles along magnetic field lines toward the poles. There, they excite oxygen and nitrogen atoms, painting the sky in vibrant colors. 🔹 Why auroras are so hard to predict: Accurately predicting an aurora a month, a week, or even three days in advance is impossible. We can only estimate the probability: when an active region with a complex magnetic field appears near the center of the solar disk, the likelihood of a solar eruption increases. But even a powerful eruption heading straight toward Earth doesn't guarantee an aurora! It all depends on whether Earth's magnetosphere allows solar energy to enter. And satellite measurements can reveal this only about 1–2 hours in advance.
────── 🌐 ────── 🌌 Можно ли точно предсказать северное сияние под отпуск? Татьяна Подладчикова рассказала в эфире программы «Утро России» на телеканале «Россия 1»! Астрофизик, доцент и директор Центра инженерных систем и наук Сколтеха Татьяна Подладчикова стала экспертом выпуска, посвященного популярности туров за полярным сиянием в Мурманске, физике этого явления и сложностям его прогноза. Главное из эфира:
🔹 Как возникает сияние: Когда магнитное облако солнечной плазмы достигает Земли, магнитные поля Солнца и нашей планеты могут пересоединиться. Словно на железной дороге переключаются стрелки — и заряженные частицы устремляются вдоль магнитных силовых линий к полюсам. Там они возбуждают атомы кислорода и азота, раскрашивая небо в яркие цвета. 🔹 В чём сложность прогноза: Точно предсказать сияние ни за месяц, ни за неделю, ни даже за три дня невозможно. Заранее можно оценить лишь вероятность: если в центре солнечного диска появляется активная область со сложным магнитным полем, вероятность солнечного выброса возрастает. Но даже мощный выброс, летящий прямо к Земле, не гарантирует сияния! Всё зависит от того, пропустит ли магнитосфера Земли солнечную энергию. А узнать это по спутниковым измерениям можно лишь за 1–2 часа.
📸 Freepik
13 نوامبر, 11:03

💪 Strength of mind and iron: Prof. Dr. Sci. Pavel Osinenko qualifies as a Candidate for Master of Sports in powerlifting Pav
+1
💪 Strength of mind and iron: Prof. Dr. Sci. Pavel Osinenko qualifies as a Candidate for Master of Sports in powerlifting Pavel Osinenko (in the center of the photo), Doctor of Physical and Mathematical Sciences, an associate professor at Skoltech’s Center for Engineering Systems and Sciences and head of the Laboratory for Dynamic Systems in Artificial Intelligence at the Central University, has proven that success in science can be successfully combined with outstanding achievements in sports.
At the Central Federal District (CFD) Powerlifting Championship in Tula, the scientist demonstrated excellent physical condition and successfully met the stringent, updated standards required to earn the “Candidate for Master of Sports of the Russian Federation” (KMS) title. Unequipped powerlifting requires concentration, strength, and flawless technique in three basic exercises: the barbell squat, the bench press, and the deadlift. Pavel has once again confirmed his status as a competitive athlete, proving that intellectual work and heavy sport can complement each other. We congratulate Pavel and wish him new victories both in science and on the competition stage!
────── 🌐 ────── 💪 Сила интеллекта и железа: доктор физ.-мат. наук Павел Осиненко выполнил новый норматив КМС по пауэрлифтингу. Доцент Центра инженерных систем и наук Сколтеха и руководитель Лаборатории динамических систем ИИ Центрального Университета Павел Осиненко (на фото в центре) доказал, что успехи в науке можно совмещать с достижениями в спорте.
На чемпионате Центрального федерального округа (ЦФО) по безэкипировочному пауэрлифтингу в Туле ученый продемонстрировал отличную физическую форму и успешно выполнил жёсткие обновлённые нормативы для присвоения спортивного разряда «Кандидат в мастера спорта РФ» (КМС). Пауэрлифтинг без экипировки требует от атлета концентрации, силы и безупречной техники в трех базовых упражнениях: приседании со штангой, жиме лежа и становой тяге. Павел в очередной раз подтвердил статус выступающего спортсмена, показав, что интеллектуальный труд и тяжелый спорт могут дополнять друг друга. Поздравляем Павла и желаем ему новых побед как на научном фронте, так и на помосте!
13 نوامبر, 05:25

🔋 Model shows factories and employees can profit from idle car batteries at work Ahmed Eltwam, a PhD student in the Engineer
🔋 Model shows factories and employees can profit from idle car batteries at work Ahmed Eltwam, a PhD student in the Engineering Systems program, is the lead author of a new study published in Applied Energy, co-authored with Associate Professor Marina Dolmatova from the Center for Energy Science and Technology. The core idea: While employees are at work, their parked EVs can supply power back to the factory (vehicle-to-grid) alongside on-site solar panels. The researchers built an optimization model that helps businesses calculate if such investments pay off. The framework accounts for electricity billing rules, battery limits, and crucially whether drivers are actually willing to participate for financial incentives. For details and calculations, see the news article on the website. The Applied Energy is ranked among the top 2% of journals in the Energy Management and Policy category, with an Impact Factor of 12.2 and a CiteScore of 22.1. ────── 🌐 ────── 🔋 Модель показала, как заводы и сотрудники могут получать выгоду от простаивающих на работе аккумуляторов электромобилей Аспирант программы «Инженерные системы» Центра инженерных систем и наук Сколтеха Ахмед Эльтвам стал первым автором нового исследования, опубликованного в журнале Applied Energy в соавторстве с доцентом Мариной Долматовой из Центра энергетических наук и технологий. В чем суть: Пока сотрудники работают, их припаркованные электрокары могут отдавать энергию обратно в сеть предприятия (технология vehicle-to-grid) в связке с солнечными панелями. Исследователи разработали оптимизационную модель, которая помогает бизнесу заранее оценить окупаемость таких систем. Модель учитывает тарифы, износ батарей и главное — реальную готовность водителей участвовать в программе за денежное вознаграждение. Подробности и расчеты — в новости на сайте. Журнал «Applied Energy» входит в число 2 % лучших журналов в категории «Управление энергетикой и энергетическая политика», его индекс влияния составляет 12,2, а показатель CiteScore — 22,1.
12 نوامبر, 09:18

💻 Industry trends in Digital Twins: insights from the conference! Research Engineer Dmitry Ershenko from the Intelligent Eng
💻 Industry trends in Digital Twins: insights from the conference! Research Engineer Dmitry Ershenko from the Intelligent Engineering Systems Lab attended the "Integrated Digital Twins" conference and shared his main takeaways on where the market is heading:
"The event was crucial for understanding real industry needs. Most speakers shared practical cases of implementing Digital Twins in oil and gas, construction, and even urban management. The main trend connecting both days of the conference was AI agents and multi-agent systems. Right now, there is a huge demand from businesses to adopt these technologies."
────── 🌐 ────── 💻 Индустриальные тренды в цифровых двойниках: главные инсайты с конференции! Инженер-исследователь Лаборатории интеллектуальных инженерных систем Дмитрий Ершенко побывал на конференции «Интегрированные Цифровые Двойники» и поделился впечатлениями о том, куда сейчас движется рынок:
«Мероприятие важно с точки зрения понимания реальных запросов бизнеса. Большинство спикеров показывали практический опыт внедрения цифровых двойников в нефтегазовой сфере, строительстве и даже городском управлении. Главным трендом обоих дней стали ИИ-агенты и мультиагентные системы. Сейчас со стороны индустрии есть огромный запрос на внедрение этих технологий».
11 نوامبر, 09:34