MARKW Update [Redmi 4 Prime]

#crDroidAndroid #Markw #U #Unofficial 🔥Rom: crDroid Android 📱Device : Xiaomi Redmi 4 Prime 📱Codename : Markw 🗓Build Date : 22/12/2023 #️⃣Build version : 10.0 - Vanilla 🤖Android Version : 14.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️Synced latest crDroid Android sources as of 21 december 2023 ▪️Kernel 4.9 - added KernelSU ▪️fixed Atmel 308U TS - DT2W , Atmel 308U TS / FT 5346 TS hw keys vibration feedback (@mkshevetskiy) ▪️changed headset buttons (need test) ▪️december security patch ▪️update audio configs (test) 🔖Note : If you need to turn off KernelSU, we change the value in the cmdline kernel from kernelsu.enabled=1 to kernelsu.enabled=0 #️⃣md5: 67f0956aad20905970ca494396f8cd05 Pling: ▪️ Download ✍️Subscribe to channel

🔥Rom: crDroid Android 📱Device : Xiaomi Redmi 4 Prime 📱Codename : Markw 🗓Build Date : 22/12/2023 #️⃣Build version : 10.0 - Vanilla 🤖Android Version : 14.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️Synced latest crDroid Android sources as of 21 december 2023 ▪️Kernel 4.9 - added KernelSU ▪️fixed Atmel 308U TS - DT2W , Atmel 308U TS / FT 5346 TS hw keys vibration feedback (@mkshevetskiy) ▪️changed headset buttons (need test) ▪️december security patch ▪️update audio configs (test) 🔖Note : If you need to turn off KernelSU, we change the value in the cmdline kernel from kernelsu.enabled=1 to kernelsu.enabled=0 #️⃣md5: 67f0956aad20905970ca494396f8cd05 Pling: ▪️ Download ✍️Subscribe to channel

#crDroidAndroid #Markw #T #Unofficial 🔥Rom: crDroid Android 📱Device : Xiaomi Redmi 4 Prime 📱Codename : Markw 🗓Build Date : 20/12/2023 #️⃣Build version : 9.12 - Vanilla 🤖Android Version : 13.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️Synced latest crDroid Android sources as of 20 december 2023 ▪️Kernel 4.9 - added KernelSU ▪️fixed Atmel 308U TS - DT2W , Atmel 308U TS / FT 5346 TS hw keys vibration feedback (@mkshevetskiy) 🔖Note : If you need to turn off KernelSU, we change the value in the cmdline kernel from kernelsu.enabled=1 to kernelsu.enabled=0 #️⃣md5: 701bcc0e834f83dac1525292d187d472 Pling: ▪️ Download ✍️Subscribe to channel

#Attention #Instructions #markw #DYNPARTS Attention! Before installing firmware (rom) with support for dynamic partitions, read the following annotation/instructions: 1. The dynamic partition scheme differs from the standard scheme familiar to everyone, where there are only “System” and “Vendor” sections, the dynamic partition scheme consists of a common forming section “Super”, which is divided into “System”, “SystemEXT”, “Product”, “ ODM","Vendor". 2. Early firmware (roms) with the standart partitions of the "System" and "Vendor" sections are not compatible with firmware (roms) based on a dynamic scheme, do not try to flash over it even if the firmware is the same but of a different version. 3. Switching to a dynamic partition scheme entails the loss of all data! No old backups made on the basis of a standard partition scheme will help, setting up from scratch, be prepared for this. 4. For firmware (roms) built with a dynamic partition scheme, you need to install a special recovery that supports this scheme; old recovery will not work. In the case of my builds, this is Team Win 3.7.0 12-1 recovery based on kernel 4.19, which is presented here above on the channel. 5. For builds make with a dynamic partition scheme, only those kernels that support this very scheme are suitable (I think they will appear soon). By installation: 1. Download recovery with support for dynamic partitions Team Win 3.7.0 12-1 based on kernel 4.19 (or possible analogues in the future). 2. Download the firmware (rom) built with dynamic partitions. 3. Back up personal data (photos, etc.) to any file storage device if necessary (I wrote about data loss above). 4. Install the recovery via "Fastboot" or through the menu of the old installed recovery, flash the img image from the recovery into the "Recovery" section. Using “Fastboot” via a USB cable, we drop it into the root of the Linux, Windows, macOS system, open the terminal and execute “fastboot flash recovery recovery_name.img” (ignoring the quotes). You must first have all the necessary USB and ADB-Fastboot drivers installed. 5. Copy the downloaded firmware (rom) with dynamic partitions to the SD Card or internal phone memory. 6. Install using a new recovery (during the initial installation, some errors will appear, we ignore this since a normally new partition scheme has not yet been formed). 7. Without rebooting, wipe all partitions except USB-OTG, MicroSD, Internal Storage, and also execute Format Data (the one that asks for YES confirmation) and reboot into the system. Firmware update with dynamic partitions (Retrofit Dynamic Partitions): 1. Reboot into recovery. (We have already performed the operations above, haven’t we?) 2. Flash the firmware (rom). 3. Reboot into the system. Installing another firmware with dynamic partitions (Retrofit Dynamic Partitions): 1. Reboot into recovery. 2. Flash the firmware (rom). 3. We wipe all partitions except USB-OTG, MicroSD, Internal Storage, and also perform Format Data (the one that asks for YES confirmation). 4. Reboot into the system. Return to standard partitions: 1. Reboot into recovery 2. Uncheck the “Settings > Unmount System before installing a ZIP” checkbox. 3. Go to Advanced > Unmap Super Devices. 4. Flash the firmware (rom) with a standard partition scheme. 5. We wipe all partitions except USB-OTG, MicroSD, Internal Storage, and also perform Format Data (the one that asks for YES confirmation). 6. Reboot into the system. In a nutshell, what does this give us (Retrofit Dynamic Partitions): Improved compatibility with GSI - Fans of MIUI and other similar branded firmware (roms) should rejoice, the sections are dynamic in which there are no fixed sizes, each size changes depending on needs automatically, of course within the main “Super” section (its volume).

