مختبرات طبيه تلخيصات / اسئله / ملازم

ركزو على اول ثنين 🗿🤝

جمعتلكم المتطلبات لكل مستوى بصفحه وحده على الاغلب راح يجي (اجاهم السنه الفاتت)

هذا كتاب النيزك كامل يفيدكم بالعطله لليريد يطلع اكثر على المجال يعني 🗿🤝

حاولو تحلونها بعد ما تكملون الماده + اطلعو على النمط والصيغة لكل سؤال راح تفيدكم هم بالقرايه وتخليك تعرف على شنو تركز 🗿🤝

اسئلة الفاينل للسنة الفاتت

وهاي كلشي خلص للسلامة من ناحية التلخيص واسئلة تختبر بيها نفسك 🗿🤝 وبحال اكو شي يحتاج توضيح @AMDART1

كلشي يخص امتحان السلامه 1-تلخيص شامل للماده https://t.me/analysis_med/1103 2-ملزمة شامله مادة الامتحان ملخصه https://t.me/analysis_med/1123 3-لكجر الاول pdf ملون + مترجم https://t.me/analysis_med/1130?single 4-لكجر ثاني pdf ملون + مترجم https://t.me/analysis_med/1128?single 5-لكجر ثالث pdf ملون https://t.me/analysis_med/1129?single 6-اسئله MCQ +T/F بالمحاضره الاولى https://t.me/analysis_med/1124 7-اسئلهMCQ + T/F بالمحاضره الثانيه https://t.me/analysis_med/1125 8-اسئله T/F+ MCQ بالمحاضره الثالثه https://t.me/analysis_med/1126 9-اسئله MCQ + T/F بالمحاضره الرابعه https://t.me/analysis_med/1127 10-توضيح بخصوص الاسئله والصيغه https://t.me/analysis_med/1131

أسئلة MCQ تخص لكجر 4 Q1/Which of the following is NOT a route of chemical exposure? A. Inhalation B. Absorption C. Radiating D. Injection Q2/Which type of chemical hazard causes visible and irreversible changes to the composition of materials due to direct contact?** A. Irritants B. Sensitizers C. Corrosives D. Carcinogens Q3/Which of the following chemicals is classified as a carcinogen? A. Sodium hydroxide B. Benzene C. Hydrogen peroxide D. Methanol Q4/Handling which type of chemical hazard may cause genetic changes to a cell's DNA and RNA? A. Flammable B. Reactive C. Mutagens D. Sensitizers Q5/Which of the following chemicals is an example of a flammable substance? A. Acetone B. Chromic acid C. Cadmium D. Nickel chloride Q6/Which chemical hazard is most likely to cause an allergic reaction after repeated exposure over time?** A. Carcinogens B. Sensitizers C. Corrosives D. Mutagens Q7/Inhalation is the most common route of exposure when harmful gases are present in the atmosphere. What does this statement describe?** A. Corrosive hazard B. Respiratory hazard C. Inhalation exposure D. Injection exposure Q8/Which chemical is an example of a reactive substance that can cause an explosion when mixed with other substances? A. Methanol B. Formaldehyde C. Benzoyl peroxide D. Chlorine Q9/Which of the following symptoms can be caused by irritant chemicals? A. Genetic mutations B. Redness and rashes C. Cancer development D. Chemical burns Q10/Which type of waste includes used needles and syringes? A. Infectious waste B. Pathological waste C. Sharps waste D. Chemical waste اسئله(T/F) تخص لكجر 4 Q1/Chemical hazards are only present in liquid form in the workplace. True / False Q2/Inhalation is the most common route of exposure when harmful gases are present in the atmosphere.(T/F) Q3/Corrosive chemicals can cause both localized reactions at the point of contact and systemic chemical exposure.(T/F) Q4/Irritants can cause long-lasting health impacts and can sometimes be fatal.(T/F) Q5/Sensitizers cause immediate allergic reactions in all individuals upon first exposure.(T/F) Q6/Carcinogens are cancer-causing substances that may only show their effects many years after exposure.(T/F) Q7/Mutagens can cause genetic changes that may result in malfunctioning of organs.(T/F) Q8/Reactive chemicals are safe to handle as long as they are not mixed with other substances.(T/F) Q9/Methanol and acetone are examples of flammable chemicals.(T/F) Q10/Chemical waste includes heavy metals in devices and solvents in laboratory reagents.(T/F)

