Embedded Systems
Kanalga Telegramāda oātish
News, articles, guides, analytics, projects and startups from the embedded industry. Topics of the channel: ā½ļø machine learning ā½ļø internet of things ā½ļø embedded software ā½ļø advanced electronics ā½ļø new engineering ideas ā¤µļø Share and subscribe!
Ko'proq ko'rsatishš Telegram kanali Embedded Systems analitikasi
Embedded Systems (@embedded_system) Ingliz til segmentidagi kanali faol ishtirokchi. Hozirda hamjamiyat 13 823 obunachidan iborat bo'lib, Texnologiyalar & Aralashmalar toifasida 9 209-o'rinni va Niderlandiya mintaqasida 45-o'rinni egallagan.
š Auditoriya koārsatkichlari va dinamika
Š½ŠµŠ²ŃŠ“Š¾Š¼Š¾ sanasidan buyon loyiha tez oāsib, 13 823 obunachiga ega boāldi.
11 Iyul, 2026 dagi oxirgi maālumotlarga koāra kanal barqaror faollikka ega. Oxirgi 30 kunda obunachilar soni 85 ga, soānggi 24 soatda esa 9 ga oāzgardi va umumiy qamrov yuqori darajada qolmoqda.
- Tasdiqlash holati: Tasdiqlanmagan
- Jalb etish (ER): Auditoriya oārtacha 23.75% darajada jalb etiladi. Nashrdan keyingi dastlabki 24 soatda kontent odatda umumiy obunachilar sonining 6.05% ini tashkil etuvchi reaksiyalarni toāplaydi.
- Post qamrovi: Har bir post oārtacha 3 281 marta koāriladi; birinchi sutkada odatda 836 ta koārish yigāiladi.
- Reaksiyalar va oāzaro taāsir: Auditoriya faol: har bir postga oārtacha 5 ta reaksiya keladi.
- Tematik yoānalishlar: Kontent programming, microcontroller, battery, pcb, pico kabi asosiy mavzularga jamlangan.
š Tavsif va kontent siyosati
Muallif resursni shaxsiy fikrni ifoda etish maydoni sifatida taāriflaydi:
āNews, articles, guides, analytics, projects and startups from the embedded industry.
Topics of the channel:
ā½ļø machine learning
ā½ļø internet of things
ā½ļø embedded software
ā½ļø advanced electronics
ā½ļø new engineering ideas
ā¤µļø Share and subscribe!ā
Yuqori yangilanish chastotasi (oxirgi maālumot 12 Iyul, 2026 da olingan) sababli kanal doimo dolzarb va katta qamrovli boālib qoladi. Analitika auditoriya kontent bilan faol hamkorlik qilishini, uni Texnologiyalar & Aralashmalar toifasidagi muhim taāsir nuqtasiga aylantirishini koārsatadi.
13 823
Obunachilar
+924 soatlar
+367 kunlar
+8530 kunlar
Postlar arxiv
13 823
š MagPi (July 2021)
The latest copy of the official Raspberry Pi magazine. 50 pages of projects & tutorials.
Inside The MagPi magazine #107:
ā«ļø Become a Raspberry Pi genius. Gain a deeper understanding of Raspberry Pi and learn essential maintenance techniques.
ā«ļø Make a weather watcher. Use Raspberry Pi and an e-ink display to tap into a Weather API and build an always-on weather watcher.
ā«ļø Recreate the Mars helicopter. One maker has used NASAās F prime open-source operating system (being used to control Ingenuity on Mars) with an off-the-shelf drone.
ā«ļø Brilliant handheld projects. Discover these ābig buildsā that you can make in a small space.
ā«ļø Add vinyl decals to your arcade machine. KGās incredible arcade machine starts to take shape with the artwork attached. Learn to make an arcade machine that looks as good as it plays.
ā«ļø Marty the Robot v2. We review this two-legged walking robot controlled by Raspberry Pi.
ā«ļø ...and more!
#books #raspberry #magpi
13 823
š¤ Arduino based SCARA Robot
In this tutorial we will learn how to build an Arduino based SCARA Robot
The robot has 4 degrees of freedom and itās driven by 4 NEMA 17 stepper motors. Additionally, it has a small servo motor for controlling the end effector or the robot gripper in this case.
