اکنون در دسترس! پژوهش تلگرام ۲۰۲۵ — مهمترین بینشهای سال 
DIGITAL ELECTRONICS PLC
رفتن به کانال در Telegram
Contact 0914839754 @R0bel 0950044950 Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.
نمایش بیشتر📈 تحلیل کانال تلگرام DIGITAL ELECTRONICS PLC
کانال DIGITAL ELECTRONICS PLC (@digitalelectronics_tech) در بخش زبانی انگلیسی بازیگری فعال است. در حال حاضر جامعه شامل 37 901 مشترک است و جایگاه 3 619 را در دسته فناوری و برنامهها و رتبه 877 را در منطقه أثيوبيا دارد.
📊 شاخصهای مخاطب و پویایی
از زمان ایجاد در невідомо، پروژه رشد سریعی داشته و 37 901 مشترک جذب کرده است.
بر اساس آخرین دادهها در تاریخ 09 ژوئن, 2026، کانال فعالیت پایداری دارد. در ۳۰ روز گذشته تغییر اعضا برابر -1 534 و در ۲۴ ساعت گذشته برابر -76 بوده و همچنان دسترسی گستردهای حفظ شده است.
- وضعیت تأیید: تأیید نشده
- نرخ تعامل (ER): میانگین تعامل مخاطب 3.15% است و در ۲۴ ساعت نخست پس از انتشار، محتوا معمولاً 0.82% واکنش نسبت به کل مشترکان کسب میکند.
- دسترسی پستها: هر پست به طور میانگین 1 193 بازدید دریافت میکند. در اولین روز معمولاً 312 بازدید جمعآوری میشود.
- واکنشها و تعامل: مخاطبان بهطور فعال حمایت میکنند؛ میانگین واکنش به هر پست 2 است.
- علایق موضوعی: محتوا بر موضوعات کلیدی مانند ህንፃ፡, መንፈሳዊ, ስላሴ, ቅድስት, ኣድራሻችን፡ تمرکز دارد.
📝 توضیح و سیاست محتوایی
نویسنده این فضا را محل بیان دیدگاههای شخصی توصیف میکند:
“Contact 0914839754 @R0bel
0950044950
Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.”
به لطف بهروزرسانیهای پرتکرار (آخرین داده در تاریخ 10 ژوئن, 2026)، کانال همواره بهروز و دارای دسترسی بالاست. تحلیلها نشان میدهد مخاطبان بهطور فعال با محتوا تعامل دارند و آن را به نقطه اثرگذاری مهم در دسته فناوری و برنامهها تبدیل کردهاند.
37 901
مشترکین
-7624 ساعت
-3547 روز
-1 53430 روز
آرشیو پست ها
37 872
+2
♦️SFM-20B Active Buzzer (3–24V DC)
✨Type: Active piezoelectric buzzer (built-in oscillator)
✨Operating Voltage: 3V – 24V DC
✨Rated Voltage: 12V DC
✨Sound Level: ~85–95 dB
✨Frequency: ~3.3 kHz (±500 Hz)
✨Current Consumption: ~10–12 mA
✨Size: ≈23 mm × 12 mm
✨Output: Continuous tone when powered
✨Material: ABS plastic housing
✨Application: Alarms, Arduino projects, warning systems
📌 price 400
37 872
+2
♦️Plasma Nozzle
✨Type: Plasma cutting torch nozzle
✨Material: Copper (often silver/chrome plated for durability)
✨Function: Constricts and directs the plasma arc for precise cutting
✨Orifice Size: Varies (e.g., 0.8–1.5 mm depending on current rating)
✨Current Rating: Typically 20A–200A (depends on model)
✨Compatibility: Designed for specific plasma torch models
✨Cooling: Air or water-cooled systems
✨Application: Used in CNC and manual plasma cutting machines
📌price 8500
37 872
+2
♦️SW-520D Tilt Sensor Module
✨Voltage: 3.3V – 5V DC
✨Output: Digital (HIGH/LOW)
✨Sensor: SW-520D ball tilt switch
✨IC: LM393 comparator
✨Angle Range: ~10°–45°
✨Pins: VCC, GND, DO
✨Feature: Adjustable sensitivity (potentiometer)
✨Use: Tilt detection, alarms, robotics
📌price 780
37 872
+2
♦️V-Groove Router Bits
✨Type: V-shaped cutting router bit
✨Material: Carbide tipped / Solid carbide
✨Angle Option 90°
✨Cutting Diameter: 18 mm
✨Cutting Direction: Right-hand
✨Application: Engraving, chamfering, lettering, sign making, decorative cuts
✨Compatible Machines: CNC routers, handheld routers
✨Suitable Materials: Wood, MDF, plywood, plastics, soft metals
📌price 2800
37 872
+2
♦️Carbide End Mill 12mm
✨Diameter: 12 mm
