Вже доступно! Дослідження Telegram за 2025 — головні інсайти року 
Embedded Systems
Відкрити в Telegram
News, articles, guides, analytics, projects and startups from the embedded industry. Topics of the channel: ◽️ machine learning ◽️ internet of things ◽️ embedded software ◽️ advanced electronics ◽️ new engineering ideas ⤵️ Share and subscribe!
Показати більше📈 Аналітичний огляд Telegram-каналу Embedded Systems
Канал Embedded Systems (@embedded_system) у мовному сегменті Англійська є активним учасником. На даний момент спільнота об'єднує 13 727 підписників, посідаючи 9 339 місце в категорії Технології та додатки та 45 місце у регіоні Нідерланди.
📊 Показники аудиторії та динаміка
З моменту свого створення невідомо, проект продемонстрував стрімке зростання, зібравши аудиторію у 13 727 підписників.
За останніми даними від 24 червня, 2026, канал демонструє стабільну активність. Хоча за останні 30 днів спостерігається зміна кількості учасників на 115, а за останні 24 години на 14, загальне охоплення залишається високим.
- Статус верифікації: Не верифікований
- Рівень залученості (ER): Середній показник залученості аудиторії становить 17.34%. Протягом перших 24 годин після публікації контент зазвичай збирає N/A% реакцій від загальної кількості підписників.
- Охоплення публікацій: В середньому кожен допис отримує 2 381 переглядів. Протягом першої доби публікація в середньому набирає 0 переглядів.
- Реакції та взаємодія: Аудиторія активно підтримує контент: середня кількість реакцій на один пост – 10.
- Тематичні інтереси: Контент зосереджений навколо ключових тем, таких як programming, microcontroller, battery, pcb, pico.
📝 Опис та контентна політика
Автор описує ресурс як майданчик для висловлення суб'єктивної думки:
“News, articles, guides, analytics, projects and startups from the embedded industry.
Topics of the channel:
◽️ machine learning
◽️ internet of things
◽️ embedded software
◽️ advanced electronics
◽️ new engineering ideas
⤵️ Share and subscribe!”
Завдяки високій частоті оновлень (останні дані отримано 25 червня, 2026), канал підтримує актуальність та високий рівень охоплення публікацій. Аналітика показує, що аудиторія активно взаємодіє з контентом, що робить його важливою точкою впливу в категорії Технології та додатки.
13 727
Підписники
+1424 години
Немає даних7 днів
+11530 день
Архів дописів
13 723
📚 Anastasia Veloni, Alex Palamides - Control System Problems (2012)
The text covers servomechanisms, hydraulics, thermal control, mechanical systems, and electric circuits. It explains the modeling process, introduces the problem solution, and discusses derived results. Presented solutions are based directly on math formulas, which are provided in extensive tables throughout the text. This enables readers to develop the ability to quickly solve practical problems on control systems.
#books #control
13 723
+2📹 Building a Stereoscopic Camera With the Raspberry Pi 4 Compute Module
StereoPi is an open-source stereoscopic camera based on Raspberry Pi. It can capture, save, livestream, and process real-time stereoscopic video and images. StereoPi opens up countless possibilities in robotics, AR/VR, computer vision, drone instrumentation, panoramic video, and more.
More information:
The development
CrowdSuppy page
#raspberry #camera
13 723
📟 Control ESP32 and ESP8266 GPIOs from Anywhere in the World
In this project you’ll learn how to control your ESP32 or ESP8266 GPIOs from anywhere in the world. This can be very useful to control a relay, a thermostat, or any other device remotely.
To build this project, you’ll use these technologies:
▫️ ESP32 or ESP8266 programmed with Arduino IDE
▫️ Hosting server and domain name
▫️ PHP scripts to store and retrieve the output states stored in a MySQL database
More information...
#projects #esp32 #IoT
13 723
💻 Top 15 Languages for Embedded Systems Programming
Since programmers face different resource constraints during embedded systems programming, they often tend to choose languages that have a very low memory footprint. Old-school programming languages that offer very low-level access to hardware are the best fit for such developments. Below, we’re outlining the 15 best languages for programming your next embedded system.
More information...
#news #programming #software
13 723
🖥 PID controller implementation by using C++
Short article that gives plain and simple explanation on work of PID controller (widely used in control systems). Provides the C++ code with explanations, all the necessary formulas, etc.
More information...
