Endi mavjud! Telegram Tadqiqoti 2025 — yilning asosiy insaytlari 
DIGITAL ELECTRONICS PLC
Kanalga Telegram’da o‘tish
Contact 0914839754 @R0bel 0950044950 Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.
Ko'proq ko'rsatish📈 Telegram kanali DIGITAL ELECTRONICS PLC analitikasi
DIGITAL ELECTRONICS PLC (@digitalelectronics_tech) Ingliz til segmentidagi kanali faol ishtirokchi. Hozirda hamjamiyat 37 554 obunachidan iborat bo'lib, Texnologiyalar & Aralashmalar toifasida 3 652-o'rinni va Efiopiya mintaqasida 882-o'rinni egallagan.
📊 Auditoriya ko‘rsatkichlari va dinamika
невідомо sanasidan buyon loyiha tez o‘sib, 37 554 obunachiga ega bo‘ldi.
16 Iyun, 2026 dagi oxirgi ma’lumotlarga ko‘ra kanal barqaror faollikka ega. Oxirgi 30 kunda obunachilar soni -1 447 ga, so‘nggi 24 soatda esa -32 ga o‘zgardi va umumiy qamrov yuqori darajada qolmoqda.
- Tasdiqlash holati: Tasdiqlanmagan
- Jalb etish (ER): Auditoriya o‘rtacha 2.12% darajada jalb etiladi. Nashrdan keyingi dastlabki 24 soatda kontent odatda umumiy obunachilar sonining 0.78% ini tashkil etuvchi reaksiyalarni to‘playdi.
- Post qamrovi: Har bir post o‘rtacha 798 marta ko‘riladi; birinchi sutkada odatda 295 ta ko‘rish yig‘iladi.
- Reaksiyalar va o‘zaro ta’sir: Auditoriya faol: har bir postga o‘rtacha 2 ta reaksiya keladi.
- Tematik yo‘nalishlar: Kontent ህንፃ፡, መንፈሳዊ, ስላሴ, ቅድስት, ኣድራሻችን፡ kabi asosiy mavzularga jamlangan.
📝 Tavsif va kontent siyosati
Muallif resursni shaxsiy fikrni ifoda etish maydoni sifatida ta’riflaydi:
“Contact 0914839754 @R0bel
0950044950
Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.”
Yuqori yangilanish chastotasi (oxirgi ma’lumot 17 Iyun, 2026 da olingan) sababli kanal doimo dolzarb va katta qamrovli bo‘lib qoladi. Analitika auditoriya kontent bilan faol hamkorlik qilishini, uni Texnologiyalar & Aralashmalar toifasidagi muhim ta’sir nuqtasiga aylantirishini ko‘rsatadi.
37 554
Obunachilar
-3224 soatlar
-2917 kunlar
-1 44730 kunlar
Postlar arxiv
37 554
📌Logic Gates IC
♦️Technology: Complementary Metal-Oxide-Semiconductor (CMOS).
♦️Operating Voltage: Typically 3V to 15V, with some variations.
♦️Low Power Consumption: CMOS technology inherently uses very little power, especially when compared to TTL.
♦️High Noise Immunity: CMOS gates have a noise margin that's a percentage of the supply voltage, offering better protection against noise than TTL.
♦️Wide Temperature Range: Many CD4000 devices are specified for operation across a wide temperature range, like -55°C to 125°C.
♦️Variety of Functions: The CD4000 series offers a wide range of logic functions, including basic gates (AND, OR, NOT, NAND, NOR) and more complex functions like flip-flops, counters, and multiplexers.
