现已上线！2025 年 Telegram 研究 — 年度关键洞察 
DIGITAL ELECTRONICS PLC
前往频道在 Telegram
Contact 0914839754 @R0bel 0950044950 Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.
显示更多📈 Telegram 频道 DIGITAL ELECTRONICS PLC 的分析概览
频道 DIGITAL ELECTRONICS PLC (@digitalelectronics_tech) 英语 语言赛道中的 是活跃参与者。目前社区聚集了 37 824 名订阅者，在 技术与应用 类别中位列第 3 621，并在 埃塞俄比亚 地区排名第 876 位。
📊 受众指标与增长动态
自 невідомо 创建以来，项目保持高速增长，吸引了 37 824 名订阅者。
根据 11 六月, 2026 的最新数据，频道保持稳定运转。过去 30 天订阅人数变化为 -1 531，过去 24 小时变化为 -77，整体触达仍然可观。
- 认证状态： 未认证
- 互动率 (ER)： 平均受众互动率为 2.29%。内容发布后 24 小时内通常能获得 0.80% 的反应，占订阅者总量。
- 帖子覆盖： 每篇帖子平均可获得 866 次浏览，首日通常累积 304 次浏览。
- 互动与反馈： 受众积极参与，单帖平均反应数为 2。
- 主题关注点： 内容集中在 ህንፃ፡, መንፈሳዊ, ስላሴ, ቅድስት, ኣድራሻችን፡ 等核心主题上。
📝 描述与内容策略
作者将该频道定位为表达主观观点的平台：
“Contact 0914839754 @R0bel
0950044950
Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.”
凭借高频更新（最新数据采集于 12 六月, 2026），频道始终保持新鲜度与高覆盖。分析显示受众积极互动，使其成为 技术与应用 类别中的关键影响点。
37 824
订阅者
-7724 小时
-3597 天
-1 53130 天
帖子存档
37 824
+2
♦️SFM-20B Active Buzzer (3–24V DC)
✨Type: Active piezoelectric buzzer (built-in oscillator)
✨Operating Voltage: 3V – 24V DC
✨Rated Voltage: 12V DC
✨Sound Level: ~85–95 dB
✨Frequency: ~3.3 kHz (±500 Hz)
✨Current Consumption: ~10–12 mA
✨Size: ≈23 mm × 12 mm
✨Output: Continuous tone when powered
✨Material: ABS plastic housing
✨Application: Alarms, Arduino projects, warning systems
📌 price 400
37 824
+2
♦️Plasma Nozzle
✨Type: Plasma cutting torch nozzle
✨Material: Copper (often silver/chrome plated for durability)
✨Function: Constricts and directs the plasma arc for precise cutting
✨Orifice Size: Varies (e.g., 0.8–1.5 mm depending on current rating)
✨Current Rating: Typically 20A–200A (depends on model)
✨Compatibility: Designed for specific plasma torch models
✨Cooling: Air or water-cooled systems
✨Application: Used in CNC and manual plasma cutting machines
📌price 8500
37 824
+2
♦️SW-520D Tilt Sensor Module
✨Voltage: 3.3V – 5V DC
✨Output: Digital (HIGH/LOW)
✨Sensor: SW-520D ball tilt switch
✨IC: LM393 comparator
✨Angle Range: ~10°–45°
✨Pins: VCC, GND, DO
✨Feature: Adjustable sensitivity (potentiometer)
✨Use: Tilt detection, alarms, robotics
📌price 780
37 824
+2
♦️V-Groove Router Bits
✨Type: V-shaped cutting router bit
✨Material: Carbide tipped / Solid carbide
✨Angle Option 90°
✨Cutting Diameter: 18 mm
✨Cutting Direction: Right-hand
✨Application: Engraving, chamfering, lettering, sign making, decorative cuts
✨Compatible Machines: CNC routers, handheld routers
✨Suitable Materials: Wood, MDF, plywood, plastics, soft metals
📌price 2800
37 824
+2
♦️Carbide End Mill 12mm
✨Diameter: 12 mm
✨Material: Solid Tungsten Carbide
✨Flute Count: 4 flutes (common)
✨Cutting Length (LOC): ~30 mm (≈2.5×D typical)
✨Overall Length (OAL): ~75–100 mm
✨Shank Diameter: 12 mm
✨Helix Angle: 35°–45°
✨End Type: Flat end (standard)
✨Cutting Direction: Right-hand
✨Application: Milling, slotting, profiling, finishing
✨Suitable Materials: Steel, stainless steel, aluminum
📌price 8000
37 824
