Tapbit Announcement

💡 Did You Know ?

An “overbought” RSI doesn’t automatically mean the price is about to fall. 📊

The Relative Strength Index (RSI) measures the speed and strength of recent price movements. An RSI above 70 is commonly considered overbought, but during a strong uptrend, an asset can stay overbought for quite some time.

That’s why traders usually avoid using RSI alone to predict a reversal. 👀

They may also look at : • Market structure • Support & resistance • Trading volume • Price action confirmation

One indicator can give you information, but context gives it meaning. 🧠

#DidYouKnow #TapbitTips #RSI #CryptoEducation

📘 Technical Lexicon | Glossary of the Day

Trailing Stop 📈🔐

A Trailing Stop is a type of stop order that automatically follows the price when the market moves in your favor.

➤ How does it work ?

Instead of staying at one fixed level, the stop adjusts as the price moves further into profit. For Example 👇 If you set a trailing stop 5% below the market price and the asset keeps rising, the stop will move higher with it.

But always remember :

If the market reverses enough to reach the trailing stop, the position may be closed automatically.

It can help protect profits while still allowing a winning trade room to continue. 🧠

#TapbitEducation #CryptoGlossary #TrailingStop #LearnCrypto

💡 Did You Know ?

Cross Margin and Isolated Margin manage risk differently in Futures trading. 📊

With Isolated Margin, only the margin assigned to a specific position is at risk. With Cross Margin, available margin in your Futures account may be shared across positions to help maintain them.

➤ Why does this matter ?

Your margin mode can directly affect how much of your balance is exposed when the market moves against you. ⚠️ Understanding the difference helps you choose the level of risk exposure that fits your strategy. 🧠 #DidYouKnow #TapbitTips #FuturesTrading #TAPBIT

📘 Technical Lexicon | Glossary of the Day

Position Size 📊

Position Size refers to the amount of capital a trader allocates to a specific trade.

➤ Why does it matter ?

Your position size determines how much your account can gain or lose when the market moves. For Example 👇 Two traders can enter the same trade with the same stop-loss, but the trader using a larger position will face a bigger potential loss if the setup fails.

➤ But always remember :

Good risk management isn’t only about where you place your stop-loss, it’s also about how much capital you expose to the trade. 🧠 Stay tuned for more crypto terms and trading insights 🚀 #TapbitEducation #CryptoGlossary #PositionSize #LearnCrypto

💡 Tapbit & Crypto Facts You Shouldn’t Miss

A quick market bite to keep you updated on the latest moves across crypto and global markets. 📊

— Crypto traded higher as of 02:00 UTC, with ETH and SOL outperforming BTC. — The Nasdaq 100 and gold closed Tuesday lower, while WTI oil and the VIX moved higher. — Middle East supply risks continued to support oil prices despite the possibility of additional Russian diesel supply. — Lower Treasury yields and a softer U.S. dollar helped ease some pressure across financial markets. — In U.S. earnings, Goldman Sachs beat EPS expectations, while JPMorgan Chase came in below consensus.

Swipe through the images below for the full Tapbit Insights 👇

Trade with confidence on Tapbit 💛

💡 Did You Know ?

In Futures trading, the Mark Price and the Last Price are not always the same. 📊

The Last Price is the price at which the most recent trade was executed, while the Mark Price is a reference price designed to better reflect the asset’s fair market value.

Why does this matter ? 👇

On many Futures platforms, the Mark Price is used when calculating unrealized PNL and determining liquidation conditions. This helps reduce the impact of sudden short-term price spikes on leveraged positions.

Understanding which price matters can help you manage Futures positions more effectively. 🧠

#DidYouKnow #TapbitTips #FuturesTrading #CryptoEducation

📘 Technical Lexicon | Glossary of the Day

Maker vs Taker 📊

A Maker places an order that adds liquidity to the Order Book, while a Taker executes against an existing order and removes liquidity.

For Example 👇

If you place a Limit Order that doesn’t execute immediately and waits in the Order Book, you are generally acting as a Maker. If your order immediately matches an existing order, you are acting as a Taker.

➤ Why does it matter ?

