Embedded Systems

Відкрити в Telegram

News, articles, guides, analytics, projects and startups from the embedded industry. Topics of the channel: ◽️ machine learning ◽️ internet of things ◽️ embedded software ◽️ advanced electronics ◽️ new engineering ideas ⤵️ Share and subscribe!

Нідерланди46 Технології та додатки9 375...

📈 Аналітичний огляд Telegram-каналу Embedded Systems

Канал Embedded Systems (@embedded_system) у мовному сегменті Англійська є активним учасником. На даний момент спільнота об'єднує 13 713 підписників, посідаючи 9 375 місце в категорії Технології та додатки та 46 місце у регіоні Нідерланди.

📊 Показники аудиторії та динаміка

З моменту свого створення невідомо, проект продемонстрував стрімке зростання, зібравши аудиторію у 13 713 підписників.

За останніми даними від 22 червня, 2026, канал демонструє стабільну активність. Хоча за останні 30 днів спостерігається зміна кількості учасників на 98, а за останні 24 години на -7, загальне охоплення залишається високим.

Статус верифікації: Не верифікований
Рівень залученості (ER): Середній показник залученості аудиторії становить 11.75%. Протягом перших 24 годин після публікації контент зазвичай збирає N/A% реакцій від загальної кількості підписників.
Охоплення публікацій: В середньому кожен допис отримує 1 611 переглядів. Протягом першої доби публікація в середньому набирає 0 переглядів.
Реакції та взаємодія: Аудиторія активно підтримує контент: середня кількість реакцій на один пост – 9.
Тематичні інтереси: Контент зосереджений навколо ключових тем, таких як programming, microcontroller, battery, pcb, pico.

📝 Опис та контентна політика

Автор описує ресурс як майданчик для висловлення суб'єктивної думки:
“News, articles, guides, analytics, projects and startups from the embedded industry. Topics of the channel: ◽️ machine learning ◽️ internet of things ◽️ embedded software ◽️ advanced electronics ◽️ new engineering ideas ⤵️ Share and subscribe!”

Завдяки високій частоті оновлень (останні дані отримано 23 червня, 2026), канал підтримує актуальність та високий рівень охоплення публікацій. Аналітика показує, що аудиторія активно взаємодіє з контентом, що робить його важливою точкою впливу в категорії Технології та додатки.

13 713

Підписники

-724 години

-157 днів

+9830 день

1 611

Перегляди допису

Немає даних24 години

Немає даних48 годин

11.75%

Коефіцієнт залучення

Немає даних

Дописів на день

Ads index

beta

Архів дописів

13 713

📟 Monitor and Control Weather Station with Telegram Bot ESP32 based weather Station whose Sensor Readings can be fetched and Outputs can be controlled from anywhere using Telegram Application We'll add a feature to this weather station which makes it to be accessed and controlled from anywhere in the world. We'll create Telegram Bot for our Weather Station and program it to get interact and give responses about sensor readings and relay outputs whenever we will contact it using telegram Application from our Smartphone or from PC. More information... #projects #esp32 #IoT

13 713

🔧 PCB routing in Python Preferring to spend hours typing code instead of graphically pushing traces around in a PCB layout tool, [James Bowman] over at ExCamera Labs has developed CuFlow, a method for routing PCBs in Python. Whether or not you’re on-board with the concept, you have to admit the results look pretty good. More information: Project's review Github page #electronics #articles #experiments #python

13 713

📲 Over-the-Air Updates with AWS and FreeRTOS What you should know about over-the-air communications using AWS and FreeRTOS Updating firmware in the field has always been a critical component of even the earliest of embedded systems. Access to hardware interfacing tools like a JTAG or SWD programmer provides physical access to embedded system programming ports. Other access methods for firmware updates include interfaces such as USB, automotive CAN, a serial port, and so on. Wireless port connectivity has gained prominence as more embedded devices become part of the IoT. In today’s post, we will explore such wireless, over-the-air (OTA) communications using Amazon Web Services (AWS) and FreeRTOS. More information... #articles #IoT

13 713

📚 MagPi (March 2021) The latest copy of the official Raspberry Pi magazine. 42 pages of projects & tutorials. Inside The MagPi magazine #103: ▫️ Easy Raspberry Pi Pico Projects. Don’t get stuck with Raspberry Pi’s new microcontroller. These projects help you get started. ▫️ Recreate Amiga 600 with Raspberry Pi. Can’t afford a classic computer? 3D-print your own case and use Raspberry Pi on the inside. ▫️ Make a Pico Pomodoro Timer. Transform Pico into a digital timer with Pimoroni’s Display Pack. ▫️ Build a digital do-not-disturb sign. Wirelessly connect a digital screen and buttons to make a smart sign that alerts people when you’re busy. ▫️ Turbocharge Raspberry Pi 400 with an M.2 SSD drive. Make your Raspberry Pi 400 vastly faster with an SSD drive. #books #raspberry #magpi