The brain of this SCARA robot is an Arduino UNO board which is paired with a CNC shield and four A4988 stepper drivers for controlling the motors.
More information...
#projects #arduino #robots #3d_modeling
13 823
š¤ FLIR FirstLook
FLIR FirstLook is a throwable, rugged, and expandable robot that provides immediate situational awareness, performs persistent observation and investigates dangerous and hazardous material while keeping its operator out of harmās way.
FirstLook allows operations where other robots canāt fit or maneuver. This rugged, lightweight robot can be inserted into structures and provides operators with visual, audio, and sensor feedback before entry. The robot climbs small obstacles, overcomes curbs, turns in place and self-rights when flipped over.
Weighing 3 kg, FirstLook survives 5 m drops onto concrete and climbs obstacles up to 17.8 cm high.
More information...
#articles #robots
13 823
š Embedded Podcast: Robot at the Park (snippet)
Erin Kennedy spoke with us about learning new things, nice robots at the beach, lighting up fog voxels, and being part of the maker community. Erinās Robot Missions was founded to develop robots to clean shorelines of plastic.
Erin also worked on a Hackaday Dream Team that worked on innovations to reduce the environmental impact of lost or abandoned fishing equipment.
More information...
#podcasts #robots
13 823
+3š Adafruit Trinkey QT2040
A USB Key with the power of RP2040
Adafruit have taken Raspberry Piās RP2040, the same SoC found in the Raspberry Pi Pico, and placed it into something different. A USB key shaped device with no GPIO and limited connectivity. Trinkey QT2040 is designed for plug and play use and can be connected to any computer running any operating system.
Trinkey QT2040 is compatible with C / C++ and MicroPython, but to get the best from this board we really need to use CircuitPython. With CircuitPython we have an easy to use dialect of Python 3, a large selection of libraries ensuring we can pick up and connect a Stemma QT / Qwiic board and start hacking. CircuitPython is the ideal way to experience Trinkey QT2040.
The USB form factor means that Trinkey QT2040 can be connected to a computer which requires quick access to a hardware hacking platform. Need to hack some I2C components, Trinkey QT2040 will enable you to plug in and hack.
More information...
#articles #hardware #boards
13 823
š« MakAir ā open-source Covid-19 Ventilator
The world's first open-source ventilator tested on human patients. Mass-producible at a low cost (~2000ā¬).
Makair ventilator is the world's first open-source ventilator tested with success on human patients with ongoing clinical trials in France.
This project provides all the parts required to build a good-enough ARDS ventilator from mass-produced components. We provide all the required mechanical parts, electronics designs & boards, and firmwares.
This ventilator can be 3D-printed and ran on an Arduino board, though we highly advise that you work with industrial processes as to mold medical-grade plastic parts and assemble the whole ventilator.
Features include:
ā«ļø Pressure controlled ventilation
ā«ļø Volume controlled ventilation
ā«ļø BiPap ventilation
ā«ļø 4 hours battery life
ā«ļø Medical-grade alarms
ā«ļø High flow turbine
ā«ļø Fault tolerant design
More information...
#projects #arduino
13 823
š° Intel CEO says chip shortage will hit bottom in late 2021
Intel Corp. Chief Executive Pat Gelsinger predicted the shortage of semiconductors thatās hurting industries from automotive to consumer electronics will bottom out in the second half of this year before starting to improve.
āI donāt expect the chip industry is back to a healthy supply-demand situation until ā23,ā he said in an interview. āFor a variety of industries, I think itās still getting worse before it gets better.ā
Longer term, the chip industry is positioned for a period of growth, Gelsinger predicted. Over the next decade, the increasing uses for chips ā including 5G phone systems, electric vehicles and expanded artificial intelligence ā will drive strong demand, he said.
More information...
#news
13 823
š§ How to Integrate Artificial Intelligence into Your Workflow
MathWorksā Johanna Pingel talks about how engineers can use artificial intelligence to optimize their workflows
In engineering terms, the concept of AI actually spans four steps within a workflow: data preparation, modeling, simulation and testing, and deployment.