Understanding Maker and Taker orders can help you better understand how trades are executed and how liquidity works in the market. 🧠 Stay tuned for more crypto terms and trading insights 🚀 #TapbitEducation #CryptoGlossary #MakerTaker #LearnCrypto

💡 Did You Know ?

A Stop-Loss doesn’t always guarantee the exact price at which your position will close. ⚠️

When the market moves very quickly, your order may be executed at the next available price instead of the exact stop price you selected. This can happen especially during : • Sudden volatility • Major market news • Rapid price movements • Lower-liquidity conditions

That’s why position sizing is just as important as setting a stop-loss. 🧠📊

A stop-loss helps manage risk, but good risk management starts before the trade is even opened. #DidYouKnow #TapbitTips #RiskManagement #CryptoEducation

📘 Technical Lexicon | Glossary of the Day

Bid-Ask Spread 📊

The Bid-Ask Spread is the difference between the highest price a buyer is willing to pay and the lowest price a seller is willing to accept.

For Example 👇

If the highest bid for BTC is $100,000 and the lowest ask is $100,020, the spread is $20. ➤ A smaller spread often means the market has stronger liquidity, while a wider spread can make trading more expensive.

But always remember :

The spread can change quickly during periods of high volatility or low liquidity. 👀 Understanding it can help you better evaluate your entry and execution price. 🧠 #TapbitEducation #CryptoGlossary #BidAskSpread #LearnCrypto

📢 Tapbit Funding Fee Adjustment Notice

Tapbit has adjusted the funding fee charging interval for the following contract :

🔹 Contract : ONDO-SWAP 🔹 Funding Fee Interval : 4 hour

📌 Kindly adjust your trading strategies accordingly.

📖 Find more details here : https://tapbitcex.zendesk.com/hc/en-us/articles/17809833371919

💡 Did You Know ?

The Order Book gives you a real-time view of current buy and sell orders in the market. 📊

It is mainly divided into two sides : • Bids → prices buyers are willing to pay • Asks → prices sellers are willing to accept

When there are large concentrations of orders at certain prices, they can sometimes highlight areas where buying or selling interest is stronger.

But remember, orders can be added or removed at any time, so the Order Book should not be used alone to predict price movements.

Think of it as another tool for understanding what’s happening behind the chart. 🧠

#DidYouKnow #TapbitTips #OrderBook #CryptoEducation

📘 Technical Lexicon | Glossary of the Day

Mark Price 📊

The Mark Price is a reference price used in Futures trading to calculate unrealized PNL and help determine liquidation.

➤ Why is it important?

Unlike the Last Price, which reflects the most recent trade, the Mark Price is designed to better represent the asset’s fair market value. This helps reduce the risk of unnecessary liquidations caused by short-term price spikes. 👀

For Example 👇

If the Last Price suddenly moves sharply for a few seconds, your position may still be evaluated using the Mark Price rather than that temporary market fluctuation.

Understanding Mark Price can help you better monitor your Futures positions and liquidation risk. 😉👌

#TapbitEducation #CryptoGlossary #MarkPrice #LearnCrypto

Tapbit Earn Carnival : Limited-Time 50% Yield Boost 🔥

To show our appreciation for your continued support of Tapbit Earn :👇

Tapbit is launching the Vol. 7 of the "Earn Carnival" ; a limited-time Yield Boost campaign ! 🥳

This round, we are highlighting the high-performance public chain ecosystem with a special SUI Yield Boost Event.

📝 How to join the event : 👇

1. Log in to your Tapbit account and enter the Earn page 2. Select the SII Flexible Earn product and click Subscribe 3. Enter your subscription amount (Min. 1 SUI) and confirm.

📍The +50% APY boost applies only to new SUI Flexible Earn subscriptions made during the campaign period and early redemption will result in the forfeiture of the boosted yield.

🗓 Period : September 23 – 26, 2026, 10:00 (UTC+0)

Rewards will be credited to spot accounts within 7 business days post-campaign. 🫡

Read more details here : 👇

https://tapbitcex.zendesk.com/hc/en-us/articles/17726651991311

Tapbit Android App Download & Installation Guide 📄

To protect your account and assets, please use official download channels only. 💁‍♂️

🟡 Method 1 : Download via Google Play

1. Open the Tapbit download page on Google Play, or search for Tapbit on Google Play. 2. Confirm the app name and Tapbit icon, then tap Install. 3. Once the installation is complete, tap Open to log in or register a Tapbit account.

