2 958
Subscribers
No data24 hours
+67 days
+5830 days
Posts Archive
2 958
2 958
2 958
2 958
2 958
Flexural Design of Reinforced Concrete Beam Section: Calculating Tension and Compression Reinforcement Areas (𝗔𝘀 and 𝗔𝘀') as per Eurocode 2.
_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲_̲
Here is the brief calculation of defining requirement areas (As and As'):
𝟭. Determine the design moment, MEd, acting on the beam section (or given)
𝟮. Define the material properties( fck, fyk, Es, γc, γs, fcd, fyd, εyd, εcu3, λ, η, ...)
𝟯. Calculate the limited height of compression x_max =min(x_max1,x_max2), where x_max1 and x_max2 is defined in (Eq. 5.10a and 5.10b) and limitation due to limit the min stain of reinforcement εyd)
𝟰. Verify that As' is needed in the design or not (MRd = Cc× z). Then Calculate the area of reinf., it follows 2 cases
+ Case 1: Case MRd ≥ MEd (As' is not required), calculate only As=
+ Case 2: Case MRd of reinforcement in the tension zone ≤ MEd
𝟱. Verify with As,min and As,max
𝟲. Choose the reinforcement (It must be greater than the required reinforcement bar)
_________________________________
Telegram | Group | Facebook
2 958
✓ Fosroc Admixtures : Corrosion Inhibitor, Waterproofing, Water Reducing & Retarding
✓ Fosroc Waterproofing solutions : Liquid applied, Sheet membrane, Waterstops
✓ Fosroc Grouts and Anchors : Cementitious grouts, Epoxy grouts, Lokfix E range
✓ Fosroc Concrete Repairs : Repair mortar & Concrete, Crack injection grouts
✓ Fosroc Industrial Floorings & Protective Coatings : Floor hardener, Epoxy coatings, Epoxy floorings
✓ Fosroc Joint sealants & Joint fillers : Building sealants, Civil Engineering sealants
✓ Fosroc Adhesives : Concrete bonding agents, Tile grout & Adhesive
2 958
Design of Composite Steel and Concrete Structures_ LIM Sovanvichet _ អឺរ៉ូកូដ ៤ គណនាគ្រោងកុំប៉ូស៊ីតដកបេតុង
