ASHCHARYA BANSAL

My RCFL Interview Experience (Mechanical): RCFL - Rashtriya Chemicals & Fertilizers Limited (A Mini - Ratna Category PSU under Ministry of Chemicals and Fertilizers of the Government of India) Timeline of Events: 29-06-2020 = Application Registration Starts 15-07-2020 = Application Registration Ends 01-11-2020 = Online Exam (Initially scheduled on 16-08-2020 but postponed due to Covid Issue) 01-01-2021 = Result of Online Exam 19-01-2021 = Personal Interview 30-01-2021 = Result of Personal Interview 10-02-2021 = Medical Test 17-03-2021 = Received Offer Letter (Joining is to be done within a month from the date of receiving offer letter) Date : 19-01-2021 Reporting Time : 07.00AM Venue : RCF Guest House, Chembur, Mumbai Total Vacancy is 48 for Mechanical, so 341 candidates (a ratio of 1:7) were called for the interview on different dates. On my interview day, around 50 candidates were called and document verification + interview is conducted on the same day for these 50 candidates. Initially, it started with document verification by 07.00AM which lasted till 10.30AM (meanwhile breakfast & lunch is provided to all candidates at free of cost). Then interview process started and one by one, candidates were interviewed till evening. My turn came around 03.45PM. Panel was very friendly and supportive. Even if we are unable to answer, they will try to give clues so that we can figure out the solution Panel Members - 6 Nos 1 Female, 5 Male Interview Duration : Around 10 - 13 Minutes for each candidate 1) Tell me about yourself 2) What do u know about RCF 3) How many units are there in RCF 4) What are the raw materials required for production of fertilizers 5) What are the Mechanical equipments you expect to find in RCFL (I have done in-plant training from pump industry, so questions were asked from that) 6) What are products that company manufactures 7) Working principle of Centrifugal Pump 8) Name of the pump which is immersed in water along with motor 9) If I use a fluid which is having low vapour pressure, how can I use a Centrifugal pump to pump this fluid 10) Performance Characteristics Curves of Centrifugal Pump (Power vs RPM, Head vs RPM, Discharge vs RPM, Efficiency vs RPM) 11) Affinity Laws of Centrifugal Pump (My project is on heat exchangers , so questions were asked from that) 12) Explain about your project 13) If we increase the pressure of the flowing fluid, then what should be done to the tube thickness, should the tube thickness increase or decrease 14) If we increase the temperature of hot fluid inlet (for eg: earlier the hot fluid inlet temperature was 200°C but now it is increased to 400°C), what modifications should be done so that the exit temperature is same in both the cases 15) Famous Things about my hometown 16) Why u choose RCFL , why not NLCIL (since I'm from neyveli, this question was asked) 17) Have u written NLC Exam (since NLC Exam and RCFL are conducted during the same month and both are recruiting Mechanical Engineers, so this question was asked) 18) What are ur hobbies Final Result Status : Selected Results Declared on Jan 30, 2021

