AFS CHANNEL

💥 Happy students day

Watch "Lenovo G580 B580 LG4858L UMA MB 12206-1, HACKER CASE STUDY" on YouTube https://youtu.be/Vw94iOjmJoI

Midnight 1.17Am, still under construction, utilizing every minute in AFS PRACTICAL WORKSHOP

💥 New batch practical workshop started

Case study Dell D630 Part no - LA-3301P Problem - board on , amp directly goes to 0.860 then shutdown 👉 Open and clean the board 👉 Replace cpu - but same 👉 Remove Ram and check - but same 👉 Replace 3/5 output capacitor - but same 👉 Then go for Bios - Remove bios chip and check - there is no changes ( means without bios chip board amp same ) 👉 Replace a MX 2mb bios chip and program a new file and check - but still it's same 👉 then I go for impedance check 👉 Found PL42 short (1.8v sus) 👉 Remove PQ92 - but same 👉 Remove PJP49 & PJP48 jumper - but same 👉 Remove PJP47 jumper - 1.8v_sus short gone but jumpers output side short short still present 👉 Trace the line found PU24 ic ( +0.9v vtt ) burned - remove - short cleared 👉 Then found same ic in Dell 07211-3 board - replace it 👉 Connect DC and triger the board Amp step by step increased and finally cross 1.100 💥 Boom Display ok and board run continuesly Sincerely thanks to Rafi Guruji 🙏and the magical game changer AFS DVD 🥰

Case study-13 Dell N5010Laptop No Display with 8 Beeps SomeOne Reflow Graphics Chip I Decide to Do the Conversion On This Board With The Help Of Md.Rafi Sir Conversion Video Without Removing Any Chip Follow That Video Successful Done My First Motherboard Discrite To UMA Done ✅ 👍 Thanks to Md.Rafi Sir for Giving us Wonderful Knowledge and Confidence🔥🔥🔥 Thanks To AFS Family

Case study 004 Part No- Cedar 13269-1 Not Power on 💥DC reading 30 milisecond 0.135amp press power btn nothing happen 💥Open Laptop check physical damage nothing 💥Check impedance all are OK but pl4501 5v standby showing low 46ohm 2digit impedance 💥Check any heating nothing found Isolate pl4501 and inject 2v found U3503 heating removed USB ic and check impedance still same again inject voltage U3505 heating removed it now shorting gone now impedance is OK 3 digit(197) replace both from scrap board 💥Now Connect DC supply DC taking 0.009amp then goes to 0.033amp 💥Check impedance all are OK check voltage standby OK, Ram voltage ok, no 1.05v, and 1.8v 1st check requirements of PU4806 1.05v rt8237c pin7 VCc 5v-s5ok, pin 3 en 3.3v OK, so replace PU4806 💥Connect DC supply DC reading 0.006 goes to 360-460-330 and display came. Confidence level increased thanks Guruji.

Case study-12 HP Laptop LA-C701P Dead DC READING Before Power ON-0.005👍 After Power Button Press DC Reading Goes To 0.074 Check all coil impadance PL8 impadance is Low after Some Time it goes Normal it means Something is Leaking Isolate the 3v and 5v jumper pjp2 and pjp3 Check PU2 RT8243A ALL PINS IMPADANCE IS OK WHEN I ON Dc this Ic Is Heating dc goes to 0.125 Replace this standby ic Connect the jumper again Now DC READING IS 0.005 after pressing Power Button 🔘 No Change in Dc Reprogram The io Done ✅ Thanks To AFS Family

💥 AFS SOLUTIONS YOUTUBE CHANNEL is back 💥 Happy INDEPENDENCE DAY 202Q

💥 Happy INDEPENDENCE day 2021

Viral news 💥 AFS SOLUTIONS YouTube channel hacked & deleted all videos by other institute hackers. Other good institution beware, you may be the next victim. Students be vise in choosing THE RIGHT INSTITUTE TODAY AFS SOLUTIONS IS CERTIFIED AS ONE OF THE BEST INSTITUTE IN INDIA BY HACKING YOUTUBE CHANNEL.

💥 Be ware of fraud, hackers, & jealous people. 💥 On 9th August someone hacked AFS SOLUTIONS Gmail account & deleted complete YOUTUBE channel. 💥 AFS SOLUTIONS has registered a cyber crime complaint yesterday on 10th August for the action is in progress, we have got the IP address & recovery email id, very soon the hacker & from he did this hacking will be behind BARS 💥Deleting all videos of youtube channel means AFS SOLUTIONS is doing good in its work & other INSTITUTE are not able to cheat students. 💥 This is an Alert to other Good institute & the students who are seeking for good knowledge.