#programming #PID #control #cpp #beginner
13 723
🎬 Tutorial: How to easily model robots using ONSHAPE
We live in a time where our phones have computing power that would have been the envy of NASA a few decades ago. So, in theory, we should be able to simulate just about anything. Thanks to [rhoban], robots you design in OnShape — a popular CAD tool — are now easier to simulate using several common simulation tools.
https://youtu.be/C8oK4uUmbRw
#video #robots #design #3D_modeling
13 723
📚 Bert Moons, Daniel Bankman, Marian Verhelst - Embedded Deep Learning (2019)
This book covers algorithmic and hardware implementation techniques to enable embedded deep learning. The authors describe synergetic design approaches on the application-, algorithmic-, computer architecture-, and circuit-level that will help in achieving the goal of reducing the computational cost of deep learning algorithms. The impact of these techniques is displayed in four silicon prototypes for embedded deep learning.
#books #machine_learning
13 723
🤖 Telegram Bot: ESP32-CAM Take and Send Photo
In this tutorial, you’ll create a Telegram bot to interact with the ESP32-CAM to request a new photo.
Here’s an overview of the project you’ll build:
▫️ You’ll create a Telegram bot for your ESP32-CAM;
▫️ You can start a conversation with the ESP32-CAM bot;
▫️ When you send the message
/photo to the ESP32-CAM bot, the ESP32-CAM board receives the message, takes a new photo and responds with that photo;
▫️ You can send the message /flash to toggle the ESP32-CAM’s LED flash;
▫️ You can send the /start message to receive a welcome message with the commands to control the board;
▫️ The ESP32-CAM will only respond to messages coming from your Telegram account ID.
More information...
#projects #bot #esp32 #camera #IoT13 723
📟 STM32U5 Cortex-M33 MCU gets more performance, 2D graphics accelerator, and advanced security
The new family has a higher 160 MHz clock speed, up to 2048 KB flash, up to 786 KB RAM, a 2D graphics accelerator, several peripherals have been upgraded, and a new autonomous mode lets DMA and peripherals keep working while most of the device sleeps in order to save power. STM32U5 MCUs also integrate additional hardware security features, and are manufactured using a 40nm process, which the company says is the most advanced process suitable for microcontrollers.
The new STM32U5 microcontrollers will be supported by the STM32Cube software suite that includes Azure RTOS (aka ThreadX), STM32CubeMX, and STM32CubeIDE tools, as well as code examples. Third-party IDEs such as IAR Embedded Workbench and MDK-ARM are also supported.
More information...
#news #boards #stm32
13 723
+4📺 In-Dash GPS Navigation with Raspberry Pi 3
The article shows the process of development of the GPS navigator for a car using Raspberry Pi 3 with Navit (uses OpenStreetMap for map data). Includes 3D development of the case for device, schematics, code, etc.
More information...
#projects #gps #raspberry
13 723
🔭 Laser Projected Asteroids on the ESP32
The article (with video) describes the process of recreating of classic old game for laser projection using esp32 controller. The project includes both schematics and explained software part with detailed explanations. The game is implemented using the Esspressif IDF using PlatformIO to build and deploy.
"All in all, it's a pretty successful project. Even with my very low power 5mw laser, I can get around 2m x 2m projection at a good brightness in a dark room."
More information:
▫️ Video explanation
▫️ Code for the project
▫️ Schematic Files
#projects #esp32 #display #laser
13 723
+3🎛 Tiny 2040 – Pimoroni
Pimoroni has officially launched its Tiny RP2040, an ultra-compact competitor to the Raspberry Pi Pico.
The Tiny 2040 uses the same Raspberry Pi RP2040 microcontroller as the Pico, running its two Arm Cortex-M0+ cores at the same 133MHz+ clock speed and with the same 264kB of static RAM (SRAM). From there, the two diverge considerably: The Tiny 2040 is an ultra-compact design the size of a UK postage stamp with 12 general-purpose input/output (GPIO) pins, an on-board switch, user-controllable RGB LED, and 8MB of quad-SPI flash with execute-in-place (XIP) capabilities.
Specifications:
▫️ Powered by RP2040
▫️ ARM Cortex M0+ running at up to 133Mhz
▫️ 264kB of SRAM
▫️ USB-C connector for power, programming, and data transfer
▫️ 8MB of QSPI flash supporting XiP
▫️ User controllable RGB LED
▫️ Twelve IO pins (including four 12-bit ADC channels)
▫️ Switch for basic input (doubles up as DFU select on boot)
▫️ On-board 3V3 regulator
More information:
▫️News link
▫️Store link
#boards #news
13 723
📟 ESP32 Deep Sleep mode using Arduino IDE
This article is a complete guide for the ESP32 Deep Sleep mode with Arduino IDE. We’ll show you how to put the ESP32 into deep sleep and take a look at different modes to wake it up: timer wake up, touch wake up, and external wake up. This guide provides practical examples with code, code explanation, and schematics.