My RCFL Interview Experience (Mechanical): RCFL - Rashtriya Chemicals & Fertilizers Limited (A Mini - Ratna Category PSU under Ministry of Chemicals and Fertilizers of the Government of India) Timeline of Events: 29-06-2020 = Application Registration Starts 15-07-2020 = Application Registration Ends 01-11-2020 = Online Exam (Initially scheduled on 16-08-2020 but postponed due to Covid Issue) 01-01-2021 = Result of Online Exam 19-01-2021 = Personal Interview 30-01-2021 = Result of Personal Interview 10-02-2021 = Medical Test 17-03-2021 = Received Offer Letter (Joining is to be done within a month from the date of receiving offer letter) Date : 19-01-2021 Reporting Time : 07.00AM Venue : RCF Guest House, Chembur, Mumbai Total Vacancy is 48 for Mechanical, so 341 candidates (a ratio of 1:7) were called for the interview on different dates. On my interview day, around 50 candidates were called and document verification + interview is conducted on the same day for these 50 candidates. Initially, it started with document verification by 07.00AM which lasted till 10.30AM (meanwhile breakfast & lunch is provided to all candidates at free of cost). Then interview process started and one by one, candidates were interviewed till evening. My turn came around 03.45PM. Panel was very friendly and supportive. Even if we are unable to answer, they will try to give clues so that we can figure out the solution Panel Members - 6 Nos 1 Female, 5 Male Interview Duration : Around 10 - 13 Minutes for each candidate 1) Tell me about yourself 2) What do u know about RCF 3) How many units are there in RCF 4) What are the raw materials required for production of fertilizers 5) What are the Mechanical equipments you expect to find in RCFL (I have done in-plant training from pump industry, so questions were asked from that) 6) What are products that company manufactures 7) Working principle of Centrifugal Pump 8) Name of the pump which is immersed in water along with motor 9) If I use a fluid which is having low vapour pressure, how can I use a Centrifugal pump to pump this fluid 10) Performance Characteristics Curves of Centrifugal Pump (Power vs RPM, Head vs RPM, Discharge vs RPM, Efficiency vs RPM) 11) Affinity Laws of Centrifugal Pump (My project is on heat exchangers , so questions were asked from that) 12) Explain about your project 13) If we increase the pressure of the flowing fluid, then what should be done to the tube thickness, should the tube thickness increase or decrease 14) If we increase the temperature of hot fluid inlet (for eg: earlier the hot fluid inlet temperature was 200°C but now it is increased to 400°C), what modifications should be done so that the exit temperature is same in both the cases 15) Famous Things about my hometown 16) Why u choose RCFL , why not NLCIL (since I'm from neyveli, this question was asked) 17) Have u written NLC Exam (since NLC Exam and RCFL are conducted during the same month and both are recruiting Mechanical Engineers, so this question was asked) 18) What are ur hobbies Final Result Status : Selected Results Declared on Jan 30, 2021

Sir, IOCL interview experience, dated 13.10.2022: GD topic: Online shopping boon or Bain. GT: Make a plan of how you would have implemented lockdown if you were in a position. Interview: HR: 1) Why do you want to leave NLC ? 2) Why to join IOCL? Tech: 3) what will happen if you partially or fully close valves at suction or discharge? 4) what is the function of valves in a pipe? 5) A,B,C analysis of inventory? 6) any Soft skills like Software etc ? 7) About BTech project? 8) Why the badminton racket is designed like that, why we cannot put a flat elastic material like that in TT?

NLC INTERVIEW

NLC INTERVIEW

NLC INTERVIEW

My RCFL Interview Experience (Mechanical): Date : 19-01-2021 Reporting Time : 07.00AM Venue : RCF Guest House, Chembur, Mumbai Total Vacancy is 48 for Mechanical, so 341 candidates (a ratio of 1:7) were called for the interview on different dates. On my interview day, around 50 candidates were called and document verification + interview is conducted on the same day for these 50 candidates. Initially, it started with document verification by 07.00AM which lasted till 10.30AM (meanwhile breakfast & lunch is provided to all candidates at free of cost). Then interview process started and one by one, candidates were interviewed till evening. My turn came around 03.45PM. Panel was very friendly and supportive. Even if we unable to answer, they will try to give clues so that we can figure out the solution Panel Members - 6 Nos 1 Female, 5 Male Interview Duration : Around 10 - 13 Minutes for each candidate 1) Tell me about yourself 2) What do u know about RCF 3) How many units are there in RCF 4) What are the raw materials required for production of fertilizers 5) What are the Mechanical equipments you expect to find in RCFL (I have done in-plant training from pump industry, so questions were asked from that) 6) What are products that company manufactures 7) Working principle of Centrifugal Pump 8) Name of the pump which is immersed in water along with motor 9) If I use a fluid which is having low vapour pressure, how can I use a Centrifugal pump to pump this fluid 10) Performance Characteristics Curves of Centrifugal Pump (Power vs RPM, Head vs RPM, Discharge vs RPM, Efficiency vs RPM) 11) Affinity Laws of Centrifugal Pump (My project is on heat exchangers , so questions were asked from that) 12) Explain about your project 13) If we increase the pressure of the flowing fluid, then what should be done to the tube thickness, should the tube thickness increase or decrease 14) If we increase the temperature of hot fluid inlet (for eg: earlier the hot fluid inlet temperature was 200°C but now it is increased to 400°C), what modifications should be done so that the exit temperature is same in both the cases 15) Famous Things about my hometown 16) Why u choose RCFL , why not NLCIL (since I'm from neyveli, this question was asked) 17) Have u written NLC Exam (since NLC Exam and RCFL are conducted during the same month and both are recruiting Mechanical Engineers, so this question was asked) 18) What are ur hobbies

