Endi mavjud! Telegram Tadqiqoti 2025 — yilning asosiy insaytlari 
DIGITAL ELECTRONICS PLC
Kanalga Telegram’da o‘tish
Contact 0914839754 @R0bel 0950044950 Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.
Ko'proq ko'rsatish📈 Telegram kanali DIGITAL ELECTRONICS PLC analitikasi
DIGITAL ELECTRONICS PLC (@digitalelectronics_tech) Ingliz til segmentidagi kanali faol ishtirokchi. Hozirda hamjamiyat 37 613 obunachidan iborat bo'lib, Texnologiyalar & Aralashmalar toifasida 3 652-o'rinni va Efiopiya mintaqasida 882-o'rinni egallagan.
📊 Auditoriya ko‘rsatkichlari va dinamika
невідомо sanasidan buyon loyiha tez o‘sib, 37 613 obunachiga ega bo‘ldi.
16 Iyun, 2026 dagi oxirgi ma’lumotlarga ko‘ra kanal barqaror faollikka ega. Oxirgi 30 kunda obunachilar soni -1 447 ga, so‘nggi 24 soatda esa -32 ga o‘zgardi va umumiy qamrov yuqori darajada qolmoqda.
- Tasdiqlash holati: Tasdiqlanmagan
- Jalb etish (ER): Auditoriya o‘rtacha 2.12% darajada jalb etiladi. Nashrdan keyingi dastlabki 24 soatda kontent odatda umumiy obunachilar sonining 0.78% ini tashkil etuvchi reaksiyalarni to‘playdi.
- Post qamrovi: Har bir post o‘rtacha 798 marta ko‘riladi; birinchi sutkada odatda 295 ta ko‘rish yig‘iladi.
- Reaksiyalar va o‘zaro ta’sir: Auditoriya faol: har bir postga o‘rtacha 2 ta reaksiya keladi.
- Tematik yo‘nalishlar: Kontent ህንፃ፡, መንፈሳዊ, ስላሴ, ቅድስት, ኣድራሻችን፡ kabi asosiy mavzularga jamlangan.
📝 Tavsif va kontent siyosati
Muallif resursni shaxsiy fikrni ifoda etish maydoni sifatida ta’riflaydi:
“Contact 0914839754 @R0bel
0950044950
Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.”
Yuqori yangilanish chastotasi (oxirgi ma’lumot 17 Iyun, 2026 da olingan) sababli kanal doimo dolzarb va katta qamrovli bo‘lib qoladi. Analitika auditoriya kontent bilan faol hamkorlik qilishini, uni Texnologiyalar & Aralashmalar toifasidagi muhim ta’sir nuqtasiga aylantirishini ko‘rsatadi.
37 613
Obunachilar
-3224 soatlar
-2917 kunlar
-1 44730 kunlar
Postlar arxiv
37 592
+3
📌BreadBoard
♦️Solderless Plug-in BreadBoard830 tie-Points, 4 Power Rails, 6.5 x 2.2 x 0.3in (165 x 55 x 9mm)
♦️The BB830 has a 630 tie-point IC-circuit area plus four 50 tie-point power rails.
♦️The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows.
♦️The internal contacts are phosphor bronze with a plated nickel finish.
♦️A peelable adhesive tape backing is provided for attaching it to a surface and an optional metal back plate is provided.
♦️BPS BreadBoards are Lead-Free and RoHS Compliant.
37 592
+3
📌5V brushless DC fan
♦️Fan Type: Brushless DC axial cooling fan
♦️Rated Voltage: DC 5 V (compatible with 6 V operation)
♦️Operating Voltage Range: Typically 4.5 V – 6.5 V DC
♦️Rated Current: Between 0.10 A and 0.20 A depending on batch
♦️Power Consumption: Approx. 0.5 W – 1.0 W (5 V × 0.18 A = 0.9 W nominal)
♦️Rated Speed: Around 18 000 – 20 500 RPM (ultra-high-speed micro-fan)
♦️Airflow: 2.5 – 3.0 CFM (≈ 0.07 – 0.09 m³/min)
♦️Bearing Type: High-precision sleeve or hydraulic bearing (varies by batch)
♦️Connector Type: 2-pin JST-XH 2.54 plug (standard micro fan connector)
♦️Weight: ≈ 4.5 grams (lightweight miniature design)
♦️Rotation Direction: Counter-clockwise when viewed from label side
♦️Operating Temperature: –10 °C to +70 °C
♦️Storage Temperature: –40 °C to +80 °C
♦️Typical Applications: Cooling for 3D printers
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+3
📌Female Dc Jack Connector For Neon Light
♦️Connector Size: 5.5 x 2.1mm is the most common size for DC power, but always verify this matches your power supply.
