3rd Printing Platoon🇺🇦🫡

🧨 ready to use for…. 🧨 …. Exploding Russians! 🔖 You can see the big bottles filled up with some nice "material which evaporates very quickly“. At this point we can’t show you more details with this specific part. However, it’s also 3D printed within our factory. ⭐️ Do you want a greater output of these parts? Consider a donation 😉 each 5€ will be used for one big bottle. ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🚨 Ordered —> delivered 🚨 This vehicle holds the daily consumption of a single group of drone pilots on a good day.

Guess how many bottles are in the car!

⚡️ With the current discounts we get from our dealer, the production cost is about 2,50€ each. Our current income is more or less at a rate of 100€ per day. This equals 40 small bottles per day. 🔼Our goal is to increase our daily output to 100 units! 👍 Help us achieve this goal by spreading the word and attracting new supporters! ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

📣 Update! 📣 We Are Running at full capacity right now. Unfortunately, despite all the benefits for Ukraine, this also has a major drawback. 🔼The benefit: Our Ukrainian military allies receive the maximum possible number of bottles they urgently need. We are currently able to meet 50% of their needs, which is extremely good. 🔽The downside: We’re using up much more material and electricity than expected. Our stockpiles are running out very quickly, and we don’t have enough funds to restock them. ⚠️ The solution: As field representatives, we need to convince others that Ukraine needs even more help right now, because right now Ukraine has the chance to effectively push the Russians back! (Look into the arguments we have given you in another post before) ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

AGAIN IT IS TIME!! As we sometimes do, this month we are again giving back something to those who do donate to our work in the 3rd Printing Platoon and make it possible for us to continue. This time we are offering you a huge Unmanned Aerial Forces flag what will be given to someone who donates a €150 or more during this month. Also we are giving a chevron of the 131st Separate Reconnaissance Battalion to someone who donates €20 or more during this month. Winners will be drawn at the beginning of next month. As usual, these are NOT eBay crap but items donated by the AFU. So, now it is time for YOU to donate so that we can keep on supporting for example the mighty 59th brigade. Talk is cheap, filament not very expensive either but needed for printing. 😉 Again big thanks to everyone who helps, donates, makes our job easier in any way!!🫡❤️ ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project!  And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

📣 What is your opinion? 📣 Many people ask why Ukraine still needs military support when Russia repeatedly speaks about negotiations and peace talks. Some discussions bring up some weird arguments. But why is the enemy asking for negotiations and the war still continues? 💡 Well, the answer is simple: negotiations only work when both sides have an incentive to compromise. 📌 At the moment, Russia continues to pursue its maximal objectives while presenting itself as open to negotiations. As long as the Kremlin believes that military pressure can still produce gains, there is no real reason for Moscow to make meaningful concessions. It’s more or less a delay tactic. 📌 History shows that diplomacy is most effective when it is backed by leverage. Negotiations conducted from a position of weakness rarely lead to a stable and lasting peace. They often result in one side imposing its demands on the other. ⚠️ This is why military support for Ukraine is extremely important. Its purpose is not to prevent diplomacy. Its purpose is to create the conditions under which diplomacy can succeed. 🔴 If aggression is met with hesitation, the Kremlin learns that continuing the war is more beneficial than compromise. Every delayed response reinforces the belief that time is working in Russia's favor. 📌 Supporting Ukraine is not only about defending the country. It is about demonstrating that aggression does not lead to rewards and that international borders cannot be changed by force without consequences. 📌 Military support and diplomacy are not opposites. Effective military support is what can make meaningful diplomacy possible. 🚨 We from the 3rd Printing Platoon believe in the strength of Ukraine and that the big Goliath is rather a small David. There is a chance of winning the war completely and getting back all lost territory by simply destroying the moral, the equipment and each single invader (with our bottles) ✏️ What is your opinion? Leave a comment below and share this post with others to discuss this topic. You can also check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🇺🇦 special colours! 🇺🇦 It’s the end of the month and we would like to share some numbers with you: 💱 Donations received in May: 2897,26 € 🏦 Balance: -4220,76 € 📊 Bottles produced: 2324 ⚡ Energy consumed: 560 kWh (+ 250 kWh solar power) 📦 Boxes packed: 13 ☠️ Orcs eliminated: ~ 500 ——————————————- 👍 Be a part of this project and secure our production! donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🫦 Great work! 🫦 Have you ever seen the work of the new group from our famous 59th assault brigade? It’s called „Signum“ it’s a group of specialised drone pilots who are hunting down invaders no matter where they are. ⚠️ While such videos are more action like, don’t forget that the same group is also using our ammunition! ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