13 713

📷 Discord Security Camera With an ESP32 Use an ESP32 Cam and a passive infrared (PIR) sensor to create a motion-activated security camera that will post a photo to a Discord channel, where you have access to create a webhook. We'll build out the test circuit, using a breadboard and jump wire. We'll then build a wiring harness using Dupont connectors to allow for easy connections to the development board and PIR sensor. We'll then use our choice of a wall or ceiling-mounted 3D printed case to contain our parts and our camera. The ceiling-mounted camera makes use of an inexpensive decoy camera that can be purchased online. More information... #projects #camera #esp32 #camera #IoT

13 713

📰 How NASA's Oxygen-Making Machine Could Change Mars Forever Whether for breathing or sending rockets back home, we'll need to make oxygen on Mars. Soon, we'll know if it's possible. According to NASA’s estimates, a four-person crew will need a lot of propellant—approximately 15,000 pounds of fuel and roughly 55,000 pounds of oxygen—to generate the thrust needed to leave the Martian surface and return home. Lugging all of that oxygen from Earth is a hassle. That’s where the Mars Oxygen In-Situ Resource Utilization Experiment, or MOXIE, comes in. Roughly the size of a car battery, MOXIE is one of NASA's many in-situ resource utilization (ISRU) experiments and the first to travel to space. In essence, ISRU is the agency’s version of homesteading, and the experiments explore ways for future spacefarers to produce things from resources available on other worlds. More information... #news #articles #experiments

13 713

🤖 3D Printed Robot Arm This robot arm is made almost entirely of 3D printed parts that snap together. It has three servo-controlled joints, plus a rotating base and gripper. The arm is controlled by a series of buttons that connect to an Arduino Uno hidden in the base. A simple circuit makes connecting the servos and buttons to the Arduino easy and makes set-up and assembly very quick. More information... #projects #robots #arduino #3d_modeling

13 713

🎬 Introducing Stretch Meet Stretch, a prototype of our new robot designed to automate box moving tasks in warehouses and distribution centers. Stretch’s mobile base allows it to go to where repetitive box lifting is required - unloading trucks, building pallets of boxes and order building. Stretch makes warehouse operations more efficient and safer for workers. https://youtu.be/yYUuWWnfRsk #video #robots #bostondynamics

13 713

🤖 Robot axes, drive safety, and power architectures Depending on the intended tasks, robots can have varying axes and various axis configurations - robot kinesiology A robot axis of motion is often called a degree of freedom (DoF). Robots with higher DoFs have access to a greater amount of space and can perform more complex tasks. 1-axis robot is capable of linear motion in a single dimension. 2-axis: is usually composed of two linear guides that enable two-dimensional motion, such as an x, y, or y, z configuration. 3-axis: is a basic 2-axis design with an additional linear axis guide, or a cylindrical guide, that enables x, y, z motion. 4-axis: adds the ability to rotate the object that it is holding. 5-axis: adds the ability for two-dimensional rotation of the object it is holding. 6-axis: can mimic the motions of a human arm with three linear DoF and three rotational DoF. 7-axis: design placed on a rail or stage that enables it it to move from point A to B. More information... #articles #robots

13 713

🔋 Big breakthrough for 'massless' energy storage In groundbreaking new research, scientists have made a structural battery 10 times better than in any previous experiment In the new paper, researchers from Chalmers University of Technology and KTH Royal Institute of Technology in Sweden reveal how their “massless” structural battery works. To make the new structural battery, the scientists layered a buffer glass “fabric” between a positive and negative electrode, then packed it with a space-age polymer electrolyte and cured it in the oven. What results is a tough, flat battery cell that conducts well and holds up to tensile tests in all directions. The battery’s combined qualities (or “multifunctionality”) make it 10 times better than any previous massless battery — a project scientists have worked on since 2007. More information... #news #battery #articles

13 713

🎚 Axiomtek’s eBOX560-52R-FL Axiomtek has announced eBOX560-52R-FL, which is a palm-size fanless embedded system featuring Intel Core and Celeron Whiskey Lake-U processors The eBOX560-52R-FL fanless embedded system comes with two independent 4K Ultra HD displays via DisplayPort++ and HDMI ports. The device features 2 GbE LAN for faster communication and networking, as well as one M.2 Key E 2230 for the Wi-Fi module. Features: ▫️ CPU: Core i5-8365UE (8th gen) & Intel Celeron 4305UE ▫️ Memory: includes 1 x 260-pin DDR4-2400 SO-DIMM, maximum up to 32GB ▫️ 2x RS-232/422/485 for transmission protocols ▫️ USB – 2 x USB 2.0 and 2 x USB 3.1 Gen2 ▫️ Multiple display ports, including DisplayPort++ and HDMI port ▫️ Watchdog timer with 65535 levels ranging from 1 to 65536 sec More information... #boards #intel