♦️Polarity: You'll need a center-positive male connector to align with the standard female jack.
♦️Voltage: Look for connectors rated for the voltage range of your neon light, typically 1-38V or higher.
♦️Current: The connector should be rated for the maximum current your neon light will draw, often 5A.
♦️Wire Gauge: Ensure the connector can accommodate the wire size of your power cable, such as 16-24 AWG.
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
📌Creality Ender-3 V3 Plus 3D Printer
♦️The Creality Ender-3 V3 Plus is the latest high speed printer from Creality
♦️Build Volume: 300 x 300 x 300mm
♦️Max printing speed: 600mm/s (With Creality Hyper PLA)
♦️Vibration Compensation Sensor: Included
♦️Printing Resolution: 0.1mm
♦️Nozzle diameter: 0.4mm (Standard)
♦️Max nozzle temperature: 300 °C
♦️Max heated bed temperature: 110 °C
♦️Printing Surface: PEI Flexible Build Plate
♦️Auto Bed Levelling mode: Auto levelling
♦️Connection mode: Wifi
♦️Compatible file format: STL, OBJ, 3MF
♦️Slicing Software: Creality Print
♦️Power Input: 200-240V AC, 50/60Hz
♦️Rated Power: 350W
♦️Power loss recovery: Yes
♦️Filament runout sensor: Yes
♦️Compatible Filaments: PLA, ABS, PETG, TPU, PLA-CF, PETG-CF, CR-Carbon, ASA
♦️Filament Diameter: 1.75mm
♦️Nett Weight: 11.5kg
♦️Machine size: 410 x 445 x 577mm
📌Price 195,000
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
🌐https://digitalelectronics.tech/
37 592
+4
📌40 cm ball screw kit
♦️Ball Screw Diameter: 40mm
♦️Total Length: 40 cm (400mm), though this can vary and is often customized
♦️Lead/Pitch: 10mm (e.g., SFU4010 or RM4010), but other leads like 5mm or 20mm may also be available
♦️Nut: Anti-backlash ball nut, often with a deflector system
♦️End Supports: Standard BK/BF30 end supports are included by default
♦️Coupler: A flexible coupler is typically provided to connect the ball screw to a motor
♦️Accuracy Grade: Commonly C7 grade, which indicates a certain level of accuracy
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
🌐https://digitalelectronics.tech/
37 592
+4
📌Mach3 4-axis CNC controller
♦️Number of Axes: 4
♦️Max Step Pulse Frequency: 100 kHz or 200 kHz per axis, depending on the model
♦️Communication: USB or Ethernet
♦️Compatible OS: Windows 7, 8, 10
♦️Power Input: 12-24V or 24V DC, requiring an external power supply
♦️Controller Type: Often a 2-in-1 controller and stepper driver board, or a separate breakout board connected to drivers
♦️Digital Inputs: Typically 4-12 optically isolated inputs for limit switches, E-stop, probes, etc.
♦️Manual Pulse Generator (MPG): Support for connecting an electronic handwheel
♦️Spindle Control: 0-10V analog output or PWM signal
♦️Relay Outputs: Up to 4 optically isolated relay outputs for controlling spindle on/off, coolant, etc.
♦️General Purpose Outputs: Available for various applications
37 592
+3
📌GT5 idler pulley
♦️Material: Aluminum Alloy
♦️Belt Width: 10mm
♦️Outer Diameter: 18mm
♦️Height: 13mm
♦️Inner Diameter (Bore): 5mm
♦️Smooth/Toothless: These pulleys have a smooth surface and no teeth, which is why they are called "idler" pulleys.
♦️Free-spinning: They contain an integrated bearing that allows them to spin freely, which is ideal for routing belts or adding tension without putting extra load on a motor.
37 592
+3
📌CNC Router Neon Light Milling Cutter
♦️8mm
✨Neon Light Strip Milling Cutter
✨Model: 8mm-6D-5.8
✨Shank size 6mm
✨Neon strip size 8mm
✨Cutting depth 5.8mm
✨Neon Light Strip Milling Cutter 8 Flexible Silicone LED slotting Polystyrene Foam Acrylic Slot Engraving Router
Excellent edge-grinding technology.