✨Material: Solid Tungsten Carbide
✨Flute Count: 4 flutes (common)
✨Cutting Length (LOC): ~30 mm (≈2.5×D typical)
✨Overall Length (OAL): ~75–100 mm
✨Shank Diameter: 12 mm
✨Helix Angle: 35°–45°
✨End Type: Flat end (standard)
✨Cutting Direction: Right-hand
✨Application: Milling, slotting, profiling, finishing
✨Suitable Materials: Steel, stainless steel, aluminum
📌price 8000
37 872
♦️Long Flex Sensor (4.5")
✨Type: Resistive flex (bend) sensor
✨Length: ~4.5 inch (≈112 mm)
✨Thickness: ~0.5 mm (thin flexible strip)
✨Operating Principle: Variable resistor ✨(resistance increases when bent)
✨Flat Resistance: ~10kΩ – 30kΩ (typical)
✨Bent Resistance: up to ~100kΩ – 200kΩ (depends on bend angle)
✨Bend Range: 0° to ~180°
✨Output: Analog (via voltage divider circuit)
✨Pins: 2 (no polarity)
📌price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/
37 872
♦️Long Flex Sensor (4.5")
✨Type: Resistive flex (bend) sensor
✨Length: ~4.5 inch (≈112 mm)
✨Thickness: ~0.5 mm (thin flexible strip)
✨Operating Principle: Variable resistor ✨(resistance increases when bent)
✨Flat Resistance: ~10kΩ – 30kΩ (typical)
✨Bent Resistance: up to ~100kΩ – 200kΩ (depends on bend angle)
✨Bend Range: 0° to ~180°
✨Output: Analog (via voltage divider circuit)
✨Pins: 2 (no polarity)
📌price
37 872
+3
♦️2.4" TFT LCD Display Module (Arduino Uno)
✨Screen Size: 2.4 inch
✨Resolution: 320 × 240 pixels
✨Display Type: TFT LCD
✨Driver IC: ILI9341 (most common)
✨Color Depth: 65K–262K colors
✨Interface:
8-bit parallel (shield type)
or SPI (module type)
✨Operating Voltage: 3.3V / 5V compatible
✨Touch Support: Resistive touch (optional)
✨Backlight: White LED
37 872
+2
♦️Potentiometer
✨Type: Variable resistor (rotary or linear)
✨Resistance Range: Typically 1kΩ – 1MΩ
✨Power Rating: ~0.1W – 1W (depends on model)
✨Tolerance: ±10% to ±20%
✨Taper: Linear (B) or Logarithmic (A)
✨Rotation Angle: ~270° (rotary type)
✨Terminals: 3 pins (two ends + wiper)
✨Material: Carbon film / cermet / wirewound
✨Operating Voltage: Low voltage (depends on power rating)
📌price 200
37 872
+2
♦️3D Printer 128×64 Smart LCD Controller
✨Display: 128×64 graphic LCD (dot matrix, ~3–3.2 inch)
✨Interface: Rotary encoder with push button for menu navigation
✨Storage: Built-in SD card slot for offline printing (G-code files)
✨Compatibility: RAMPS 1.4 / RepRap boards, supported by Marlin firmware
✨Connection: Uses “smart adapter” with ribbon cables (plug & play, firmware config needed)
✨Functions:
✨Start/stop prints without PC
✨Axis movement & calibration control
✨Parameter adjustment via encoder
✨Power Supply: 5V (from controller board)
✨Size: Compact module (~93 × 87 mm typical
📌price
37 872
🚀 An error has been detected in the ETH/USDT pair on valyx.io.
The rate is overvalued, we're already pumping volumes and locking in profits 💸
We've already made a fortune 🔥
The scheme is simple:
buy ETH on any exchange → transfer to valyx.io → sell at a higher price → lock in profits → repeat ♻️
Whoever doesn't sleep, earns 😈
🚀 تم اكتشاف خطأ في زوج ETH/USDT على منصة valyx.io.
السعر مبالغ فيه، ونحن نضخ كميات كبيرة ونحقق أرباحًا طائلة 💸
لقد حققنا ثروة بالفعل 🔥
الخطة بسيطة:
اشترِ ETH من أي منصة تداول ← حوّل إلى valyx.io ← بِع بسعر أعلى ← حَصِّل الأرباح ← كرِّر العملية ♻️
من لا ينام، يربح 😈
37 872
🚀 An error has been detected in the ETH/USDT pair on valyx.io.