The first step, data preparation, is arguably the most important. Often, when deep-learning models donāt work the way theyāre expected to, engineers focus on the second stageāfine-tuning their model, tweaking its parameters, and implementing multiple training iterations.
They fail to realize that to be effective, AI models need to be trained on robust, accurate data. Preprocessing the data and ensuring itās correctly labeled helps ensure the model will be capable of understanding the data.
More information...
#articles #artificial_intelligence
13 823
š
FarmBot - open-source farming robot
FarmBot is an open source precision agriculture CNC farming project consisting of a Cartesian coordinate robot farming machine, software and documentation including a farming data repository. This interesting start-up focuses on bringing private automated farms to its clients. Robot uses machine learning algorithms for plants' analysis and takes actions depending on its results.
The FarmBot Genesis is able to plant over 30 different crops including potatoes, peas, squash, artichokes and chard in an area of 2.9 meters Ć 1.4 meters with a maximum plant height of 0.5 meters.
The Farmbot Genesis can perform almost all processes prior to harvesting including sowing, mechanical weed control and watering. It requires electricity, an internet connection and water supply which can be provided using off grid solutions including a water barrel to collect rain and a solar panel and battery to provide electricity.
More information...
#robots #machine_learning
13 823
š Astonishing Robotics Industry Statistics You Should Know in 2021
Some of the statistics key points:
ā«ļø There were 12 million robotic units worldwide in 2020.
ā«ļø Global spending on military robotics will be $16.5 billion in 2025.
ā«ļø The robotics industry already employes about 150,000 people worldwide in engineering and assembly jobs.
ā«ļø The number of robotic units sold in 2020 rose to 465,000.
ā«ļø Between 2020 and 2022, there would be a 12% increase in shipments of robots worldwide.
ā«ļø Collaborative robots will constitute 34% of all robot sales by 2025.
ā«ļø 88% of businesses worldwide plan to adopt robotic automation into their infrastructure.
ā«ļø In 2020, North American businesses ordered 31,044 robotics.
If it is not already in your industry, chances that it would be sooner rather than later are very high. According to robotics industry statistics, the presence of robots in every industry brings about improved results and increased revenue.
More information...
#robots #articles #news
13 823
+3š 3dasd - open-source DIY room-scale 3D scanner
The goal is to make this as accessible as possible! However, at this point you need to have access to a 3D printer, do some very basic soldering and assemble a few cables (JST connectors).
This is not a production-grade scanner, itās way too slow, loud and just not accurate enough for most real-world applications. It could be a great entry into the world of 3D scanning though.
A very-very rough estimate would be around 350 USD with the bulk of it being the LIDAR sensor.
More information:
Official website
Github page
#projects #3d_modeling
13 823
š Basel Halak - Authentication of Embedded Devices (2021)
The authors discuss emerging solutions for embedding unforgeable identifies into electronics devices, using techniques such as IC fingerprinting, physically unclonable functions and voltage-over-scaling.
ā«ļø Provides deep insight into the security threats undermining existing integrated circuit authentication techniques;
ā«ļø Includes an in-depth discussion of the emerging technologies used to embed unforgeable identifies into electronics systems;
ā«ļø Offers a comprehensive summary of existing authentication protocols and their limitations;
ā«ļø Describes state-of-the-art authentication protocols that provide better physical security and more efficient energy consumption;
ā«ļø Includes detailed case studies on the emerging applications of IC authentication schemes.
#books #design #security
13 823
š° Developments in the field of flexible electronics: Samsung and Stanford Ease Manufacturing
This article will discuss two academic developments to see where this industry could be headed and what challenges lie ahead.
In a new paper from Stanford University, researchers propose a new method of manufacturing these flexible 2D electronics.
The technique consists of taking a non-flexible, solid block of silicon coated with glass and using chemical vapor deposition to grow MoSā one layer of atoms at a time until it reaches a three atom thickness. The end structure, including the polyimide, is just 5 microns thick, about 10x thinner than a human hair.
Additionally, this month, Samsung published a new paper in which they detail how they were able to create a new flexible wearable device, which states that it can be integrated into preexisting semiconductor processes. This innovation might help push the concept of flexible electronics closer towards mass production.