♦️Long Flex Sensor (4.5")
✨Type: Resistive flex (bend) sensor
✨Length: ~4.5 inch (≈112 mm)
✨Thickness: ~0.5 mm (thin flexible strip)
✨Operating Principle: Variable resistor ✨(resistance increases when bent)
✨Flat Resistance: ~10kΩ – 30kΩ (typical)
✨Bent Resistance: up to ~100kΩ – 200kΩ (depends on bend angle)
✨Bend Range: 0° to ~180°
✨Output: Analog (via voltage divider circuit)
✨Pins: 2 (no polarity)
📌price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/
37 824
♦️Long Flex Sensor (4.5")
✨Type: Resistive flex (bend) sensor
✨Length: ~4.5 inch (≈112 mm)
✨Thickness: ~0.5 mm (thin flexible strip)
✨Operating Principle: Variable resistor ✨(resistance increases when bent)
✨Flat Resistance: ~10kΩ – 30kΩ (typical)
✨Bent Resistance: up to ~100kΩ – 200kΩ (depends on bend angle)
✨Bend Range: 0° to ~180°
✨Output: Analog (via voltage divider circuit)
✨Pins: 2 (no polarity)
📌price
37 824
+3
♦️2.4" TFT LCD Display Module (Arduino Uno)
✨Screen Size: 2.4 inch
✨Resolution: 320 × 240 pixels
✨Display Type: TFT LCD
✨Driver IC: ILI9341 (most common)
✨Color Depth: 65K–262K colors
✨Interface:
8-bit parallel (shield type)
or SPI (module type)
✨Operating Voltage: 3.3V / 5V compatible
✨Touch Support: Resistive touch (optional)
✨Backlight: White LED
37 824
+2
♦️Potentiometer
✨Type: Variable resistor (rotary or linear)
✨Resistance Range: Typically 1kΩ – 1MΩ
✨Power Rating: ~0.1W – 1W (depends on model)
✨Tolerance: ±10% to ±20%
✨Taper: Linear (B) or Logarithmic (A)
✨Rotation Angle: ~270° (rotary type)
✨Terminals: 3 pins (two ends + wiper)
✨Material: Carbon film / cermet / wirewound
✨Operating Voltage: Low voltage (depends on power rating)
📌price 200
37 824
+2
♦️3D Printer 128×64 Smart LCD Controller
✨Display: 128×64 graphic LCD (dot matrix, ~3–3.2 inch)
✨Interface: Rotary encoder with push button for menu navigation
✨Storage: Built-in SD card slot for offline printing (G-code files)
✨Compatibility: RAMPS 1.4 / RepRap boards, supported by Marlin firmware
✨Connection: Uses “smart adapter” with ribbon cables (plug & play, firmware config needed)
✨Functions:
✨Start/stop prints without PC
✨Axis movement & calibration control
✨Parameter adjustment via encoder
✨Power Supply: 5V (from controller board)
✨Size: Compact module (~93 × 87 mm typical
📌price
37 824
🚀 An error has been detected in the ETH/USDT pair on valyx.io.
The rate is overvalued, we're already pumping volumes and locking in profits 💸
We've already made a fortune 🔥
The scheme is simple:
buy ETH on any exchange → transfer to valyx.io → sell at a higher price → lock in profits → repeat ♻️
Whoever doesn't sleep, earns 😈
🚀 تم اكتشاف خطأ في زوج ETH/USDT على منصة valyx.io.
السعر مبالغ فيه، ونحن نضخ كميات كبيرة ونحقق أرباحًا طائلة 💸
لقد حققنا ثروة بالفعل 🔥
الخطة بسيطة:
اشترِ ETH من أي منصة تداول ← حوّل إلى valyx.io ← بِع بسعر أعلى ← حَصِّل الأرباح ← كرِّر العملية ♻️
من لا ينام، يربح 😈
37 824
🚀 An error has been detected in the ETH/USDT pair on valyx.io.