♦️6mm
✨Neon Light Stripe Milling Cutter
✨Model: 8mm-6D-4.2
✨Shank size 6mm
✨Neon strip size 8mm
✨Cutting depth 4.2mm
✨Neon Light Stripe Milling Cutter 8 Flexible Silicone LED slotting Polystyrene Foam Acrylic Slot Engraving Router
Excellent edge-grinding technology.
37 592
+2
📌MOSFETs
♦️IRF840 MOSFET
✨N-Channel Power MOSFET
✨Continuous Drain Current (ID): 8A
✨Gate threshold voltage (VGS-th) is 10V (limit = ±20V)
✨Drain to Source Breakdown Voltage: 500V
✨Drain Source Resistance (RDS) is 0.85 Ohms
♦️IRFZ44 MOSFET
✨Small signal N-Channel MOSFET
✨Continuous Drain Current (ID) is 49A at 25°C
✨Pulsed Drain Current (ID-peak) is 160A
✨Minimum Gate threshold voltage (VGS-th) is 2V
✨Maximum Gate threshold voltage (VGS-th) is 4V
✨Gate-Source Voltage is (VGS) is ±20V (max)
♦️IRF540N MOSFET
✨IRF540N N-Channel MOSFET
✨Small signal N-Channel MOSFET
✨Continuous Drain Current (ID) is 33A at 25°C
✨Pulsed Drain Current (ID-peak) is 110A
✨Minimum Gate threshold voltage (VGS-th) is 2V
✨Maximum Gate threshold voltage (VGS-th) is 4V
📌Price 85
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
🌐https://digitalelectronics.tech/
37 592
+2
📌Atmega328 Microcontroller
♦️ATMEGA328P is high performance, low power controller from Microchip. ATMEGA328P is an 8-bit microcontroller based on AVR RISC architecture.
♦️It is the most popular of all AVR controllers as it is used in ARDUINO boards.
♦️With program memory of 32 Kbytes ATMEGA328P applications are many.
With various POWER SAVING modes it can work on MOBILE EMBEDDED SYSTEMS.
♦️With Watchdog timer to reset under error it can be used on systems with minimal human interference.
♦️With advanced RISC architecture, the controller executes programs quickly.
Also with in chip temperature sensor the controller can be used at extreme temperatures.
📌Price 650
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
🌐https://digitalelectronics.tech/
37 592
+2
📌MAX7219 – 8-Digit LED Display Driver IC
♦️MAX7219 – 8-Digit LED Display Driver IC
♦️The MAX7219 is an IC designed to control a 8×8 LED MATRIX
♦️Operating voltage range: 4.0 to 5.5V
Recommended operating voltage: 5V
♦️Maximum supply voltage: 6V
♦️Maximum current allowed to draw through each segment pin: 100mA
♦️Maximum current allowed to through each DIGIT ground pin: 500mA
♦️Low power consumption
Data-to-Segment Delay Time: 2.2mSec
♦️Operating temperature: 0°C to 70°C
37 592
📌Custom 3D Printing Service
🚀 Bring your ideas to life! ✨ Our custom 3D printing service turns your designs into reality with precision. From prototypes to unique creations
🧩Transform your vision into tangible objects with our advanced 3D printing solutions. We specialize in custom parts, prototypes, and unique designs, offering quality and speed for makers, designers, and entrepreneurs. Let's build your next great idea together!