🟡 Method 2 : Download the APK from the Tapbit Website

1. Visit the official Tapbit website using your mobile browser. 2. Go to the App download section and select Android Download, or scan the official QR code. 3. Once the APK file has been downloaded, open it and tap Install as prompted.

👉 After installation, open the App to log in or register an account.

📍 If your device blocks installation from unknown sources, first confirm that the APK was downloaded from tapbit.com.

Find the security tips on the link below : 🔐 https://tapbitcex.zendesk.com/hc/en-us/articles/17479794021135

⚠️ Tapbit Security Reminder ⚠️ Dear Tapbit Community, We've noticed that @CryptoTapBit_Bot is being used by malicious individuals to impersonate Tapbit.

Please stay vigilant and remember : 👇

- Tapbit admins will NEVER message you first in private. - Tapbit does not have an official Telegram Mini App. - If you need assistance, contact an admin through the official group. - Always verify the identity of anyone claiming to be a Tapbit admin. Never share your password, private keys, or other sensitive information with anyone claiming to represent Tapbit. 🧏

🚨 If someone contacts you first claiming to be from Tapbit, do not interact with them or share any personal information.

Your security is our top priority. Stay safe and vigilant ! 💛

📢 Tapbit To Support the USDT Contract Swap on Optimism Network

To ensure a best trading experience for all users :

Tapbit will support the USDT contract swap on the Optimism network. ⚠️ Deposits & withdrawals of token(s) will be suspended from approximately 04:10 (UTC) on September 21 2026.

📃 Find more details here :

https://tapbitcex.zendesk.com/hc/en-us/articles/17695322041999

📘 Technical Lexicon | Glossary of the Day

Open Interest (OI) 📊

Open Interest refers to the total number of Futures contracts that are currently open and have not yet been closed or settled.

➤ Why does it matter?

When Open Interest increases, it can indicate that more traders are entering the market and new positions are being created. When it decreases, traders may be closing their positions.

For Example 👇

If BTC Futures Open Interest rises while the price is also moving strongly, it can show increasing market participation. But remember 👀

Open Interest alone does not tell you whether traders are bullish or bearish. It should be combined with price action and other indicators.

Understanding OI can help you better evaluate activity in the Futures market. 😉👌 #TapbitEducation #CryptoGlossary #OpenInterest #TAPBIT

💡 Tapbit & Crypto Facts You Shouldn't Miss

A quick market bite to keep you updated on what’s moving crypto and traditional markets today. 🔥

- Crypto markets came under pressure after the U.S. Senate failed to advance the CLARITY Act, renewing regulatory uncertainty. - Tighter oil-supply expectations pushed crude prices and Treasury yields higher. - Long liquidations and ETF outflows reflected broader risk reduction across crypto markets. - Technology stocks and gold also faced pressure as markets looked toward the Fed. 📊 What does this mean for the market? Check the slides below for the full Tapbit Insights breakdown. 👇 Trade with confidence on Tapbit 💛

💡 Did You Know ?

A crypto with a very low price isn’t automatically “cheap.” 👀💰

The price of one token only tells part of the story. To better understand a cryptocurrency’s overall valuation, traders also look at its market capitalization.

Market Cap = Token Price × Circulating Supply 📊

For example, a token priced at $0.10 with billions of tokens circulating could have a larger market cap than another token trading at $100.

So before judging a crypto by its price alone, always look at the bigger picture. 🧠

#DidYouKnow #TapbitTips #TAPBIT

📢 Tapbit Perpetual Contract Listing Announcement ! 🔥

We are pleased to announce that Tapbit has listed the following USDT-M Perpetual Contracts : 🤩

🔸 PONSUSDT 🔸 IRENUSDT 🔸 ASMLUSDT

✅ Users can now trade these contracts on Tapbit Futures.

More details about the assets here : 👇 https://tapbitcex.zendesk.com/hc/en-us/articles/17534523146895