ℹ️Subtitles Update!ℹ️ Thank you for the English subtitles by Ukraine Journal's Kelly Hudson 🙏 📌 Some of you have asked to add some subtitles. We deeply apologise for having them not added to the first video. Yes, of course, most of you don’t speak Ukrainian. Now you know what they talk about. 📌 For those using Telegram’s auto-translation, the video demonstrates our work. We 3D print drone parts and so-called „bottles“ - empty shells which then are filled up and used by the military. There is no other organisation between your donation and the military, aside from our logistics team. 🤫 All of the boxes you see in this video are filled up with parts and were printed by our factory. Basically, you directly see your money in the back of this car. The soldier taking this video is deeply grateful for this great work, and they thank you directly. Or more specifically, the donors from Telegram and Bluesky. ✏️ If you have any questions, please leave a comment below. 👍 we are fully based on donations. Everything goes straight into this project. Our donation page is linked here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

👀 This is your money! 👀 Have you seen that little piece of paper? It’s proof that everything comes straight from us! A whole car packed with awesome gifts. Do you speak Ukrainian? They are very grateful for our support and extend their sincere thanks to all our donors. 🔴 Our friends in Ukraine need about 100 to 150 bottles every single day, depending on the weather. When you add it all up, that monthly consumption hits around 3,000 to 4,000 bottles. 📌 By the way, thanks to some sweet discounts, each of those units costs about 2.50€ to produce, including shipping to Ukraine. Here’s the cool part: by donating just 100€, you secure the production of 40 units! If you add the hit rate of 25%, you can clearly say that with a 100€ donation, you can stop at least 10 invaders! If you then add the lethality rate of 50%, 5 of them will never return to the battlefield again. That’s not a bad investment, is it? 📌 Don’t have cash but still want to help? No problem at all! Try talking to friends, colleagues, or even strangers at Ukraine demonstrations to convince them to donate to our project. Just share the PayPal link below! ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🏭 Parts over parts 🤖 We are still in production of other needed parts. In this case we are producing some spare parts for special equipment.

Requested: 5000 Produced: 2352 Total costs: ~750€

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! Donate through our PayPal page down below: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🚨 Just 50m away! 🚨 This was an attack on a veterinary clinic in Ukraine. The attack took place near Kiev, about 50m away from a small 3D printing farm. The Russians have clearly committed war crimes! Not a single animal survived the attack. This is proof that Russia must be stopped! Help us and donate to the 3rd Printing Platoon and help us to print as much as we can to fight the invaders! ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! Donate through our PayPal page down below: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

