AECPlus App & YT discussion channel

According to IS 800-2007, the maximum value of effective slenderness ratio for compression flange of a beam against lateral torsional buciding is

As per IS 456:2000, to ensure the lateral stability in a cantilever beam, the clear distance from the free end of the cantilever to the lateral restraint shall not exceed__. (b = breadth of the compression face midway b/w the lateral restraints.)

If the hard rock strata is at very great depth, then the feasible economical pile type is-

the plasticity index of soil lies above the A line. its permeability is :

A clay has unconfined compressive strength of 240 kN/sq.m in undisturbed state. The clay was then remolded & the unconfined compressive strength was found to be 60 kN/sq.m. The sensitivity of this clay is

If all dimensions of prismatic bar of square cross-section suspended freely from the ceiling of a roof are doubled then the total elongation produced by its own weight will increase

Neither the teacher nor the students __ present.

Many a student __ failed the exam.

The news __ true.

He is too weak __ walk.

A pair of shoes ______ bought by him yesterday.

Look! The sun ______ in the east. A) rise B) rises C) is rising D) rose

🥇The process of finishing mortar joints in exposed brickwork is called:

🥇A continuous horizontal layer of masonry is known as

🥇The horizontal mortar joint on which bricks are laid is called:

🥇In brick masonry, the vertical joints between bricks are known as:

🥇A projecting stone or brick used to support a joist or truss is called a:

This is the ______ book of the two.