أسئلة MCQ تخص المحاضره الثالثه Q1/Which of the following is NOT considered a biological hazard? A. Bacteria B. Viruses C. Flammable chemicals D. Animal droppings Q2/What is the main purpose of biosafety levels in laboratories?** A. To classify the severity of chemical hazards B. To ensure the safe working environment of laboratory personnel and the environment C. To categorize physical hazards D. To define the funding requirements for laboratory research Q3/Which of the following is a control measure for biological hazards?** A. Personal Protective Equipment (PPE) B. Using flammable materials C. Conducting public surveys D. Increasing lab temperature Q4/What specific practice is required in a Biosafety Level 3 (BSL-3) laboratory?** A. Mouth pipetting B. Restricted entry at all times C. No handwashing D. Use of personal mobile phones Q5/In a BSL-4 laboratory, which of the following practices must be followed? A. Minimal use of PPE B. Decontamination of materials before exiting the lab C. Eating and drinking allowed D. No need for a full body suit Q6/How can biological hazards enter the body through absorption? A. Inhalation of aerosols B. Through broken skin such as cuts or rashes C. Swallowing contaminated food D. Injecting medication safely Q7/Which practice is NOT allowed in a BSL-1 laboratory? A. Mechanical pipetting B. Regular handwashing C. Eating, drinking, and smoking D. Safe sharps handling اسئلة T/F تخص المحاضره الثالثه Q1/Biological hazards include only bacteria and viruses.(T/F) Q2/Inhalation is a common way for biohazards to enter the body.(T/F) Q3/Engineering controls for biological hazards do not include local exhaust ventilation systems.(T/F) Q4/Biosafety Level 1 (BSL-1) applies to laboratory settings in which personnel work with high-risk microbes.(T/F) Q5/Ingestion of biohazards can occur from not washing hands before eating or drinking.(T/F) Q6/Biosafety Level 2 (BSL-2) laboratories do not require hand washing sinks.(T/F) Q7/A full body garment with respiratory protection is required in Biosafety Level 3 (BSL-3) laboratories.(T/F) Q8/Administrative controls for biological hazards include training and personal hygiene practices(T/F) Q9/Biosafety Level 4 (BSL-4) laboratories require decontamination of materials before exiting the lab.(T/F) Q10/Splashes to the eyes, nose, or mouth are examples of biohazards entering the body through injection.(T/F)

اسئله T/F بالمحاضره الثانيه اختبر بيها نفسك Q1/PPE is any safety equipment worn by employees to minimize exposure to hazards in the workplace. (T/F) Q2/ PPE does not create a barrier between the hazard and worker contact. (T/F) Q3/Safety glasses protect eyes from chemical splashes and other substances.(T/F) Q4/ Disposable masks are not needed in labs with dangerous gases/particles in the air. (T/F) Q5/Gloves can protect against corrosive/toxic chemicals, biological contaminants, sharps, and extreme temperatures. (T/F) Q6/ After removing gloves, there is no need to wash/decontaminate hands. (T/F) Q7/ Lab coats provide complete protection against liquid chemical splashes. (T/F) Q8/Cotton lab coats are preferable to polyester/rayon blend coats. (T/F) Q9/ Gowns provide similar coverage as lab coats with solid fronts and elasticized cuffs. (T/F) Q10/Head covers act as a barrier against contamination in unclean environments (T/F) اسئله MCQ بالمحاضره الثانيه اختبر بيها نفسك Q1/What is the main purpose of PPE? a) To minimize exposure to hazards in the workplace b) For stylish appearance in the lab c) To restrict movement and vision d) None of the above Q2/Which type of PPE protects eyes from chemical splashes? a) Face shields b) Safety glasses c) Hard hats d) Both a and b Q3/If a chemical gets into someone's eyes in the lab, what should they do first? a) Rinse eyes at the nearest eyewash station b) Look for PPE c) Exit the lab immediately d) Call the safety manager Q4/Which mask is recommended for protection against airborne hazards? a) Surgical mask b) N95 mask c) Cloth mask d) Both a and b Q5/What should be done after removing contaminated gloves? a) Wash and decontaminate hands b) Wear the same gloves again c) Nothing, it's safe to proceed d) Take off other PPE Q6/Which glove type is puncture and abrasion resistant? a) Latex gloves b) Vinyl gloves c) Nitrile gloves d) Cotton gloves Q7/What is the benefit of a cotton lab coat over polyester/rayon blends? a) More economical b) Resists liquid penetration better c) Preferable for biological work d) None of the above Q8/ Head covers act as a barrier against: a) Heat exposure b) Contamination c) Radiation d) Sharp objects Q9/ Which is NOT a recommended practice regarding glove use? a) Decontaminate hands before putting on gloves b) Discard gloves after single use c) Wear contaminated gloves outside the lab d) Dispose gloves in proper waste container