#crDroidAndroid #Markw #T #Unofficial #DYNPARTS 🔥Rom: crDroid Android 📱Device : Xiaomi Redmi 4 Prime 📱Codename : Markw 🗓Build Date : 17/12/2023 #️⃣Build version : 9.12 - Vanilla - DYNPARTS 🤖Android Version : 13.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️Synced latest crDroid Android sources as of 17 december 2023 ▪️up to version 9.12 ▪️update audio configs (test) ▪️Kernel 4.9 - ram,battery,ts ▪️fixed more selinux rules ▪️changed headset buttons (need test) ▪️december security patch ▪️switch to retrofit dynamic partitions ⚠️Bugs : Atmel 308U TS - DT2W, Atmel 308U TS / FT 5346 TS hw keys vibration feedback (partially) 🔖Note : recovery with support retrofit dynamic partitions #️⃣md5: 7c27beb662767cad84b9ed3435f75ce9 Pling: ▪️ Download ✍️Subscribe to channel

#TWRP #Markw #Q #R #S #L #T #U #Recovery #DYNPARTS 🔥Recovery: Team Win Recovery Project 📱Device : Xiaomi Redmi 4 Prime 📱Codename : markw 🗓Build Date : 17/12/2023 #️⃣Build version : 12-1 🤖Android Version : 10.0-14.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️added retrofit dynamic partitions support #️⃣md5: 6564050e6620e9a5694be1581c188a46 Pling: ▪️ Download ✍️Subscribe to channel

#TWRP #Markw #Q #R #S #L #T #U #Recovery 🔥Recovery: Team Win Recovery Project 📱Device : Xiaomi Redmi 4 Prime 📱Codename : markw 🗓Build Date : 11/12/2023 #️⃣Build version : 12-1 🤖Android Version : 10.0-14.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️Synced latest Team Win Recovery Project sources as of 9 december 2023 ▪️native screen resolution ▪️update some configs by @brigudav source based and more other ▪️changed theme :) #️⃣md5: 66f1e0a5d309c55643df149c8b4e3eda AndroidFileHost: ▪️ Download ✍️Subscribe to channel

#TWRP #Markw #Q #R #S #L #T #U #Recovery 🔥Recovery: Team Win Recovery Project 📱Device : Xiaomi Redmi 4 Prime 📱Codename : markw 🗓Build Date : 18/11/2023 #️⃣Build version : 12-1 🤖Android Version : 10.0-14.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️Synced latest Team Win Recovery Project sources as of 18 november 2023 ▪️add ext4 filesystem besides f2fs #️⃣md5: bdbe82be15d2a0057b5ca77f3bee242b Pling: ▪️ Download ✍️Subscribe to channel

#crDroidAndroid #Markw #T #Unofficial 🔥Rom: crDroid Android 📱Device : Xiaomi Redmi 4 Prime 📱Codename : Markw 🗓Build Date : 15/11/2023 #️⃣Build version : 9.11 - Vanilla 🤖Android Version : 13.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️november security patch ▪️updated Kernel 4.9 - improve ram management,battery ▪️fixed voice calls ▪️up to version 9.11 #️⃣md5: 7c8a4f24fab8c99cb8de9d9e54e7c509 AndroidFileHost: ▪️ Download ✍️Subscribe to channel

#crDroidAndroid #Markw #U #Unofficial 🔥Rom: crDroid Android 📱Device : Xiaomi Redmi 4 Prime 📱Codename : Markw 🗓Build Date : 14/11/2023 #️⃣Build version : 10.0 - BETA - Vanilla 🤖Android Version : 14.0 🤖Kernel Version : 4.9 ⚠️Status : Unofficial 🆑ChangeLog : ▪️initial Android 14 U 4.9 kernel based build #️⃣md5: a4e97d43dd9873f615ca7a80e22fbcb5 Pling: ▪️ Download ✍️Subscribe to channel