Sir, IOCL interview experience, dated 13.10.2022: GD topic: Online shopping boon or Bain. GT: Make a plan of how you would have implemented lockdown if you were in a position. Interview: HR: 1) Why do you want to leave NLC ? 2) Why to join IOCL? Tech: 3) what will happen if you partially or fully close valves at suction or discharge? 4) what is the function of valves in a pipe? 5) A,B,C analysis of inventory? 6) any Soft skills like Software etc ? 7) About BTech project? 8) Why the badminton racket is designed like that, why we cannot put a flat elastic material like that in TT?

My RCFL Interview Experience (Mechanical): Date : 19-01-2021 Reporting Time : 07.00AM Venue : RCF Guest House, Chembur, Mumbai Total Vacancy is 48 for Mechanical, so 341 candidates (a ratio of 1:7) were called for the interview on different dates. On my interview day, around 50 candidates were called and document verification + interview is conducted on the same day for these 50 candidates. Initially, it started with document verification by 07.00AM which lasted till 10.30AM (meanwhile breakfast & lunch is provided to all candidates at free of cost). Then interview process started and one by one, candidates were interviewed till evening. My turn came around 03.45PM. Panel was very friendly and supportive. Even if we unable to answer, they will try to give clues so that we can figure out the solution Panel Members - 6 Nos 1 Female, 5 Male Interview Duration : Around 10 - 13 Minutes for each candidate 1) Tell me about yourself 2) What do u know about RCF 3) How many units are there in RCF 4) What are the raw materials required for production of fertilizers 5) What are the Mechanical equipments you expect to find in RCFL (I have done in-plant training from pump industry, so questions were asked from that) 6) What are products that company manufactures 7) Working principle of Centrifugal Pump 8) Name of the pump which is immersed in water along with motor 9) If I use a fluid which is having low vapour pressure, how can I use a Centrifugal pump to pump this fluid 10) Performance Characteristics Curves of Centrifugal Pump (Power vs RPM, Head vs RPM, Discharge vs RPM, Efficiency vs RPM) 11) Affinity Laws of Centrifugal Pump (My project is on heat exchangers , so questions were asked from that) 12) Explain about your project 13) If we increase the pressure of the flowing fluid, then what should be done to the tube thickness, should the tube thickness increase or decrease 14) If we increase the temperature of hot fluid inlet (for eg: earlier the hot fluid inlet temperature was 200°C but now it is increased to 400°C), what modifications should be done so that the exit temperature is same in both the cases 15) Famous Things about my hometown 16) Why u choose RCFL , why not NLCIL (since I'm from neyveli, this question was asked) 17) Have u written NLC Exam (since NLC Exam and RCFL are conducted during the same month and both are recruiting Mechanical Engineers, so this question was asked) 18) What are ur hobbies #rcfl #rcflmechanical #rcflmanagementtrainee #rcflmtmech #rcflmtmechanical #rcflinterview #rcflinterviewexperience