اسئله T/F بالمحاضره الاولى اختبرو بيها نفسكم Q1/Eating and drinking are allowed in a chemistry laboratory.(T/F) Q2/Labels and equipment instructions must be read carefully before use.(T/F Q3/Mouth suction can be used to fill a pipette.(T/F) Q4/ It is acceptable to leave inflammable materials lying around after use (T/F) Q5/ Water should never be poured into concentrated acids. (T/F) Q6/Used chemicals can be poured back into the stock container.(T/F) Q7/Electrical panels should be easily accessible and unobstructed.(T/F) Q8/ High voltage equipment can be modified in any way.(T/F) Q9/Personal protective equipment like lab coats, goggles and closed shoes must be worn at all times in the lab.(T/F) Q10/Reporting any accident or injury, no matter how minor, to the instructor is required.(T/F) اسئله MCQ اختبر بيها نفسك (المحاضره الاولى فقط) Q1Which of the following personal protective equipment must be worn at all times in the lab? a) Lab coat only b) Eye protection only c) Closed shoes only d) All of the above Q2/What should you do if a chemical gets into your eye? a) Rinse with water immediately b) Rinse with saline solution c) Do nothing and wait for it to clear d) Wipe with a cloth Q3/Eating, drinking and smoking are permitted in the chemistry lab. a) True b) False Q4\What should be done after using inflammable materials? a) Leave them on the benchtop b) Return them to designated fireproof cabinet c) Dispose of them in regular waste 4d) No special precaution needed Q5/ When working with hazardous vapors, you should: a) Use a fume hood b) Work in an open area c) Not wear a mask d) Open the windows Q6/If equipment is malfunctioning, you should: a) Continue using it b) Report it immediately c) Try to fix it yourself d) Ask a labmate to use it Q7/Used chemicals should be: a) Poured back into stock bottles b) Disposed of properly in waste containers c) Taken home d) Left in the fume hood Q8/ Water should be added to concentrated acid when diluting. a) True b) False Q9/ To prevent electric shocks, it's best to adjust high voltage equipment with: a) One hand only, other hand away b) Both hands c) While wearing gloves d) No special precaution needed Q10/All electrical equipment in the lab must be: a) Properly grounded b) Kept unplugged when not in use c) Used without grounding if portable d) Grounded only for high voltage items

تعداد كلش مهم + حفظ كل نوع مليار بالميه كدامك

يجيك بشكل تعداد او بشكل عرف فردي فأنت تحفظ كل نقطه ويه المثال مالتها

Q1/Define Chemical hazards Q2/Many organic and inorganic chemicals are------------- Q3/Full safety wear should be provided to any members of the team handling chemicals and provisions to treat any exposure (T/F) Q4/Whats the Routes of Chemical Exposure

تحفظ لكل مستوى و شنو المتطلبات مالته والبروتوكولات مالته🗿🤝

Q1/Define Biosafety Levels Q2/Biosafety Levels ranked from------to------- Q3/Each level has specific controls for containment of biological agents and microbes so whats The controls are recommended based on ? Q4/whats the important role bio safety levels play ? Q5/Enumrate Bopsafety levels