O Level Previous paper
Ir al canal en Telegram
https://youtube.com/@Satya806 सभी लोग इस Channel को Subscribe कर लो https://t.me/O_levelpaper Telegram group Quiz 👉https://t.me/o_levelsatya #M4-R5_Paper #M2R5 #O_Level #M3R5_Notes #M1R5Video #PaidClass_O_Level #O_Level_Notes #Satya_Sir
Mostrar más759
Suscriptores
-124 horas
-37 días
-430 días
Archivo de publicaciones
ssc cgl mains Answer key-2023✅
Computer ने बिगाड़ा बहुत से लोगों का Result
☝️☝️☝️☝️☝️☝️☝️
🏁 The quiz 'https://t.me/o_levelsatya. Python test -4' has finished!
40 questions answered
🥇 Amit Bhardwaj – 14 (9 min 30 sec)
🥈 Rao sahab ji 👑👑 ◦•●◉✿K_in_g of a… – 11 (4 min)
🥉 Sona – 2 (1 min 1 sec)
4. Sachin Tiwari – 1 (8 sec)
5. @VIRAT03 – 1 (21.2 sec)
6. FIZA P – 1 (22.6 sec)
7. Vishwas – 1 (53.2 sec)
8. @Pk_058_singh – 1 (1 min 26 sec)
9. @AmanRajput786 – 0 (19.8 sec)
10. @yadavajay1 – 0 (53 sec)
11. Pallavi Rai – 0 (1 min 15 sec)
🏆 Congratulations to the winners!
✡Practical Questions M4-R5 ✡
👉9 feb
Q(1)write a program to interface of fans/lights with arduino board to on/off with the delay of 1 sec.
#define LED_PIN 8
#define BUTTON_PIN 7
void setup() {
pinMode(LED_PIN, OUTPUT);
pinMode(BUTTON_PIN, INPUT);
}
void loop() {
if (digitalRead(BUTTON_PIN) == HIGH) {
digitalWrite(LED_PIN, HIGH);
}
else {
digitalWrite(LED_PIN, LOW);
}
}
Q(2) #include <SoftwareSerial.h>
int relay = 2; // Set pin for relay control
SoftwareSerial bleserial(8,9);
// setup the relay output and the bluetooth serial, and the serial monitor (if you want to print the outputs)
void setup() {
// set relay pin as output.
pinMode(relay, OUTPUT);
// start bluetooth and serial monitor
bleserial.begin(9600);
Serial.begin(9600);
}
void loop() {
if(bleserial.available()){
char char1 = bleserial.read();
Serial.println(char1);
// Set protocol that you want to turn on the light bulb, I chose 1 and 0 as on and off, respectively
if(char1=='1'){
Serial.println("ON");
digitalWrite(relay,LOW);
} else if (char1=='0'){
digitalWrite(relay,HIGH);
}
}
}
#write the program for interfacing temperature sensore(LM35) and relay such that relay is switched in when temperature increases more than 30c.
const int lm35_pin = A1; /* LM35 O/P pin */
void setup() {
Serial.begin(9600);
}
Q(3)
void loop() {
int temp_adc_val;
float temp_val;
temp_adc_val = analogRead(lm35_pin); /* Read Temperature */
temp_val = (temp_adc_val * 4.88); /* Convert adc value to equivalent voltage */
temp_val = (temp_val/10); /* LM35 gives output of 10mv/°C */
Serial.print("Temperature = ");
Serial.print(temp_val);
Serial.print(" Degree Celsius\n");
delay(1000);
}
Er. Deepak
👉Satya sir
https://t.me/o_levelsatya
🏁 The quiz 'Python Set-2 https://t.me/o_levelsatya' has finished!
26 questions answered
🥇 Pallavi Rai – 2 (39.6 sec)
🥈 @Pk_058_singh – 0 (28.4 sec)
🏆 Congratulations to the winners!
🏁 The quiz '✨🌎 𝐂𝐎𝐌𝐏𝐔𝐓𝐄𝐑 𝐐𝐔𝐈𝐙🌎✨ ◆━━━━━━━▣✦▣━━━━━━━━◆ [ टॉपिक 👉 एम एस ऑफिस✨❤️✨ ◆━━━━━━━▣✦▣━━━━━━━━◆'''''''''' has finished!
60 questions answered
🥇 @olevel123 – 50 (9 min 3 sec)
🥈 🦋khushi🦋 – 9 (1 min 57 sec)
🥉 Nitin Kumar – 2 (16.2 sec)
4. ꧁INDIAN ARMY꧂ Tera_Fouji♥♥ – 1 (0.6 sec)
5. Hhimanshi SHarma – 1 (5.3 sec)
6. @iammishravishal0 – 1 (7.7 sec)
7. ARUN PRAJAPATI – 1 (10.9 sec)
🏆 Congratulations to the winners!
🏁 The quiz 'IT Tools and Network Basics' has finished!
50 questions answered
🥇 @olevel123 – 24 (8 min 6 sec)
🥈 Avneesh Raj – 18 (3 min 59 sec)
🥉 Diya Tripathi – 15 (3 min 13 sec)
4. Neha Bajwa – 14 (6 min)
5. satendra Kumar – 9 (1 min 37 sec)
6. 🦋khushi🦋 – 9 (3 min 25 sec)
7. @Pramod45666 – 0 (25.6 sec)
🏆 Congratulations to the winners!
🏁 The quiz 'https://t.me/o_levelsatya' has finished!
26 questions answered
🥇 satendra Kumar – 23 (3 min 22 sec)
🥈 Avneesh Raj – 12 (3 min 18 sec)
🥉 Ashish Kumar – 10 (3 min 7 sec)
4. Diya Tripathi – 1 (11.4 sec)
5. suraj Agrahari – 1 (13.9 sec)
6. Prashant – 1 (23.9 sec)
7. Neha Bajwa – 1 (28 sec)
8. @Pramod45666 – 1 (44 sec)
9. Name me kya rakkha h – 0 (8.7 sec)
🏆 Congratulations to the winners!