NLC INTERVIEW EXPERIENCE

My RCFL Interview Experience (Mechanical): Date : 19-01-2021 Reporting Time : 07.00AM Venue : RCF Guest House, Chembur, Mumbai Total Vacancy is 48 for Mechanical, so 341 candidates (a ratio of 1:7) were called for the interview on different dates. On my interview day, around 50 candidates were called and document verification + interview is conducted on the same day for these 50 candidates. Initially, it started with document verification by 07.00AM which lasted till 10.30AM (meanwhile breakfast & lunch is provided to all candidates at free of cost). Then interview process started and one by one, candidates were interviewed till evening. My turn came around 03.45PM. Panel was very friendly and supportive. Even if we unable to answer, they will try to give clues so that we can figure out the solution Panel Members - 6 Nos 1 Female, 5 Male Interview Duration : Around 10 - 13 Minutes for each candidate 1) Tell me about yourself 2) What do u know about RCF 3) How many units are there in RCF 4) What are the raw materials required for production of fertilizers 5) What are the Mechanical equipments you expect to find in RCFL (I have done in-plant training from pump industry, so questions were asked from that) 6) What are products that company manufactures 7) Working principle of Centrifugal Pump 8) Name of the pump which is immersed in water along with motor 9) If I use a fluid which is having low vapour pressure, how can I use a Centrifugal pump to pump this fluid 10) Performance Characteristics Curves of Centrifugal Pump (Power vs RPM, Head vs RPM, Discharge vs RPM, Efficiency vs RPM) 11) Affinity Laws of Centrifugal Pump (My project is on heat exchangers , so questions were asked from that) 12) Explain about your project 13) If we increase the pressure of the flowing fluid, then what should be done to the tube thickness, should the tube thickness increase or decrease 14) If we increase the temperature of hot fluid inlet (for eg: earlier the hot fluid inlet temperature was 200°C but now it is increased to 400°C), what modifications should be done so that the exit temperature is same in both the cases 15) Famous Things about my hometown 16) Why u choose RCFL , why not NLCIL (since I'm from neyveli, this question was asked) 17) Have u written NLC Exam (since NLC Exam and RCFL are conducted during the same month and both are recruiting Mechanical Engineers, so this question was asked) 18) What are ur hobbies

If u r demotivated during your preparation then pls go through this Few days back shared by one student How my jaourney started.. 10th - 59.8% after 1 fail 12th -62.4% after 2 fail (You can now see how much below average student I was) Aieee- 32000 rank(2011) and 2012 also aieee rank was near to this. 2012-Taken admission in private college I was 2nd batch of my college. After till 2nd year I was only student in college who has not any back , but by my friends graces I got I back in Tom 2 in 3rd year. 2015- Started preparation for GATE and ESE only student with one another friend who has dare to do that but lack of motivation . We haven't got any right direction from any seniors or teachers . 2016-18- as I was more inclined towards army- Given 11 SSBs (army , navy , coast guard) Screened out , not recommended, recommend but (flat feet medical out- not disclosed to any one till now- secret within me ) Taken the session of psychiatrist also to improve myself (as past was dark🤩) 2018 - taken admission in Madeeasy (one stop solution for technical- as I was already done with my aspire , now new aspire has to be build) 2018 - Gate - missed 1st exam qualified- goa shipyard limited (assistant manager)- written qualified - interview out UPRVUNL ae- written not qualified CIL - Written not qualified UPSC OFB JWM- Written out 2019 - Gate - less score IES - not qualified in pre Ssc je - 2017 missed pre by .3 marks FACT MT- interview out SSC je 2018 - Written qualified , interview qualified - merit out DMRC JE - missed the exam (1min late -gate closed) Ssc cgl- tier 3 missed (again late by 1 Min at gate)(tier 1 and 2 was qualified) Same year many exams written out like(SJVN , BHEL , CSL , AAI, JPSC AE PRE) 2020- Rajasthan PSC AE- mains out Ssc je 2019- written qualified, mains qualified- waiting for DV SSC JE 2020 - form rejected Sports authority of India - interview out RRB JE- WAITING LIST ESE PRE-2020- Railway vacancy withdrawn (missed by 1 no. to qualify for mains) Nlc/rcfl - written out UPPSC - written out 2021- CIL - interview out SPMCIL- Interview out ISRO SCIENTIST- interview out HAL DT- interview out NRL- waiting for interview (9dec) HRRL- waiting for interview (expected in DEC) ESE PRE (QUALIFIED) - MAINS WRITTEN- waiting for mains result UPRVUNL- Written qualified-(score was near to cutoff - interview (more personal life question - journey which I have mentioned) - still in dilemma But finally selected--- Rat ki neend ud gayi thi aaj k liye..😁

Live session started Pls join https://t.me/Engineeringtalk

HPCL 2025 paper

Feel the ENERGY JAI SHREE RADHE 😍😍❤️❤️🙏🙏

HPCL 2025 memory based question. Pls share memory based question of HPCL EXAM on my what’s app 9205326638

Pls share memory based question of HPCL EXAM on my what’s app 9205326638

RADHE KRISHNA RADHE KRISHNA KRISHNA KRISHNA RADHE RADHE 🙏🙏