We should not forget the most important things!! This is what we originally wanted to do: To help Ukraine to get rid of the Ruzzian maggots. And that is what we shall do,as long as it is needed. The 59th Separate Assault Brigade held the city of Pokrovsk over 2 years,and our help has played a key role in it. We want to encourage everyone to donate, to do your part in something important for all of us!👍🏻 Thank you to every person who has donated,also big thanks to those channels who support our work, together we WILL win!!🧌💥☠️ Torchline -Thank you!🤝 Intel Slava Ukraini -Thank you!🤝 Ukraine Journal -Thank you!🤝 Ukraine News Channel -Thank you!🤝 Also last but definetely not least: Supernova+, Thank you!!🫡🤝 ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project!  And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🤫 3D printed Ammunition 🤫 -> Why it is 3D printed? • It’s cost effective • It has an integrated design • It’s decentralised 👀 If you watch closely, you can see our design in some boxes. Due to the constant evaluation of shapes and designs and of course the internal structures, the ammunition can’t be produced by injection moulding. That’s why there is a network of thousands of households printing for Ukraine. 🔖However, mostly there are 1-2 private printers operated by volunteers who buy the material, pay the energy bills and the shipping costs. 🔖 We on the other hand have a print farm which is using your donated money to do the work for you! We do all the logistics, ordering material, running the printers and pay for electricity and maintenance.✔️ ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! Donate through our PayPal page down below: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🤫 Inside Ukraine’s secret network of 3D printing farms building bombs  🔖 Thank you to the Australian press which wrote this amazing article about the network full of 3D printing Short summary:

A network of volunteers across Europe are 3D printing drone parts for the Ukrainian military. In spare rooms and backyard sheds, 3D printers run around the clock to produce the parts. The equipment helps fill supply gaps when supplies through official channels dry up.

The full article And we also have our own website now! 3rd Printing Platoon (link) Thanks to one of our members who was building a website for us. ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! Donate through our PayPal page down below: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🤫 Efficient like the AFU 🤫 In the last posting we asked you what you think was shown. They are called bottles! Each box we pack contain around 200 of those. They fit perfectly inside. 7 in a row meets exactly the with of the box. ❓ Do you know how many we have produced in just 2 weeks? Have a guess! Answer: 1274 🙏 This is only possible because of the strong community in our back! And if you are already a supporter, then you can see how your donation looks like before shipping to Ukraine. 🔖 Do you want to see how the are used? Follow our channel to find out more! The more people donate the more bottles can be used by the Armed forces of Ukraine. 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

‼️ What’s that ⁉️ Our supporters from the very first beginning will immediately recognise what this is. Leave a comment below and unlock more content by donating to our PayPal campaign! 👍 Be a part of this project! Donate through our PayPal page down below: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🙏Thank you for your support! 🙏 We just want to inform you that we have secured the announced discount. As you can see, we have also received additional discounts. This is the first time we are releasing some invoices to give an insight into what we have done with your latest donations. 🔖 Just yesterday, we received ~1000€ in donations. We can't thank you more! However, we know that you all are an extremely strong community. Ukraine is extremely grateful to you and will receive the donations in the form of 3D printed parts or as you would say it: bottles 😉. We've also ordered a small colorful extra. It will be released soon when the delivery arrives. ✏️ If you have any questions, please leave a comment below. 3D printing for Ukraine is a constant job that is carried out every day and requires maintenance. Therefore, donations continue to be important. 👍 Be a part of this project! And donate here: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

🛍 Time to order big! 🛍 We’ve got a chance to secure a substantial 15% discount ahead. 🔖 Our daily consumption amounts to an average of about 5-7 kg of material per day, which totals around 200 kg per month. To save money, we must maximise our discount opportunities. The sale on May 1st presents an ideal opportunity to purchase the necessary material at a reduced cost. 📎 In other words, a €50 donation is equivalent to €57.50 in value and a €10 donation is equivalent to €11.50. We’ll order the materials based on the donations received. 👍 please use this link for donations: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 👍 Thank you very much for every donor to be a part of this project. Let’s 🛑 together! Slava 🇺🇦

👀Another inside view…👀 ℹ️ A while ago we showed you a worn out build plate. This time you can see a worn out extruder. This is the part of the printer which is responsible for the extrusion. The pump for the filament so to say. ℹ️ This specific part saw over 150km of wires which was going through the gears. The same as going for a marathon 6 times! Now, it’s time for a replacement. It’s our daily business to replace several parts from time to time. ✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link). 👍 Be a part of this project! Donate through our PayPal page down below: 📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4 Let’s 🛑 together! Slava 🇺🇦

Oh wow... Many orcs are pissed because they have lost someone to our products... This is... Flattering.😂