SolidWorks
Open in Telegram
✍️Channel 2: @AddiTech To contact, share, or ask anything: @Ghiasvand_Engineering No adds Since 2019!
Show more5 760
Subscribers
No data24 hours
+97 days
+130 days
Posts Archive
5 760
Educational animation of Bernoulli's principle in fluid mechanics and reference to the important equations of this topic
@Solidworks2019
5 760
An animation of how the car tire packing machine (stretch ring screw) works and showing its mechanism
@Solidworks2019
5 760
برج تصفیه کننده هوای ساخته شده توسط کمپانی هلندی Roosegaard که در واقع یک جاروبرقی برای مکش هوای آلوده بوده و در هر ساعت حدود ۳۰ کیلومتر مکعب هوا را با مصرف ۱ کیلووات انرژی الکتریکی سبز، تصفیه میکند. از این برج در مناطق مختلفی مانند پارکها و یا مکانهایی با آلودگی هوای بالا میتوان استفاده کرد.
@Solidworks2019
5 760
The air purification tower built by the Dutch company Roosegaard, which is actually a vacuum cleaner for sucking polluted air, purifies about 30 cubic kilometers of air every hour by consuming 1 kilowatt of green electrical energy. This tower can be used in different areas such as parks or places with high air pollution
@Solidworks2019
5 760
Explaining the topic of plane stress in simple language and pointing out its applications
@Solidworks2019
5 760
(Machining Design Guidelines )
✅Turning Guidelines
📌Symmetrical Axial Slots
The width of axial slots and keyways on turned parts should be symmetrical about the turn axis. If width of axial slots and keyways is not symmetrical about the turn axis, then the part will face problems while coupling with other turn parts.
❗️It is recommended to design axial slots and keyways such that they are symmetrical about the turn axis. This guideline identifies whether the width of axial slots and keyways is symmetrical about the turn axis or not, a condition which is likely a result of an error during modeling.
@Solidworks2019
5 760
(Machining Design Guidelines )
✅Turning Guidelines
📌Outer Diameter Profile Relief
📋Profile relief on the outer diameter of a turned part helps in smooth turn-machining of part.
📋The turned contour should allow easy tracing with a minimum number of changes of stylus and cutting tool. Grooves with parallel or steep sidewalls are not feasible in one operation.
📋Contours inclined upto an angle of 58° from the axis of the part are feasible for a cutting tool (and stylus). Following image shows feasible contours when they are perpendicular to the axis.
@Solidworks2019
5 760
(Machining Design Guidelines )
✅Turning Guidelines
📌Minimum Internal Corner Radius
It is recommended to avoid sharp internal corners and provide large inside radius so that a tool with large nose radius can enter easily. A tool with large radius is less prone to breakage. A turn-down surface at right angles to an un-machined (cast) surface might lead to burrs. The minimum radius on internal corners of a turned part determines the cutting inserts that can be used.
It is always recommended to use cutting inserts with larger radii.
@Solidworks2019
5 760
(Machining Design Guidelines )
✅Turning Guidelines
📌Blind Hole Relief
Provide tool relief for the bottoms of blind bored holes.
Tool relief at the end of a bored hole will simplify the operation of honing, boring, reaming, and grinding and reduce costs. The minimum amount of relief is expressed as a percent of the diameter of the pre-bored.
It is recommended that relief at the end of bored hole should be greater than or equal to 3% of the diameter of bored hole.
@Solidworks2019
5 760
⚡️⚡️⚡️Exciting News: Blockchain Announcement
We're thrilled to announce that TapSwap will launch on the TON blockchain!
This well-thought-out decision is the best option for delivering the ultimate experience for our ever-growing community.
Stay tuned for more updates and details! Get ready to tap into new possibilities with TON 💎!
