هندسة اتصالات الكترونيات كهرباء
Открыть в Telegram
القناه الهندسية الوحيدة في الوطن العربي الكترونيات اتصالات كهرباء الكترومكنيكس تحكم صناعي Electronics Communication Electrical Electromechanices
Больше9 993
Подписчики
Нет данных24 часа
+167 дней
+4230 день
Архив постов
Repost from Eng^Electrical
هندسه كهرباء عام:
تخص جميع لغات البرمجه
رابط قناة
https://t.me/+-J4jCG4HBtY0MDY6
كورسات شرح ملفات pdf معلومات
كلشي يخص الذكاء الاصطناعي
كورسات شرح ملفات معلومات
رابط القناه
https://t.me/+WdLSteb2QbVjODMy
كلشي يخص برمجه plc
رابط قناة
https://t.me/+6k1aoZldE9sxNTdi
كورسات ملفاتpdf شرح معلومات
كلشي يخص برمجه C, C++, #C
رابط القناه
https://t.me/+BbdKmY8jqs00ZGY6
كلشي يخص برمجه ماتلاب مهندسين
كورسات شرح ملفات معلومات
رابط قناة
https://t.me/+F0Ix2MzWqtsxZWU6
قنوات خاصه هذا رابط القنوات
وان شاء الله يارب تستفادون
مع تمنياتي للجميع بالموفقية والنجاح
كلشي يخص مكتبه اوفيس
برامج وكورسات تعليم وملفات شرح ومعلومات
رابط قناه
https://t.me/+h1ylZQbp8gE1M2Uy
Repost from Eng^Electrical
اول مره اشرح وانزل شي بصوتي
بس لان كلش يفيدكم وتحتاجونه
طلاب جامعة خريجين ماجستير دكتورا باحثين
كلش هل مواقع تفيدكم احتفضوا بيهن
Rania Rahim 🪿:
1
ieeexplore.ieee.org
2
https://sci-hub.yncjkj.com/
سوو اعاده توجيه للطلاب
Repost from Taiz-Telecom Academy
#5G_Peak_Data_Rate (#Throughput)
▪️#Peak_data_rate is the maximum data rate achieved by a cell (mobile station) in an ideal radio condition, when all the available radio resources are utilized. It is measured in bits per second (bps).
▪️ #Peak_data_rate_formula defined is applicable to both downlink (#DL) and uplink (#UL) transmissions with #TDD and #FDD techniques.
▪️ #Spectrum (#bandwidth) must be used judiciously in conjunction with right number of layers (#MIMO), modulation, parameters with best possible radio conditions on field to achieve the maximum data rates/throughput.
🔹#Note:
▪️ Scaling factors are constant values:
▪️Alpha (DL/UL resource proportion) value is 1 (#FDD) & 0.76 (#TDD).
▪️f (mismatch in BB & RF), it is considered 1 (no mismatch)
▪️ J is number of carriers aggregated. Maximum 16 possible
▪️ Modulation considered: 256QAM
▪️ Coding rate is constant: 0.93
▪️ PRB for FR1:
i). 270 for BW 50 MHz, SCS 15 kHz;
ii). 273 for BW 100 MHz, SCS 30 kHz;
iii). 135 for BW 100 MHz, SCS 60 kHz
▪️ PRB for FR2:
i). 264 for BW 200 MHz, SCS 60 kHz;
ii). 264 for BW 400 MHz, SCS 120 kHz
▪️ #Overhead (#OH): Resources occupied by signaling/guard band: ▪️ In FR1, it ranges from 0.10 to 0.12; In FR2, it is 0.18
▪️ T is the OFDM symbol duration: 10^-3/(14*2^numerology)
▪️ #TDD #DL - frame structure considered is 6D:2U:2F
▪️ #TDD #UL – frame structure considered is 6U:2D:2F
Repost from Taiz-Telecom Academy
7️⃣ #Grounding & #Lightning_Protection
▪️Grounding protects equipment and personnel by safely directing lightning strikes and electrical faults into the earth, reducing the risk of damage.