More information...
#news #electronics
13 823
š° Developments in the field of flexible electronics: Samsung and Stanford Ease Manufacturing
This article will discuss two academic developments to see where this industry could be headed and what challenges lie ahead.
In a new paper from Stanford University, researchers propose a new method of manufacturing these flexible 2D electronics.
The technique consists of taking a non-flexible, solid block of silicon coated with glass and using chemical vapor deposition to grow MoSā one layer of atoms at a time until it reaches a three atom thickness. The end structure, including the polyimide, is just 5 microns thick, about 10x thinner than a human hair.
Additionally, this month, Samsung published a new paper in which they detail how they were able to create a new flexible wearable device, which states that it can be integrated into preexisting semiconductor processes. This innovation might help push the concept of flexible electronics closer towards mass production.
More information...
#news #electronics
13 823
+2š Is There Life without the PLC? How to Build a Better Embedded Controller
While Programmable Logic Controllers (PLCs) are an industry norm, demands for data, memory, and processing power are intensifying. Soon enough, the PLCs may no longer be the go-to industrial computer.
By embedded control architecture, we mean a controller that is located inside the machine that will be controlled. Such an embedded controller is almost always a Printed Circuit Board (PCB), but in theory, it could be something else.
By PLC-based control architecture, we mean PLCs mounted in a box located outside of the machine somewhere, connected to the machine by cables.
Comparing the remote PLC-based approach to a local embedded approach the benefits are:
ā«ļø Simplification of machine installation and operation
ā«ļø Improved motion performance and sensor data
ā«ļø Smaller, simpler controller
ā«ļø Simplified machine assembly
ā«ļø Lower per-unit cost
More information...
#articles #control #design
13 823
+4š Building the Solar Farm installation
A very interesting series of articles with lots of photos about building a modern private Solar Farm and connecting it to the local grid.
Russell Graves, electronics enthusiast from Idaho, describes the whole process of building Solar Farm including wiring, controlling plant, etc.
How well does his solar farm work out? Sometimes the panels produce a lot of power, sometimes nearly nothing, but it has been up and running for all of winter and into spring.
Over the winter, Russel pulled a total of 3.1 MWh from the grid, mainly because his home is heated with electric power. But once spring hit, he started pushing considerably more into the grid than he was pulling; on some days his setup produces around 95 kWh, of which about 70 kWh gets exported.
More information:
Part 1
Part 2
...
Part 11
Part 12
#articles #energy
13 823
š“ CanguRo: Intelligent Robot - Transformable and Ridable
The fundamental concept of CanguRo is the mechanical horse ā a future machine lifeform produced from the latest robotics and AI technologies fused by product design. As a partner robot, it never leaves the side of its master. When the master wants to go somewhere, it transforms itself into a vehicle.
In robot mode, CanguRo operates like a buddy droid in a movie. As a loyal partner, it follows its master in shopping malls, giving help at times.
When the master wishes to travel, CanguRo automatically transforms itself into ride mode. In ride mode, CanguRo supports its master as an integral part of his or her body. As the master leans right and left to make a turn, robot actively transforms its body and leans accordingly.
Roid mode:
ā«ļøLocalization and mapping
ā«ļøAutonomous travel
ā«ļøAutomatic human following
ā«ļøOperation via a tablet
Ride mode:
ā«ļøActive Lean
ā«ļøSmart stop
ā«ļøBilateral control handle bars
ā«ļøBody-sonic system
More information...
#robots
13 823
š Cognitive Engineering for Next Generation Computing: A Practical Analytical Approach (2021)
Cognitive computing is a hardware and software element which is presently being used mainly in smart system development. Technologies such as artificial intelligence, machine learning, advanced analytics, natural language processing, big data analytics, and distributed computing come under the umbrella of cognitive computing.
The book is aimed at researchers in electrical and computer engineering, mechatronics as well as all engineers working on Industry 4.0 standards. The book can also be used in post-graduate courses on Internet of Things, cognitive computing, and wireless communication.
#books #IoT #machine_learning #artificial_intelligence #design