♦️Pin Compatibility: Some CD4000 devices are pin-compatible with equivalent TTL devices
✨CD4001
✨CD4011
✨CD4013
✨CD4016
✨CD4047
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌600mm Trapezoidal lead screw T8
♦️Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
♦️Length: 600 mm; Pitch: 2mm (Single Start Threads)
♦️Rod Material: Stainless Steel; Nut Material: Brass
♦️Qty: 1pcs Tr8x600mm Rod + 1pcs Brass Nut
♦️Thread Size 8mm
♦️Thread Coverage Partially Threaded
♦️Exterior Finish Stainless Steel
♦️Fastener Material Stainless Steel
♦️Thread Style Right Hand
♦️Item Weight 50 Grams
♦️Set Screw Thread Type Metric Coarse
♦️Fastener Type Fully Threaded
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌Gy-521 MPU-6050 MPU6050 Module 3 Axis Analog Gyro Sensors+ 3 Axis Accelerometer Module
♦️Power supply :3-5v (internal low dropout regulator)
♦️Communication modes: standard IIC communications protocol
♦️Chip built-in 16bit AD converter, 16-bit data output
♦️Gyroscope range: ± 250 500 1000 2000 ° / s
♦️Maximum Supply Voltage 5 Volts (DC)
♦️Measurement Accuracy High
♦️Measuring Range Gyroscope: ± 250, 500, 1000, 2000 °/s; Accelerometer: ± 2, ± 4, ± 8, ± 16g
♦️Mounting Type Flange Mount
♦️Output Type Digital
♦️Specific Uses For Product personal
♦️Upper Temperature Rating 85 Degrees Celsius
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌W1209 Digital Temperature Controller Thermostat Module
♦️W1209 thermostat module has a temperature sensor, keys, LED display, relay and requires DC 12V power supply
♦️Temperature Control Range: -50 ~ 110 C
♦️Resolution at -9.9 to 99.9: 0.1 C
♦️Resolution at all other temperatures: 1 C
♦️Measurement Accuracy: 0.1 C
♦️Control Accuracy: 0.1 C
♦️Refresh Rate: 0.5 Seconds
♦️Input Power (DC): 12V
♦️Measuring Inputs: NTC (10K 0.5%)
♦️Waterproof Sensor: 0.5M
♦️Output: 1 Channel Relay Output,
♦️Capacity: 10A
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌GT2 Timing Pulley
♦️Material: aluminum
♦️Number of teeth: 16
♦️Sprocket diameter: 13 mm
♦️Bore diameter: 5 mm
♦️Height of the wheel: 14,5 mm
♦️Adjustment screw size for pressure: M2
♦️Compatible with GT2 timing belts with a width of 6 mm
♦️High quality material ensures long tooth life and precision of belt operation
37 554
📌GT2 Idler
♦️GT2 Belt Passive Idler Pulley Aluminum Pulley Bore 5mm with bearing
♦️Colour: Sliver
♦️Material: Aluminium Alloy
♦️Bore Size: 5mm
♦️Outside Diameter (OD): 17.7mm
♦️Height: 8.5mm
♦️The idler is a good match for the 20T GT2 timing belt pulley driven by stepper motor
♦️It is a Dual Bearing Aluminum Idler Pulley
♦️Use M5 screws to mount this pulley
Idler Pulley Without Teeth
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌 4 Axis 500KHz CNC Offline Controller DDCSV4.1
♦️Model Number: DDCS V4.1 ; 7 inches TFT screen, resolution ratio: 1024x600 ,17 operation keys
♦️Differential Mode and Double Pulse Mode output signal for optional
♦️Maximum interpolation pulse output frequency is 500Khz/Axis
♦️2-4 Axis linear interpolation, any 2 axis circular interpolation
♦️Feature: ARM9 main control chip,FPGA core algorithm chip;18 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs
♦️The spindle can be configurated as Analog spindle 0-10V and also servo spindle
♦️Power requirements: The Power Supply for IO Port is 24VDC
♦️Power Supply for Controller system is also 24VDC
♦️minimum current is 0.5A, Controller needs both power to work properly
Support G code file
♦️Can transfer the files by Ethernet communication between the computer and DDCS V4.1 controller
📌Price 9500
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌Nema 23 Stepper Motor
High Torque Nema 23 CNC Stepper Motor 114mm/3Nm CNC Mill Lathe Router
Product Description
This is the strongest model for Nema 23 stepper motor, it with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 4.2A, allowing for a holding torque of 3.0Nm(425oz.in).
✨ Electrical Specification:
♦️ Motor Type: Bipolar Stepper
♦️ Step Angle: 1.8 deg.
