اکنون در دسترس! پژوهش تلگرام ۲۰۲۵ — مهمترین بینشهای سال 
API- Ace Petroleum Engineering
رفتن به کانال در Telegram
Initiative by IITians & Experts to guide aspirants for Petroleum Eng. CBT, GATE, SPE, PSUs..etc. & Interviews👔🎯 Website:- gateaceinpetroleumots.conductexam.com/ 📩 apigateinpetroleum@gmail.com ❤️FB-Apiace Est.Dt: 3-07-2019
نمایش بیشتر2 504
مشترکین
-124 ساعت
-87 روز
-2230 روز
آرشیو پست ها
Q- Undersized tubing will result in:
a) Higher wellhead pressure than optimum
b) Higher bottom-hole pressure than optimum
c) Lower bottom-hole pressure than optimum
d) Need more information
Key-seat Wiper can be run between the top drill collar and the bottom joint of
HDWP where there is a problem of _______.
The angle in the horizontal plane measured from a fixed reference direction is
called _______.
________ are heavy and stiff steel tubular which are used at the bottom of a BHA
to provide weight on bit.
Q- Which of the following method is used for heavy crude oil and bitumen
transportation via pipeline?
a) Viscosity reduction method
b) In Situ upgrading method
c) Both (a) and (b)
Q- Which of the following is the main advantage of weir plate used in horizontal
separator?
a) Interfacial (oil-water level) control is easier to operate
b) Relative retention times can be varied easily
c) The cleanest oil is taken off the top
d) All of the above
Q- Lower density cement column generate pressure on the formations which can result in an influx from the formations.
a) Higher
b) Lower
c) Average
d) None of the above
All of the following factors are affecting casing design except:
If the required casing collapse pressure is 11,000 psi, what should be the design
collapse pressure?
📕Detailed topics in PETROLEUM PRODUCTION ENGINEERING -1 for GATE Petroleum Engineering🎯
Q- What is the primary function of the drill collars
a) Transmit the rotation to the drill bit
b) Provide the necessary weight on bit to drill the hole
c) Conduit for mud circulation
d) None of the above
Which of the following is not a type of fixed cutter bits
All of the following are considered the causes of underpressured zones except:
The main purpose of preparing drilling mud during well control situations is to
IIT-Bombay submitted a proposal for installation of these devices in India.
What are these devices called. How does it function.?
Q— Which of the following is true about the relationship between irreducible water saturation and grain size?
A high irreducible water saturation-small grain size
B-high irreducible water saturation large grain size
Math Apti Daily—https://t.me/GATEMATHSAPTI
