en
Feedback
ATS CLASSES [ MECH , RRB JE/SSC JE]

ATS CLASSES [ MECH , RRB JE/SSC JE]

Open in Telegram

For RRB JE /SSC JE of Mechanical Engineering students.

Show more
India466 364Education193 292
408
Subscribers
+124 hours
+237 days
+20430 days
Posts Archive
ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Edit, Sign and Share PDF files on the go. Download the Acrobat Reader app: https://adobeacrobat.app.link/Mhhs4GmNsxb

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.60 Determine the elevation for 30˚ using 5.00” sine bar. [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.59 What is meant by HVOF in metal coating? [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.58 In a vernier calliper, the main scale reads in mm with a least count of 0.1 mm .10 division on the vernier correspond to 9 divisions of the main scale.Find the least count of the calliper
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.57 __________ is a group of fine holes on the surface of the weld caused by gas entrapment. [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.56 A cutting tool can never have its [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.55 Which of the following materials has nearly zero coefficient of expansion? [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.54 Find the tool life equation, if a tool life of 80 min is obtained at a cutting speed of 30 m/min and 8 min at 60 m/min. [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.53 Corundum is composed of about 85 percent of [RRB JE 2019
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.52 Which of the following gases is NOT used as shielding gas in arc welding? [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.51 The length of the slot weld can be obtained from the ratio of [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.50 How long should a steel component be heat treated before nitriding? [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.49 Grinding is used for [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.48 __________ is fitted on the top of cross slide and is used to support the tool post and the cutting tool. [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.47 The largest diameter of work that can be carried between the centers of a lathe is known as [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.46 _______ consists of a mixture of clay, feldspar, flint and frit in varying proportions.                                                                   [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.45 Lathe bed is made up of [RRB JE 2019]
Anonymous voting

ATS CLASSES [ MECH , RRB JE/SSC JE]
ATS CLASSES [ MECH , RRB JE/SSC JE]
408
Q.44 Which of the following properties is desirable in parts subjected to shock and impact loads? [RRB JE 2019]
Anonymous voting