♦️ Holding Torque: 3.0Nm(425oz.in)
♦️ Rated Current/phase: 4.2A
♦️ Phase Resistance: 0.9ohms
♦️ Inductance: 3.8mH+/-20%(1KHz)
✨ Physical Specification:
♦️ Frame Size: 57 x 57mm
♦️ Body Length: 113mm
♦️ Shaft Diameter: 10mm
♦️ Shaft Length: 24mm
♦️ D-cut Length: 20mm
♦️ Number of Leads: 4
♦️ Lead Length: 400mm
♦️ Weight: 1.8kg
✨ Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Price: 9500 Birr
Contact 📱0914-839754 @R0bel
📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌Pinion Gearbox for NEMA 34
♦️This is the pinion gearbox for a Rack and Pinion setup
♦️This is often used to drive large format CNC machines and plasma cutting machines due to the fact that these rack gears can be joined to form long extended lengths
♦️The other advantage is these rack & pinion drives are very robust in dirty environments and can deliver high accuracy movements.
✨Specifications:
♦️Tooth profile: 1.25 Mod
♦️Pinion gear tooth count: 23 tooth
♦️Material: Aluminium casing with steel gear
♦️Tooth type: Left Hand Helical (To work with right hand helical rack gear)
♦️Designed to work with NEMA 34 motor with 14mm shaft
♦️Gear ratio between motor and pinion gear: 5:1
♦️Includes motor pulley and closed loop timing belt
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌4.5KW Air Cooled Spindle Motor
♦️Power: 4.5KW
♦️Operating Speed:10-18000rpm
♦️Frequency:300Hz
♦️Voltage:220V
♦️Collet:ER32
♦️Bearings:4pcs bearings
♦️Current:14A;Runout off: less than 0.01mm
♦️Aluminum profile body, not easy to deform, anodized surface treatment, shell not affected by time, fast heat dissipation design, with its own cooling fan, good cooling effect, and improved spindle life,
♦️High quality bearings The spindle motor is equipped with 4pcs bearings, which are characterized by high precision, high hardness, rust prevention, durability and long service life.
♦️ER32 standard collet, the collet is quenched with manganese steel, the runout is less than 0.002mm, the accuracy is high, the tool is not easy to break, the stability in the working process is improved, and the dynamic balance technology can effectively reduce the noise in the use process
📌Price
Contact 📱0914-839754 @R0bel
📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌Ball Screw SFU1604 RM1604 Length 400mm Diam 16mm with Ballnut
♦️【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable.
♦️【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation.
♦️【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation.
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
📌HRC55 Ball Nose End Mills 2 Flute
♦️Double-edge design, improves rigidity and surface finish effectively
♦️Cutting edge over the center reduces the cutting resistance.
♦️High capacity of junk slot benefits chip removal and increases machining efficiency
♦️2 flutes design is good for chip removal, easy for vertical feed processing, widely used in slot and hole processing.
♦️Size ;
✨R0.5*2*4*50
✨R1*4*4*50
✨R2*8*4*50
✨R3*12*6*50
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ
37 554
+3
📌HRC45 CNC Machining Carbon Steel Milling Bits Flat Solid Carbide End Mill
♦️4 Flute milling cutter is suitable for processing stainless steel and steel below HRC45
♦️Fully sharpened cutting edge, sharp cutting, wear-resistant and durable make a strong guarantee for the service life of the milling cutter
♦️The use of micro-grain tungsten steel material has higher wear resistance and strength, and belongs to the exclusive milling cutter for high-hardness high-speed cutting applications
♦️Size :
✨3*9*50L*4D
✨4*12*50L*4D
✨6*15*50L*4D
✨12*30*75L*4D
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌P80 Plasma CNC Torch
♦️Plasma Cutting Torch for up to 100A
♦️Can be used for LGK-63IGBT and LGK-100IGBT or any other type of plasma up to 100A cutting current
♦️Cutting Capacity: The P80 torch can cut mild steel up to 35mm thick and has a maximum cutting thickness of 1 inch (25mm)
♦️The P80 features an ergonomic handle for comfortable grip and less fatigue during prolonged use
♦️Duty Cycle: Typically rated at 60% duty cycle at 80A.
♦️Air Pressure: Requires an air pressure of 3.5-5.5 bar.
♦️Length: The torch lead is commonly 5 meters (16 feet) long.
♦️Cooling Type: Air-cooled.
♦️Starting Method: Typically utilizes a pilot arc for easy starting.
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌F2100B 2 Axis CNC Controller for CNC Plasma Cutting Machine
♦️Control Axis：2
♦️Control accuracy ：+/-0.001mm
♦️Coordinate range：+/- 99999.999mm
♦️Max pulses : 200kHz Max speed：15000 mm/m
♦️Max lines of code：150000lines
♦️Max size of single code file：4M
♦️Time resolution ：10ms
♦️Working Voltage： DC 24V in put
♦️Working Temperature：-10℃-60℃. ♦️Relative Humidity, 0-95%.