8️⃣ #Tower_Structure
▪️The tower provides the necessary height and mechanical support for antennas, microwave dishes, and other telecom equipment, enabling wider coverage and better signal quality.
🔹 #Key_Takeaway
▪️A telecom tower is far more than a metal structure. ▪️It is an integrated communication system where every component contributes to delivering reliable voice and high-speed data services.
Repost from Taiz-Telecom Academy
#Telecom_Tower_Architecture ▪️The Foundation of Wireless Communication
▪️Every phone call, video stream, and internet connection relies on a well-designed telecom tower. ▪️While many people only see the steel structure, a telecom tower is actually a combination of several critical systems working together to provide reliable network coverage.
1️⃣ #Antenna_System
▪️The #antenna is mounted at the top of the tower to maximize coverage. ▪️It transmits and receives #RF (#Radio_Frequency) signals for technologies such as 2G, 3G, 4G LTE, and 5G.
2️⃣ #Feeder_System
▪️The feeder system consists of #coaxial_cables or #fiber_optic cables that carry signals between the antennas and the radio equipment. ▪️ High-quality feeders minimize signal loss and improve network performance.
3️⃣ #Radio_Equipment (#RRU/ #RRH)
▪️The #Remote_Radio-Unit (#RRU) is usually installed close to the antenna. ▪️It converts digital signals into radio signals for transmission and receives incoming RF signals from users.
4️⃣ #Baseband_Unit (#BBU)
▪️The# BBU acts as the brain of the base station. ▪️It processes voice and data traffic, manages radio resources, and communicates with the mobile core network.
5️⃣ #Transmission_System
▪️This system connects the tower to the telecom network using #fiber_optics or #microwave_links, ensuring continuous communication between different base stations and the core network.
6️⃣ #Power_System
▪️Reliable power is essential for uninterrupted service. ▪️ The power system includes #AC_power, #rectifiers, #batteries, and backup generators to keep the site operational during power outages.
Repost from Taiz-Telecom Academy
#VoLTE_vs_VoIP ▪️#VoLTE ≠ #VoIP. #Understanding_this_difference can save hours of troubleshooting.
▪️One of the most common misconceptions in telecom is that #VoLTE and #VoIP are the same. ▪️They both carry voice as #IP packets—but their architecture and operational environments are very different.
🔹#VoIP
▪️Voice over any #IP network (Internet, LAN, WAN)
▪️Common protocols: #SIP, #RTP, #SRTP
▪️Used in #IP #PBXs, #SIP Trunks, Contact Centers, and UC platforms
▪️ Call quality depends on latency, jitter, packet loss, and #QoS
🔹#VoLTE
▪️A carrier-grade implementation of #VoIP over the #4G #LTE network
▪️Built on the #IMS (IP Multimedia Subsystem) architecture
▪️Core components include P-CSCF, I-CSCF, S-CSCF, HSS, PCRF, SBC
▪️Provides #HD Voice, faster call setup, and seamless mobility
▪️As a #VoIP Support Engineer, the real challenge isn't making calls—it's troubleshooting them.
🔹#When_a_call_fails_I_start_by_asking:
▪️ Is #SIP signaling completing successfully?
▪️ Is #RTP flowing in both directions?
▪️ Is it a #NAT or Firewall issue?
▪️ Are the correct codecs being negotiated?
▪️ Is packet loss, latency, or jitter affecting audio quality?
▪️ Is the issue related to #DNS, #SIP Registration, or #SIP Trunk configuration?
#Types_of_Telecom_Antennas
▪️Telecom networks rely on different antenna types, each designed for a specific purpose—from delivering 5G coverage to connecting cities with high-speed microwave backhaul links.
🔹#In_this_infographic, #you'll_learn_about:
▪️ #Sector_Antennas – Wide cellular coverage for mobile networks
▪️ #Omni_Antennas – 360° wireless coverage
▪️ #Microwave_Antennas – High-capacity point-to-point backhaul
▪️ #Massive_MIMO_Antennas – The backbone of modern 5G deployments
▪️ #Panel_Antennas – Directional LTE/5G coverage
▪️ #Dish_Antennas – Long-distance microwave communication
▪️ #Small_Cell_Antennas – Boost capacity in dense urban areas
▪️ #Indoor_Antennas – Reliable indoor cellular coverage
▪️ #Yagi_Antennas – Narrow-beam directional RF communication
▪️ #GPS_Antennas – Timing and synchronization for telecom networks
🔹 #Did_you_know?