The rate is overvalued, we're already pumping volumes and locking in profits 💸
We've already made a fortune 🔥
The scheme is simple:
buy ETH on any exchange → transfer to valyx.io → sell at a higher price → lock in profits → repeat ♻️
Whoever doesn't sleep, earns 😈
🚀 تم اكتشاف خطأ في زوج ETH/USDT على منصة valyx.io.
السعر مبالغ فيه، ونحن نضخ كميات كبيرة ونحقق أرباحًا طائلة 💸
لقد حققنا ثروة بالفعل 🔥
الخطة بسيطة:
اشترِ ETH من أي منصة تداول ← حوّل إلى valyx.io ← بِع بسعر أعلى ← حَصِّل الأرباح ← كرِّر العملية ♻️
من لا ينام، يربح 😈
37 872
♦️SW-420 Sensor Module
✨Operating Voltage: 3.3V – 5V DC
✨Operating Current: ~15 mA
✨Output Type: Digital output (HIGH/LOW)
✨Sensor Type: Normally closed vibration switch
✨Sensitivity: Adjustable via onboard potentiometer
✨Comparator IC: LM393 onboard
✨Indicator: Power LED and output LED
✨Dimensions: ~3.2 cm × 1.4 cm
✨Interface Pins: VCC, GND, DO (Digital Output)
📌price 700
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/
37 872
♦️SW-420 Sensor Module
✨Operating Voltage: 3.3V – 5V DC
✨Operating Current: ~15 mA
✨Output Type: Digital output (HIGH/LOW)
✨Sensor Type: Normally closed vibration switch
✨Sensitivity: Adjustable via onboard potentiometer
✨Comparator IC: LM393 onboard
✨Indicator: Power LED and output LED
✨Dimensions: ~3.2 cm × 1.4 cm
✨Interface Pins: VCC, GND, DO (Digital Output)
📌price 700
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/
37 872
+2
♦️SW-420 Sensor Module
Operating Voltage: 3.3V – 5V DC
Operating Current: ~15 mA
Output Type: Digital output (HIGH/LOW)
Sensor Type: Normally closed vibration switch
Sensitivity: Adjustable via onboard potentiometer
Comparator IC: LM393 onboard
Indicator: Power LED and output LED
Dimensions: ~3.2 cm × 1.4 cm
Interface Pins: VCC, GND, DO (Digital Output)
37 872
+3
♦️Electromagnetic Solenoid Door Lock
✨Operating Voltage: 6V / 12V DC (common: 12V)
✨Current: ~0.5A – 1A (active state)
✨Power Consumption: ~6W – 12W
✨Mode: Normally Closed (NC) or Normally Open (NO)
✨Stroke Length: ~8 – 12 mm
✨Holding Force: ~1 – 5 kg
✨Response Time: <1 second
✨Material: Metal body (steel/aluminum)
✨Mounting: Screw mounting holes
✨Weight: ~100 – 300 g
📌price
37 872
♦️DC Micro Metal Gear Motor (N20)
✨Rated Voltage: 3V – 12V DC
✨Speed: ~30 RPM – 1400 RPM (depends on gear ratio)
✨Torque: ~1.5 – 2 kg·cm (rated), up to ~10–16 kg·cm (stall)
✨Current: ~70 mA (rated), up to ~1 A (stall)
✨Gearbox: Metal gears (high durability)
✨Shaft: 3 mm diameter, D-shaped, ~10 mm length
✨Size: ~34 × 12 × 10 mm
✨Weight: ~10 g
📌price 500
37 872
🚀 An error has been detected in the ETH/USDT pair on valyx.io.
The rate is overvalued, we're already pumping volumes and locking in profits 💸
We've already made a fortune 🔥
The scheme is simple:
buy ETH on any exchange → transfer to valyx.io → sell at a higher price → lock in profits → repeat ♻️
Whoever doesn't sleep, earns 😈
🚀 تم اكتشاف خطأ في زوج ETH/USDT على منصة valyx.io.
السعر مبالغ فيه، ونحن نضخ كميات كبيرة ونحقق أرباحًا طائلة 💸
لقد حققنا ثروة بالفعل 🔥
الخطة بسيطة:
اشترِ ETH من أي منصة تداول ← حوّل إلى valyx.io ← بِع بسعر أعلى ← حَصِّل الأرباح ← كرِّر العملية ♻️
من لا ينام، يربح 😈
