1 095
Subscribers
No data24 hours
No data7 days
No data30 days
Posts Archive
1 095
Specification
NXP (Freescale) i.MX6 processor, up to 1.2GHz / 4 cores
NXP microcontroller LPC13xx (Default: LPC1345FHN33)
Soldered down DDR3-1066 (533MHz), up to 4GB
1x 10/100/1000 Mbps Ethernet
1x HDMI Output (up to QXGA 2048×1536)
1x Parallel CSI Camera input or RGB Parallel Display output
1x Differential Camera Input (Compatible with Raspberry Pi) or LVDS display output
1x SATA
1x micro SD
1x PCIE mini slot + micro SIM (can be used for WiFi or Wireless modem)
1x USB OTG Micro
2x USB
1x CAN transceiver
1x Compass + Accelerometer
1x Gyroscope
1x Humidity sensor
1x Temperature sensor
1x Audio (Headphones output, Microphone input)
1x Touchscreen connector (Touchscreen through LPC13xx / Optional 4x Analog input)
1x I2C EEPROM
1x SPI FLASH
1x IR Receiver
1x Arduino type header. Default:
4x Analog input
3x GPIO
1x I2C
1x CAN
1x USB
1x Raspberry PI type header. Default:
2x I2C
2x UART
1x CAN TX/RX
2x SPI
3x GPIO/PWM
1x UART Debug console (FTDI compatible)
8+2 USER LED
Power LED, SD Card LED, USB HUB LED
1x Reset button, 3x User button (e.g. Home, Volume Up, Volume Down)
Size: 70 x 95 mm (2.75 x 3.75 inch)
Input power: 5V DC (through Power Jack or USB micro)
@OPENPCB
