OnePlus 8/Pro XML Channel

JeusXML 48MP V14 for Arnova 8.1.121 Installation (rooted devices only): - Download and install Arnova’s 8.1 GCam from Celzoazevado - Also download the config and the noise model from this post (you need to download 2 files), and place them on /Sdcard/GCam/Configs8 - If the noise modeller file isn’t in the folder, GCam will display a dark display after loading the config. - Download and install the Camera Unlocker magisk module and select the firmware version your rom is using during the installation process. Changelog - Unified build - The Ultrawide camera is now available on the 8/8T/9R too but will only work for EIS video recording on those devices - Reduced color noise in backlit scenes - OIS stabilization improvements - Audio Zoom is now enabled by default Notes: - 48MP works better in well lit areas (eg: outdoors during the day). The binned resolution (12MP in this case) performs better in low light/hasher conditions. - Processing high resolution frames is resource intensive. You may experience some lag, heat, and higher battery drain. Very long exposures (eg: astrophotography) may fail. - This XML uses EIS video stabilization, similar to the stock camera. Note that EIS is currently available on 1080p and 8K.

JeusXML LMC V86 - Made for LMC R13_Fix2, supports all 8 Series devices and the OnePlus 9R - Based on @ArcideMusic's V5.2 XML for the OP9 Series Instrustions: - Download and install the APK from the link above (Use the Snapcam package for OOS, GoogleCameraEng for all other roms) - Download the XML from this post and place it in Internal Storage\LMC8.4 (load it by double-tapping the black area around the shutter button) Changelog: - Shots are now saved using the Display-P3 color space - Bugfixes: - Fixed a bug where the viewfinder was slightly zoomed in on the main back lens - Fixed a bug that caused the viewfinder to be black when manually switching to Night Sight on the Ultrawide - Fixed broken face detection on the Ultrawide - Fixed a bug that caused the front camera's viewfinder to freeze on Nameless-AOSP - Focus slider changes: - Focus adjustments are now applied automatically - Set the minimum focusing distance value to the minimum one supported on each lens - Adjusted focus values for the presets on Night Sight - The LDR effect should now be more prominent and work across more scenes - Face Retouch is supported - Astro max exposure time increased to 15 seconds (was 10) - Astro is now supported on the UW lens as well - Slight changes to color transform - Improved the accuracy of the red and green color primaries - Improved sharpness on all lenses - Top shot is now supported (set to off by default) Toggles (left to right): - Focus tracking - HDR frames - AWB - Exposure compensation - ISO and exp time sliders - Focus slider Modes: Leica - Vignette effect LDR - Low dynamic range Note: The viewfinder is customizable on LMC. You can disable all extra features in settings if you prefer a cleaner look.

JeusXML 48MP V12.1 Hotfix Changelog: - This is a hotfix update to the 48MP XML for Arnova's 8.1.101, meant to fix crashing in specific roms such as PE+. If already using version 12 of this XML, you needn't upgrade to this one. Notes: - This XML only works on rooted devices using the Camera Unlocker module - Both the config and noise modeller need to be placed on /GCam/Configs8/. If the noise modeller file isn’t in the folder, GCam will display a black screen after loading the config.

JeusXML LMC V73 - Made for LMC R13_Fix2, supports all 8 Series devices and the OnePlus 9R - Based on @ArcideMusic's V5.2 XML for the OP9 Series - This config is now using LMC's AutoCT algorithm which improves white balance indoors and fixes desaturation in low light. Note that Auto-CT does not work in Portrait mode (APK limitation) - Front camera is now upscaled to 16MP using Google's Raisr2020 algorithm. While not true 16MP, it should deliver cleaner and less artificially sharpened images - Shasta now automatically chooses the best Shasta factor for each shot, depending on the scene's contrast. - Switched to Sabre 3 for all lenses, should help reduce image artifacts and color noise in high dynamic range shots - Sabre is now supported on all non-Sony sensors as well, should greatly improve image quality on the Macro sensor (8/8T/9R) or the Photochrome and the Telephoto (8 Pro) - Auto Night Sight is enabled by default, configured to only be used when necessary for a sharper shot. Manually switching to Night Sight should not be necessary and may harm image sharpness in some cases. - Astrophotography is tested and working on the Main lens (Up to 10s exposures) - Manual camera controls are available on this XML Notes: - The Monochrome sensor on the 8T/9R is not supported on LMC yet (Needs an APK side commit) - It is recommended to shoot Portraits in the main camera mode and add blur in Google Photos, the depth map should be applied correctly this way. - Multi Frame Noise Reduction for the viewfinder is no longer supported, as it harms the image's dynamic range on LMC - 8K video is not currently supported on LMC - The magisk module is still recommended and should reduce dependence on auto night sight in low light shots. - This XML is made possible thanks to all the users who have been testing the beta releases for so long, and have helped in making the 8 Pro version too

JeusXML 48MP V12 for Arnova's 8.1.121 - Updated 48MP build for all devices, with less artifacts and more dynamic range - Only works on rooted devices using the Camera Unlocker module - Only the main back lens and the Ultrawide(8 Pro) are supported on this XML - Both the config and noise modeller need to be placed on /GCam/Configs8/. If the noise modeller file isn’t in the folder, GCam will display a black screen after loading the config. - 48MP works better in well lit areas (eg: outdoors during the day). The binned resolution (12MP in this case) performs better in low light/hasher conditions. - Processing high resolution frames is resource intensive. You may experience some lag, heat, and higher battery drain. Very long exposures (eg: astrophotography) may fail. - This XML uses EIS video stabilization, similar to the stock camera. Note that EIS currently only works in 1080p and 8K at 30fps

JeusXML 48MP V12 for Arnova's 8.1.121 - Updated 48MP XML for all devices, with less artifacts and more dynamic range - Only works on rooted devices using the Camera Unlocker module - Only the main back lens and the Ultrawide(8 Pro) are supported on this XML - Both the config and noise modeller need to be placed on /GCam/Configs8/. If the noise modeller file isn’t in the folder, GCam will display a black screen after loading the config. - 48MP works better in well lit areas (eg: outdoors during the day). The binned resolution (12MP in this case) performs better in low light/hasher conditions. - Processing high resolution frames is resource intensive. You may experience some lag, heat, and higher battery drain. Very long exposures (eg: astrophotography) may fail. - This XML uses EIS video stabilization, similar to the stock camera. Note that EIS currently only works in 1080p and 8K at 30fps