13 713

🚰 Arduino controlled smart irrigation system There are plenty of projects out there that automate irrigation. Many focus on the problem of automatically reacting to dry soil by opening a single valve, but a fully automated system with one valve is not what I want for my lawn. I do not want the sprinklers to turn on unexpectedly and I had to solve a different type of problem: Managing a specific irrigation program with individual control over each sprinkler. The brains in this case is an Arduino Nano 33 IoT, which is the first time I used one of these. In principle, you should be able to use pretty much any microcontroller, but if you want to control it via Wi-Fi, you quite obviously need one with Wi-Fi capabilities. If you want to run my code with only minor modifications, you probably also want to go for the Arduino, but if you do not mind some adaptation, an ESP32 would probably be the cheaper and much more common choice. More information... #projects #arduino #IoT #wifi

13 713

📟 3D printed Smart Chessboard (Play Online or Against Raspberry Pi) Though this board has a great single player mode, If you build two, and bond them together digitally you can then send one to a friend or loved one so you that you can play chess together over the internet with real chess pieces and only a few seconds of delay. Main Features: ▫️ Check your moves are legal and warn you when you don't play by the rules ▫️ Suggest what would be a good next move for you ▫️ Entirely 3D printable including the chess pieces ▫️ Very cool looking LED lighting to convey the game status and provide the lighting for evening games ▫️ Smart control panel which guides you through how to use the board with intelligent backlighting ▫️ Small and low cost OLED screen to help guide you through using it ▫️ Powered by USB, so you can connect it to mains or run it from a common USB battery pack for untethered play More information... #projects #IoT #raspberry #3d_modeling

13 713

💻 Controlling Raspberry Pi Using Matlab This tutorial is about controlling your headless Raspberry Pi using Matlab. You may have to install Matlab to the latest version for support to newer Raspberry Pi board. More information... #projects #control #matlab #raspberry

13 713

🎚 Pinguino 18F4550 Pinguino board, based on Pic18F4550, Programing Arduino and Pic First at all, the Pinguino Project is Open Source which means that We can access the project information from the official website: pinguino.cc We will find a different models of boards, in this case first we need to go to the basic schematic circuit and based on it, we are going to make changes or add additional circuit, but the the basic circuit will always stay. Main features: ▫️ Open Source ▫️ Programmable by his own IDE, Pinguino IDE ▫️ Language of programming : Arduino (Some little changes) ▫️ 28 Digital Outputs ▫️ 5 Analog Inputs ▫️ 2 PWM Outputs ▫️ +5V Power Pin ▫️ +3.3V Power Pin ▫️ Powering by USB or External Source 9-12V More information... #boards #design #electronics

13 713

🎬 Mining Bitcoin With Game Boy + Raspberry Pi Pico It may take a quadrillion years, but a Game Boy can mine. The author has successfully repurposed his old Game Boy to mine Bitcoin. The mod won't turn you into a millionaire overnight, but it does prove that you can teach an old dog new tricks. https://youtu.be/4ckjr9x214c #video #bitcoin #experiments #raspberry #pico

13 713

🗜 DIY Lab Bench Power Supply [Build + Tests] This instructable shows how you can make own variable lab bench power supply which can deliver 30V 6A 180W (10A MAX under the power limit). Minimal current limit 250-300mA. More information... #projects #electronics

13 713

🎚 Firefly unveils Core-3568J AI Core Rockchip RK3568 system-on-module Firefly has unveiled a new 314-pin SO-DIMM system-on-module (SoM) with Core-3568J AI Core powered by Rockchip RK3568 processor and equipped with up to 8GB RAM, 128GB eMMC flash with interfaces including PCIe, SATA, dual Gigabit Ethernet, HDMI 2.0, eDP 1.3, MIPI DSI and more. Specifications: ▫️ Rockchip RK3568 quad-core Cortex-A55 processor @ 2.0 GHz with Arm Mali-G52 2EE GPU ▫️ System Memory – 2GB, 4GB, or 8GB LPDDR4 ECC RAM up to 1600 MHz ▫️ Storage – 32GB, 64GB, or 128GB eMMC flash ▫️ Dimensions – 82.0 x 53.5mm More information... #boards #firefly

13 713

📟 Open Source motion controller for DIY drones [Paweł Spychalski] has developed an open source work-alike motion controller that brings gesture flying to home-built quadcopters and airplanes. Outside of the motion sensing gear, the ESP32-powered peripheral also has a thumb stick and a pair of push buttons nestled into its 3D printed frame. An OLED display provides some user feedback, and a holder for a 18650 cell is mounted to the back side. More information: Project's review Github's page #projects #control #3d_modeling #esp32

13 713

📟 PID Desktop Marble Balancer (Glo Rev 2) The PID controller is one of the first things taught to engineering students and designers. Its simplicity and versatility make it easy to understand and implement. This ball balancer uses the PID feedback loop to balance a marble perfectly on the center of a beam. Additionally, it contains interactive LEDs which gauge the relative position of the marble. It also utilizes one of the most well-known simple machines: the lever. The device is driven by a prototype of Glo Rev 2, a new RGB LED strip controller. The new chip is Wi-Fi compatible, works with Amazon Echo/Google Home, and has plenty of I/O to add modifications. More information... #projects #pid #control