🔹#Different_antennas aren't interchangeable. The right antenna is selected based on:
▪️ Coverage area
▪️ Frequency band
▪️ Capacity requirements
▪️ Distance
▪️ Environment
▪️ Network technology (2G/3G/4G/5G)
🔹 #Question_for_the#community:
▪️Which antenna is most commonly deployed on 5G cellular towers today?
A) Omni Antenna
B) Sector Antenna
C) Massive MIMO Antenna
D) Yagi Antenna
▪️ Drop your answer in the comments!
Repost from مشاريع التخرج و رسائل ماجستير واطاريح دكتوراه
M.Sc. thesis in Electronic and Communications Engineering
Antenna Designs For Recent Millimeter and THZ Applications
2022
أعتقد أنك تقصد Antenna Calibration (معايرة الهوائيات)، وليس "Celebrations" (يبدو أنه تصحيح تلقائي طريف من الكيبورد! 😅).
في قطاع الاتصالات والشبكات الحديثة (خاصة مع تقنيات 5G و Massive MIMO و أنظمة الـ 8T8R)، تعتبر عملية المعايرة خطوة حاسمة لا غنى عنها. تكمن الفائدة الأساسية منها في النقاط التالية:
### 1. تحقيق دقة توجيه الإشارة (Beamforming Accuracy)
في مصفوفات الهوائيات الحديثة، يتم تركيز الإشارة وتوجيهها نحو مستخدم معين (صنع الحزمة أو الـ Beamforming) عن طريق ضبط الطور (Phase) والسعة (Amplitude) لكل عنصر في الهوائي بدقة متناهية. إذا لم تتم المعايرة، تصبح هذه الأطوار عشوائية وتتشتت الإشارة بدلاً من التركيز على الهدف.
### 2. تقليل التداخل والتشويش (Interference Mitigation)
عندما يتم ضبط العناصر بدقة عبر المعايرة، يتم التحكم في "الفصوص الجانبية" (Side Lobes) للإشارة اللاسلكية. هذا يمنع تسرب الإشعاع اللاسلكي في اتجاهات غير مرغوبة، مما يقلل التشويش على الخلايا المجاورة ويضمن نقاء الطيف الترددي.
### 3. التعويض عن التغيرات البيئية والحرارية (Hardware Compensation)
المكونات الإلكترونية داخل الراديو (مثل مكبرات القدرة RF PAs والفلاتر وكابلات التغذية) تتأثر بالحرارة وعامل الزمن (Aging)، مما يسبب انحرافاً في قيم الطور والتردد. المعايرة المستمرة (Run-time Calibration) تكتشف هذه الانحرافات وتعوضها برمجياً لضمان استقرار الأداء في مختلف الظروف الجوية.
### 4. رفع كفاءة نقل البيانات (Maximizing Throughput)
المعايرة تضمن تطابق اتجاهات الحزم بين الاستقطابات المختلفة للهوائي (Cross-Polarization). عدم توازن الأطوار بين هذه الاستقطابات يتسبب في هبوط كفاءة تقنية الـ MIMO، بينما تضمن المعايرة استغلال كامل السعة العريضة للشبكة والحصول على أقصى Speed ممكنة.
### 5. دقة القياسات (RF & EMC Testing)
في سياق المختبرات وأجهزة الفحص، المعايرة تضمن تحديد "عامل الهوائي" (Antenna Factor) و"الكسب" (Gain) بدقة تامة، لتكون نتائج قياسات الحقل الكهرومغناطيسي موثوقة ومطابقة للمواصفات العالمية.
هل تقصد عملية المعايرة التلقائية التي تتم داخل وحدات الراديو في الموقع (مثل وحدات الـ AAU/RRU)، أم المعايرة التي تتم باستخدام أجهزة القياس في المختبرات؟