♦️Monitor: 7 inch, 800*480, high definition 16 million colors and high brightness LCD
♦️Memory: 64M SDRAM
♦️Program space available for user: 256M electronic hard disk
♦️CPU frequency: 400MHz
♦️USB: USB 1.1 front interface, at least 16GB U disk supportable
♦️Keyboard: PCB keyboard
♦️Chassis: full-steel structure completely shielded which defends electromagnetic radiation, interference and static electricity
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌Water Chiller CW-5200 6L for CO2 Laser Engraver & Cutting, Cold Plunge Chiller, Laser Chiller, Industrial Water Cooler
♦️High-Capacity Cooling for Laser Machines.Designed for 60W-150W CO2 laser engraving/cutting systems
♦️this CW-5200 chiller delivers 5,699 BTU/h cooling power with a 6L tank and 3.43 GPM flow rate
♦️The 0.9HP compressor ensures stable temperature control for continuous operation
♦️Precision temperature control maintains a stable cooling temperature as low as 5°C (41°F) with energy-efficient R-410a refrigerant technology
♦️Advanced Cooling Performance – Ideal for applications requiring precise thermal management
♦️Wide Fluid Compatibility – Works with deionized water or ≤30% antifreeze mixtures
♦️Simplified Maintenance & Compatibility
♦️Works seamlessly with CO2 laser tubes (60W-150W).
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌HGR Rail Dust Cover
♦️【Practical Three-Proof Cloth Materials】This Milling Machine Protective Bellows Cover Is Made Of Three-Proof Cloth Materials And Is Practical.
♦️【Quiet And Flexible】This Bellows Cover Has Good Folding Resistance And Tensile Properties, And Runs Quietly And Smoothly. It Is Very Soft And Easy To Use.
♦️【Oil-Proof, Dust-Proof And Waterproof】This Bellows Cover Is Designed To Provide High Strength And Oil-Proof, Dust-Proof And Waterproof Protection. It Keeps Your Machine Safe And Clean.
♦️【Smooth Texture And High Processing Standards】The Smooth Texture Of This Bellows Cover for Ensures Smooth Operation. It Has High Process Requirements To for Ensure Its Quality.
♦️【Easy to Use】With super soft and foldable design, this dust cover is and use. It can be effortlessly stretched to fit various lengths, providing hassle-free protection for your machine.
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌 Nema 34 Stepper Motor
Nema 34 Stepper Motor 6A 12Nm (1700 oz-in) 156mm Length for CNC Router Mill Lathe
♦️ Speed 50000 RPM
♦️ Voltage 48 Volts, 500 Volts
♦️ Horsepower 0.8 hp
♦️ Material Copper
♦️ Nema 34 156mm length stepper motor.
♦️ Holding Torque: 12Nm (1700oz.in)
♦️ Weight: 5.2kg
♦️ Specifications:
✨ Step Angle: 1.8°
✨ Step Accuracy: 5%
✨ Rated Current/phase: 6.2A
✨ Rated voltage: 36V/48V
✨ Resistance/phase: 0.8ohms
✨ Inductance/phase: 9mH±20%(1KHz)
✨ Insulation Resistant 100 MOhm Min 500V DC
✨ Ambient Temperature: -20°C~+50°C
✨ Control Cable: 4
Price: 27500 Birr
Contact 📱0914-839754 @R0bel
📱0974197825
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 554
📌AIGT 2MD860HS Stepper Motor Driver 18-80VAC 7.2A
♦️Voltage input range:
✨VDC: Does not support
✨VAC: 18V-80V
♦️Can drive 4-wire, 8-wire two-phase stepper motor
♦️Maximum current: 7.2A, resolution: 0.1A
♦️Subdivision range: 400~25600ppr
♦️Signal input: differential / single-ended, pulse / direction or double pulse
♦️Impulse response frequency: 200KHz
Built-in micro-segment
♦️Power-on parameter auto-tuning function
♦️Precision current control greatly reduces motor heating
♦️The current is automatically halved at rest
♦️Optically isolated signal input, strong anti-interference ability
♦️With overvoltage, overcurrent and other protection functions.
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
