Engineering Programs

​​Bridge Layout and Drawing of 𝗕𝗼𝘅 𝗚𝗶𝗿𝗱𝗲𝗿 and 𝗜-𝗚𝗶𝗿𝗱𝗲𝗿 ប្លង់ស្ពានគំរូប្រភេទ Box Girder and I-Girder

[Project 1] Modeling, Analysis, and Design of a 3-Span Continuous PSC I-Girder Using Midas Civil [EP-04]

[Project 1] Modeling, Analysis, and Design of a 3-Span Continuous PSC I-Girder Using Midas Civil [EP-03]

[Project 1] Modeling, Analysis, and Design of a 3-Span Continuous PSC I-Girder Using Midas Civil [EP-02]

[Project 1] Modeling, Analysis, and Design of a 3-Span Continuous PSC I-Girder Using Midas Civil [EP-01]

How to Install midas Civil V22 _________________________ |Telegram | Facebook |YouTube

How to Install midas Civil V2022 (V2022 is the lastest version that it could be cr*cked) _________________________ |Telegram | Facebook |YouTube

3 Methods to Define Deflection of a Simple Beam with Two Supports

🔴 Moving Load, AASHTO (continue) What is Design Truck? The design truck load simulates the effects of a standard heavy truck on the bridge. The design truck is specified with particular axle loads and spacings. In AASHTO, the design truck typically has three axles (The used of design truck is to find the worst-case scenario). What is Tandem? The design tandem load represents two closely spaced axles with equal loads of 110kN with 1.2m distance (The main point of tandem is to ensures the bridge can safely support heavy vehicles with closely spaced axles, which can cause significant stress in certain parts of the bridge deck and girders) What is Lane? The design lane load is a distributed load that represents the effect of multiple vehicles spread out over a lane (traffic flow). (It ensures the bridge can safely support the mixed traffic conditions expected in real-world scenarios) In the design, the load due to moving load is the maximum of the Truck&Lane and Tandem&Lane. _________________________ |Telegram | Facebook |

🔴 Moving Load, AASHTO _____________________ What is Moving Load? Moving Load, it refers to the dynamic action of the vehicle on the bridge structure. In the design according to AASHTO, there 3 main types of loads represent to moving load: ⊕ Design Truck ⊕ Design Tandem ⊕ Design Lane _________________________ |Telegram | Facebook |

📌 𝘽𝙧𝙞𝙙𝙜𝙚 𝘾𝙤𝙢𝙥𝙤𝙣𝙚𝙣𝙩𝙨 These are some of the bridge components🌉 such as 𝐝𝐞𝐜𝐤 𝐬𝐥𝐚𝐛, 𝐠𝐢𝐫𝐝𝐞𝐫, 𝐩𝐢𝐞𝐫 𝐚𝐧𝐝 𝐩𝐢𝐞𝐫 𝐜𝐚𝐩, 𝐩𝐢𝐥𝐞 𝐚𝐧𝐝 𝐩𝐢𝐥𝐞 𝐜𝐚𝐩, 𝐝𝐢𝐚𝐩𝐡𝐫𝐚𝐠𝐦, 𝐛𝐞𝐚𝐫𝐢𝐧𝐠, 𝐩𝐚𝐫𝐚𝐩𝐞𝐭, 𝐛𝐚𝐫𝐫𝐢𝐞𝐫, 𝐚𝐧𝐝 𝐰𝐞𝐚𝐫𝐢𝐧𝐠 𝐬𝐮𝐫𝐟𝐚𝐜𝐞. and other components like Abutment, retaining wall, Approach Slab.... _________________________ |Telegram | Facebook |

📖 Prestressed Concrete Design (ACI318-19) in Khmer, by prof. CHHANG Sophy