Having your ESP32 running on active mode with batteries it’s not ideal, since the power from batteries will drain very quickly. If you put your ESP32 in deep sleep mode, it will reduce the power consumption and your batteries will last longer.
More information...
#projects #esp32
13 723
📺 30 FPS FLIP-DOT display controlled by ESP32
The article describes the process of development of a novel type of display (which has a lot of advantages) based on magnetic induction and the way it can be controlled by ESP32 microcontroller.
There are tiny magnets hidden inside each flat dots. Basically, to flip a dot, you have to flow an electrical current into the coil, generating a magnetic field around it. The direction this current flows will flip the dot from one position to the other. Only a short pulse of current is needed. The electromagnet core stays polarized, keeping the dot on position, even when the power is gone.
More information:
▫️ Main article
▫️ Code & schematics
#projects #esp32 #display
13 723
🎥 ESP32-CAM Video Streaming Web Server
In this project we’re going to build an IP surveillance camera with the ESP32-CAM board. The ESP32 camera is going to host a video streaming web server that you can access with any device in your network.
You can integrate this video streaming web server with popular home automation platforms like Home Assistant or Node-RED. In this tutorial, we’ll show you how to integrate it with Home Assistant and Node-RED.
More information...
#projects #camera #esp32 #web
13 723
📟 Augmented reality on the cheap with ESP32
The author of the following article designed and built VR glasses around a 3D printed frame, ESP32, cheap LCDs, and lenses from a pair of sunglasses. The electronics is packed horizontally in the top of the frame, with the displays pointed down into a pair of angled mirrors, which reflect the image onto the sunglasses lenses and into the user’s eyes.
Then he tested a number of different lenses and found that a thin lens with a slight curve worked best. The ESP32 doesn’t actually run the main software, it just handles displaying the images on the LCDs. The images are sent from a computer running software written in Processing.
Besides just displaying images, the software can also integrate inputs from a MPU6050 IMU and ESP32 camera module mounted on the goggles. This allows the images to shift perspective as the goggles move, and recognize faces and AR markers in the environment.
More information...
#projects #vitrual_reality #esp32
13 723
🎬 How to use the two Cores of the Pi Pico?
The new Pi Pico has two cores. How can we use both? And: If you want to play with the Pico, this video can save you a lot of time because we will discover the main differences between programming an Arduino and a Pi Pico. After this video, you will know more than 99% of all Pi Pico users. And you know how to avoid some quirks.
https://youtu.be/9vvobRfFOwk
#video #raspberry #pico
13 723
📥 Porting Fuzix to the ESP8266
In addition to the previous post, one more guide describing the port of the FuzixOS on the popular development board ESP8266.
The system supports:
▫️ user binaries with up to 31.5kB of code and 64kB of data
▫️ a proper Unix filesystem (files, directories, mostly unlimited sizes, etc)
▫️ SD card and NAND flash support — the latter via the Dhara FTL library
▫️ 80MHz clock (can be increased; the ESP8266 can go up to about 350MHz)
More information...
#projects #esp8266 #fuzix #software #operating_systems
13 723
📥 Porting Fuzix on the Raspberry Pi Pico
As Linux does not work on Raspberry Pi Pico, the author of this article has shown how to port FuzixOS on this development board.
The Fuzix port has a lot of interesting features:
▫️ user binaries using up to 64kB of code and data each (this could be expanded, as there’s plenty of spare RAM)
▫️ up to 15 processes
▫️ a proper Unix filesystem
▫️ SD card support, used for both the filesystem and swap space
▫️ serial console on UART0
▫️ the full set of Fuzix core binaries work — fsck, Bourne shell, the standard Unix tools, a vi clone, etc, plus some simple games
More information...
#projects #raspberry #fuzix #software #operating_systems #pico
13 723
🎛 Insanely Small Development Board: T402 Atto
It’s an extremely simple circuit and hardly something that hasn’t been done before, but the value here is in the tricky soldering to make it rather than its novelty.
The ATtiny402 and three passive SMD components are fitted on the smallest possible sliver of prototyping board to contain them, and the female headers and set of programming pins contribute far more to the volume of the device than the board itself. He also tried a side-on design with two smaller slivers of board before settling on the more conventional layout.
The demonstration of the system in action seen in the video: the break is a magnetic flux detector, dwarfed by the 40-pin DIP Z80 it is sitting on.
More information...
#boards #arduino #experiments