The rate is overvalued, we're already pumping volumes and locking in profits 💸
We've already made a fortune 🔥
The scheme is simple:
buy ETH on any exchange → transfer to valyx.io → sell at a higher price → lock in profits → repeat ♻️
Whoever doesn't sleep, earns 😈
🚀 تم اكتشاف خطأ في زوج ETH/USDT على منصة valyx.io.
السعر مبالغ فيه، ونحن نضخ كميات كبيرة ونحقق أرباحًا طائلة 💸
لقد حققنا ثروة بالفعل 🔥
الخطة بسيطة:
اشترِ ETH من أي منصة تداول ← حوّل إلى valyx.io ← بِع بسعر أعلى ← حَصِّل الأرباح ← كرِّر العملية ♻️
من لا ينام، يربح 😈
37 824
♦️SW-420 Sensor Module
✨Operating Voltage: 3.3V – 5V DC
✨Operating Current: ~15 mA
✨Output Type: Digital output (HIGH/LOW)
✨Sensor Type: Normally closed vibration switch
✨Sensitivity: Adjustable via onboard potentiometer
✨Comparator IC: LM393 onboard
✨Indicator: Power LED and output LED
✨Dimensions: ~3.2 cm × 1.4 cm
✨Interface Pins: VCC, GND, DO (Digital Output)
📌price 700
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/
37 824
♦️SW-420 Sensor Module
✨Operating Voltage: 3.3V – 5V DC
✨Operating Current: ~15 mA
✨Output Type: Digital output (HIGH/LOW)
✨Sensor Type: Normally closed vibration switch
✨Sensitivity: Adjustable via onboard potentiometer
✨Comparator IC: LM393 onboard
✨Indicator: Power LED and output LED
✨Dimensions: ~3.2 cm × 1.4 cm
✨Interface Pins: VCC, GND, DO (Digital Output)
📌price 700
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/
37 824
+2
♦️SW-420 Sensor Module
Operating Voltage: 3.3V – 5V DC
Operating Current: ~15 mA
Output Type: Digital output (HIGH/LOW)
Sensor Type: Normally closed vibration switch
Sensitivity: Adjustable via onboard potentiometer
Comparator IC: LM393 onboard
Indicator: Power LED and output LED
Dimensions: ~3.2 cm × 1.4 cm
Interface Pins: VCC, GND, DO (Digital Output)
37 824
+3
♦️Electromagnetic Solenoid Door Lock
✨Operating Voltage: 6V / 12V DC (common: 12V)
✨Current: ~0.5A – 1A (active state)
✨Power Consumption: ~6W – 12W
✨Mode: Normally Closed (NC) or Normally Open (NO)
✨Stroke Length: ~8 – 12 mm
✨Holding Force: ~1 – 5 kg
✨Response Time: <1 second
✨Material: Metal body (steel/aluminum)
✨Mounting: Screw mounting holes
✨Weight: ~100 – 300 g
📌price
37 824
♦️DC Micro Metal Gear Motor (N20)
✨Rated Voltage: 3V – 12V DC
✨Speed: ~30 RPM – 1400 RPM (depends on gear ratio)
✨Torque: ~1.5 – 2 kg·cm (rated), up to ~10–16 kg·cm (stall)
✨Current: ~70 mA (rated), up to ~1 A (stall)
✨Gearbox: Metal gears (high durability)
✨Shaft: 3 mm diameter, D-shaped, ~10 mm length
✨Size: ~34 × 12 × 10 mm
✨Weight: ~10 g
📌price 500
37 824
🚀 An error has been detected in the ETH/USDT pair on valyx.io.
The rate is overvalued, we're already pumping volumes and locking in profits 💸
We've already made a fortune 🔥
The scheme is simple:
buy ETH on any exchange → transfer to valyx.io → sell at a higher price → lock in profits → repeat ♻️
Whoever doesn't sleep, earns 😈
🚀 تم اكتشاف خطأ في زوج ETH/USDT على منصة valyx.io.
السعر مبالغ فيه، ونحن نضخ كميات كبيرة ونحقق أرباحًا طائلة 💸
لقد حققنا ثروة بالفعل 🔥
الخطة بسيطة:
اشترِ ETH من أي منصة تداول ← حوّل إلى valyx.io ← بِع بسعر أعلى ← حَصِّل الأرباح ← كرِّر العملية ♻️
من لا ينام، يربح 😈
