Electrical and electronics engineering
Electrical engineering Paid promotion @Engineeringupdatess @electricalandelectronics09
Больше📈 Аналитический обзор Telegram-канала Electrical and electronics engineering
Канал Electrical and electronics engineering (@electricalandelectronics09) языкового сегмента Английский является активным участником. Сейчас сообщество объединяет 20 006 подписчиков, занимая 6 751 место в категории Технологии и приложения и 22 175 место в регионе Индия.
📊 Показатели аудитории и динамика
С момента создания невідомо проект демонстрирует стремительный рост, собрав аудиторию из 20 006 подписчиков.
Согласно последним данным от 10 июня, 2026, канал показывает стабильную активность. За последние 30 дней изменение числа участников составило 265, а за последние 24 часа — 9, при этом общий охват остаётся высоким.
- Статус верификации: Не верифицирован
- Уровень вовлечённости (ER): Средний показатель вовлечённости аудитории составляет 25.60%. В первые 24 часа после публикации контент обычно набирает 5.60% реакций от общего числа подписчиков.
- Охват публикаций: В среднем каждый пост получает 5 120 просмотров. В течение первых суток публикация набирает 1 121 просмотров.
- Реакции и взаимодействия: Аудитория активно поддерживает контент: среднее количество реакций на один пост — 13.
- Тематические интересы: Контент сосредоточен на ключевых темах, таких как current, transistor, circuit, mosfet, collector.
📝 Описание и контентная политика
Автор описывает ресурс как площадку для выражения субъективного мнения:
“Electrical engineering
Paid promotion @Engineeringupdatess
@electricalandelectronics09”
Благодаря высокой частоте обновлений (последние данные получены 11 июня, 2026) канал поддерживает актуальность и высокий уровень охвата публикаций. Аналитика показывает, что аудитория активно взаимодействует с контентом, что делает его важной точкой влияния в категории Технологии и приложения.
Загрузка данных...
| Дата | Привлечение подписчиков | Упоминания | Каналы | |
| 11 июня | +5 | |||
| 10 июня | +10 | |||
| 09 июня | +10 | |||
| 08 июня | +11 | |||
| 07 июня | +8 | |||
| 06 июня | +10 | |||
| 05 июня | +6 | |||
| 04 июня | +10 | |||
| 03 июня | +21 | |||
| 02 июня | +24 | |||
| 01 июня | +2 |
| 2 | Нет текста... | 5 218 |
| 3 | Нет текста... | 8 087 |
| 4 | Нет текста... | 8 192 |
| 5 | Нет текста... | 7 681 |
| 6 | Нет текста... | 0 |
| 7 | Нет текста... | 0 |
| 8 | Controlling DC motor speed using voltage directly is inefficient, so this circuit uses Pulse Width Modulation (PWM) to do it more effectively. A 555 timer generates a square wave where the ON time and OFF time can be adjusted using the variable resistor (VR1). When the pulse is narrow, the motor receives power for a shorter time, resulting in lower average voltage and slower speed. When the pulse is wide, the motor gets power for longer duration, increasing the average voltage and making it spin faster. The diodes around the potentiometer help control the charge and discharge paths separately, allowing smooth duty cycle adjustment. The output from the 555 timer drives a power transistor (2N3055), which acts like a switch to supply current to the motor. A diode across the motor protects the circuit from voltage spikes generated when the motor turns off. This method provides efficient speed control with minimal power loss.
#ElectronicsEducation #ElectronicsRD #PWM #DCMotor #555Timer
Like share 👍👍😍✨✨ | 0 |
| 9 | Нет текста... | 0 |
| 10 | This circuit shows how an Arduino controls an RGB LED using three output pins. An RGB LED contains three internal LEDs—Red, Green, and Blue—combined in one package. In this diagram, it is a common cathode type, meaning all the negative terminals are connected together and tied to ground.
Each color pin (R, G, B) is connected to a separate Arduino digital/PWM pin through a 220Ω resistor (R1, R2, R3). These resistors limit current and protect both the LED and the Arduino.
When the Arduino sends a HIGH signal to any pin, current flows through the resistor and the corresponding LED color turns ON. By using PWM (pins marked with ~), the brightness of each color can be adjusted. By mixing different brightness levels of Red, Green, and Blue, a wide range of colors can be produced.
For example:
Red + Green = Yellow
Red + Blue = Magenta
Green + Blue = Cyan
All three = White
This is the basic principle behind color mixing in displays and lighting systems.
#ElectronicsEducation #ElectronicsRD #Arduino #EmbeddedSystems | 0 |
| 11 | A DC power supply converts AC (alternating current) into stable DC (direct current) that electronic circuits can use. This process happens in three main stages: rectification, filtering, and regulation.
First, the AC input (for example, 120V, 60 Hz) enters the rectifier circuit. Here, a bridge rectifier made of four diodes (D1–D4) converts the sinusoidal AC waveform into pulsating DC. Instead of going positive and negative, the output now stays on one side of the axis, but it still has ripples.
Next, the smoothing circuit reduces these ripples.
Finally,
the regulator circuit provides a stable and fixed DC output. An IC like the LM78xx series maintains a constant voltage even if the input fluctuates or the load changes. Capacitors C3 and C4 improve stability and reduce noise at the input and output of the regulator.
The final output (Vout) is clean, steady DC voltage suitable for powering electronic devices, with the negative terminal connected to ground.
#Electronics #PowerSupply #Rectifier #VoltageRegulator | 0 |
| 12 | Нет текста... | 0 |
| 13 | Нет текста... | 0 |
| 14 | Нет текста... | 0 |
| 15 | Нет текста... | 0 |
Уже доступно! Исследование Telegram 2025 — ключевые инсайты года 
