Updates • OnePlus Nord 1

Pro tip of the day.

AxionAOSP v2.8 for OnePlus Nord Details: • Android Version: 16 QPR2 • Status: OFFICIAL • Date: October 14th, 2026 • By: @sreeshankark Changelogs: Source Changelogs: Check Here Device Changelogs:  • Update adreno graphics drivers from hollywood Donate: Check here Features Flashing Instructions @NordUpdates | @TFNord

Project Infinity X 4.0 for OnePlus Nord Details: • Android Version: 17 • Status: OFFICIAL • Date: October 6th, 2026 • By: @sreeshankark Changelogs: Source Changelogs: Check Here Device Changelogs:  • Update Adreno graphics drivers from hollywood (UP1A.231005.007.A1) Donate: BMC | UPI Screenshots Flashing Instructions @NordUpdates | @TFNord

AxionAOSP v2.8 for OnePlus Nord Details: • Android Version: 16 QPR2 • Status: OFFICIAL • Date: October 6th, 2026 • By: @sreeshankark Changelogs: Source Changelogs: Check Here Device Changelogs:  • Switched to pure 64-bit ROM  • Updated media C2 stack and configs from barbet  • Updated WFD vendor stack from salami  • Switched to libperfmgr  • Added Dolby Vision support (up to 4K 60fps)  • Fixed 32.3 MP resolution output in OnePlus Camera  • Added torch control functionality for alert slider Notes:  • 64-bit-only ROM  • Clean flash recommended Donate: Check here Features Flashing Instructions @NordUpdates | @TFNord

Project Infinity 4.0 for OnePlus Nord Details: • Android Version: 17 • Status: OFFICIAL • Date: October 2nd, 2026 • By: @sreeshankark Changelogs: Source Changelogs: Check Here Device Changelogs:  • Update Adreno graphics drivers from hollywood (UP1A.231005.007.A1) Donate: BMC | UPI Screenshots Flashing Instructions @NordUpdates | @TFNord

Lunaris AOSP 3.12 for OnePlus Nord Details: • Android Version: 16 • Status: OFFICIAL • Date: September 5th, 2026 • By: @lostsignal_502 Changelogs:  • Initial Official Support  • Implement Dolby Vision and Dolby Atmos  • Implement GameBar  • Drop Proprietary Firmware Notes:  • OSS based  • GApps build  • SELinux: Enforcing @NordUpdates | @TFNord

Project InfinityX 3.12 for OnePlus Nord Details: • Android Version: 16 • Status: OFFICIAL • Date: August 12th, 2026 • By: @sreeshankar_k Changelogs: Source Changelogs: Check here Device Changelogs: Check here Donate:  • BMC | UPI Screenshots Installation Instructions @NordUpdates | @TFNord

• Issue: Phone panic reboot to recovery with Aftermarket LCD display panels. • Investigation status: Completed • Issue status: Fixed • Error:

[ 121.179299] [20260722_09:56:11.464232]@7 dsi_cmd qcom,mdss-dsi-post-off-command [ 121.184158] [20260722_09:56:11.970085]@0 i2c_geni 984000.i2c: I2C gsi xfer timeout:126 flags:0 addr:0x5d [ 121.984287] [20260722_09:56:12.770199]@0 i2c_geni 984000.i2c: I2C gsi xfer timeout:126 flags:0 addr:0x5d [ 122.260056] [20260722_09:56:13.045983]@0 [TP]touch_interface: touch_i2c_read_block: I2C read over retry limit [ 122.260070] [20260722_09:56:13.046001]@0 [TP]Goodix-gt9886: goodix_u32_trigger_reason: i2c transfer error! [ 122.260077] [20260722_09:56:13.046008]@0 [TP]Goodix-gt9886: error coor data :00 00 00 00 00 00 00 00 00 00 00 00 [ 122.785839] [20260722_09:56:13.571750]@0 i2c_geni 984000.i2c: I2C gsi xfer timeout:126 flags:0 addr:0x5d [ 123.585936] [20260722_09:56:14.371848]@0 i2c_geni 984000.i2c: I2C gsi xfer timeout:126 flags:0 addr:0x5d [ 123.860248] [20260722_09:56:14.646158]@0 [TP]touch_interface: touch_i2c_write_block: I2C write over retry limit [ 123.860291] [20260722_09:56:14.646210]@0 [TP]Goodix-gt9886: I2C write end_cmd error!

Explanation: The Genuine OLED display panel has a separate power regulator for Goodix GT9886 touch IC to make fp sensor, touch gesture, etc. work. It can be powered by PM8150 IC's 2.8V power rail by stepping down the voltage to 1.8V using this separate regulator. In the case of an Aftermarket LCD display panel, this power regulator for touch IC is absent in almost all panels. Therefore when I2C tries to read out the existing command written in the touch IC, erase it and write a command to put the display in sleep mode, the touch IC won't respond, the IC is already dead due to power outage since the display is off (When display is on, 2.8V is pulled from PM8150 IC, no issues in working of touch IC, no crash). The I2C will get an error that the touch IC is not responding, it's dead... The kernel starts panicking. Immediately the phone initiates a panic reboot to recovery. Some of the Aftermarket LCD panels have this separate power regulator for touch IC. Those won't have this issue. In the case of Oxygen OS 12.1, when I dumped the kernel device tree files, I came to know that they are exclusively allowing and providing 1.8V to touch IC constantly. Somehow when these oplus devs released the kernel source, they excluded that 1.8V support for touch IC from the device tree. Also they removed lcd.ko kernel module support from the kernel. So no one will be able to use a custom rom with an LCD display panel. Fix: • Build the lcd.ko module from the kernel source. (Commit) • Enable 1.8V supply for touch IC so I2C can read and write commands. (Commit) Credits: • Thanks to @iamforyou05 for actively testing and providing logs. • Thanks to @abhi_flex1 for giving logs of Oxygen OS 12.1 with the LCD display panel.

Project InfinityX 3.12 for OnePlus Nord Details: • Android Version: 16 • Status: OFFICIAL • Date: July 15th, 2026 • By: @sreeshankar_k Changelogs: Source Changelogs: Check here Device Changelogs: Check here Donate: • BMC | UPI Screenshots Installation Instructions @NordUpdates | @TFNord

Project ASCP 5.5 for OnePlus Nord Details: • Android Version: 16 • Status: OFFICIAL • Date: June 18th, 2026 • By: @KaveerRana Changelogs: Check here Credits: • All thanks to @Sreeshankar_K • Tester: @rayy_qz Donate Screenshots Installation Instructions @NordUpdates | @TFNord

Project Matrixx for OnePlus Nord Details: • Android Version: 16 • Status: OFFICIAL • Date: June 11th, 2026 • By: @KaveerRana Changelogs: Source Changelogs: Check here Device Changelogs: • CFI & LTO enabled kernel • Merge tag 'v4.19.325-cip132-st16' of https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git • Merge latest CLO kernel patches • Merge latest CLO patches for audio, camera, display, gpu and wlan drivers • Update FCM level to 7 • Added System UI restart in advanced reboot menu Notes: • OnePlus Camera included • Sony Dolby included Credits: • All thanks to @Sreeshankar_K • Tester: @rayy_qz Screenshots Installation Instructions @NordUpdates | @TFNord