♦️Contact 📱09-14-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
🌐https://digitalelectronics.tech/
37 592
+2
📌Led Flexible Neon Light
♦️comes with 6mm and 8mm thickness
♦️12V LED lights
♦️comes with 11 color options
✨Warm
✨Blue
✨Red
✨Green
✨Yellow
✨White
✨Ice Blue
✨Pink
✨Lemon Yellow
✨Orange
✨Purple
📌Price 650 birr per meter
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 592
+2
📌Sim900A GSM/GPRS module
♦️Frequency Bands: EGSM900/DCS1800 ♦️(Dual-band) GPRS: Multi-slot class 10 ♦️(default) or class 8 Control: AT commands (GSM 07.07, 07.05, and SIMCOM enhanced AT commands) Interfaces: UART (TTL) serial, with some versions including an RS232 interface
♦️ Supply Voltage: 3.2V to 4.8V (VBAT pin), with some board variations supporting 4.5V-5V
♦️Antenna: SMA connector with a built-in antenna or an external SMA connector for an antenna
♦️SIM Card: SIM card holder included
♦️Status Indicators: Onboard network status and operating status LEDs
📌Price 2500
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+2
📌Simm800 Communication Module
♦️Frequency bands: GSM 850/900/1800/1900 MHz
♦️GPRS: Class 12 (or Class 10 on some variants)
♦️SMS: Point to point MO and MT, SMS cell broadcast, text and PDU modes
♦️Operating voltage: 3.4V to 4.4V DC (recommended 4V)
♦️Power consumption:
✨Idle mode: ~20mA
✨Sleep mode: < 2.0mA
✨Transmission (peak): Up to 2A
♦️Communication: Serial UART interface (TX/RX)
♦️SIM card: Micro SIM slot
♦️Antenna: Supports both internal (e.g., IPX connector) and external antennas
♦️Audio: Analog audio interface, input for microphone, and output for speaker
♦️Other: GPIO, RTC, ADC
📌Price 1750
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+2
📌HC-05 Bluetooth Module
♦️Bluetooth protocol: Bluetooth Specification v2.0+EDR
♦️Frequency: 2.4GHz ISM band
♦️Modulation: GFSK
♦️Security: Authentication and encryption
♦️Operating voltage: 3.2V to 6V DC
♦️Operating temperature: -20 ~ +75 °C
♦️Dimensions: 27mm x 13mm x 2mm (approximate)
📌HC-06 Bluetooth Module
♦️Bluetooth Protocol: Bluetooth V2.0
♦️Function: Slave-only module
♦️Chipset: CSR BC04
♦️Band: 2.40GHz-2.48GHz, ISM Band
♦️Modulation: Gauss frequency Shift Keying
♦️Receiver Sensitivity: -85dBm
♦️Safety: Authentication and encryption
37 592
+2
📌12864 LCD Control Panel for3D printer
♦️Display: 128 x 64 dots, dot matrix LCD.
♦️Resolution: 128 pixels wide by 64 pixels high.
♦️Controller: Uses an ST7920 or similar IC driver.
♦️Interface: Supports 8-bit parallel and 4-bit serial interfaces, with the 4-bit serial interface being the most common for E3 Printer firmwares.
♦️Hardware:
♦️SD Card Reader: For storing and printing G-code files directly from the device.
♦️Rotary Encoder: For adjusting parameters and selecting files.
♦️Push Button: A general-purpose push button.
♦️Buzzer: A built-in beeper for feedback.
♦️Connectors: Two 10-pin EXP1 and EXP2 connectors for mainboard interface.
37 592
+6
📌Egg Turner Motor
♦️Egg Capacity: How many eggs the turner can hold, which varies greatly by model.
♦️Dimensions: The physical size of the turner (e.g., 17.71\"L x 6.29\"W x 3.14\"H).
♦️Motor Power: The power rating of the motor driving the turning mechanism, usually low-power (e.g., 4W).
♦️Material: Most modern turners are made from durable, food-safe materials like ABS plastic.
♦️Voltage: The operational voltage, commonly 12V DC or AC 230V.
♦️Rotation Mechanism: The turner's trays typically swing at a 45-degree angle to simulate natural turning.
♦️Egg Tray Design: Hollow-style trays are common to ensure air circulation and prevent embryos from settling.
📌Price 6500
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+4
📌XM-18D automatic computer control incubator
♦️Model: XM-18D
♦️Temperature Measurement: 0-99.9°C with ±0.1°C accuracy
♦️Humidity Measurement: 0-99% RH with ±3% RH accuracy
♦️Output Signals: 7 (over-temperature, temperature control, insufficient temperature, egg left turn, egg right turn, humidity control, alarm)
♦️Egg Turning:
✨Cycle: 0-999 minutes (default 90 minutes)
✨Time: 0-999 seconds (default 180 seconds)
✨Maximum Record: 999 times
♦️Ventilation:
✨Cycle: 0-999 minutes (default 120 minutes)
✨Time: 0-999 seconds (default 15 or 30 seconds)
♦️Sensors: Includes temperature and humidity sensors
♦️Working Voltage: AC 160V-240V, 50Hz
♦️Working Environment:
✨Relative Humidity: < 85%
✨Ambient Temperature: -10 to 60°C
