DIGITAL ELECTRONICS PLC

📌20KG Load Cell with Amplifier HX711 ♦️Load Cell Capacity: Up to 20KG (kilograms) ♦️Output Sensitivity: 1.0±0.15mV/V ♦️Amplifier Module: HX711, featuring a 24-bit ADC (Analog to Digital Converter) ♦️Operating Voltage: 2.6V to 5.5V, compatible with most microcontrollers ♦️Dimensions: Compact and easily mountable for various applications ♦️Connector Type: 4-wire load cell with HX711 amplifier (VCC, GND, DT, SCK) ♦️High Precision: Detects weight changes up to 20KG with excellent accuracy ♦️Easy Integration: HX711 provides simple, stable data output compatible with Arduino, Raspberry Pi, and other controllers ♦️Durable Design: Aluminum alloy load cell, resistant to bending ♦️Wide Application Range: Suitable for scales, pressure measurements, and force detection systems ♦️Weight measurement in packing and sorting systems ♦️Force sensing and load monitoring in robotic systems 📌Price 1150Birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌6-30V Relay Module Switch ♦️REVERSE INPUT PROTECTION This timer relay supports reverse input protection and has a "stop" button for emergency stop function ♦️DC 6V~30V DC power supply voltage range from 6V to 30V, support micro USB 5.0V power supply, clear interface, simple, powerful and easy to understand ♦️PARAMETERS ARE SAVED SEPARATELY Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately. In the event of a power failure, all set parameters will be automatically saved ♦️OPTICAL COUPLING ISOLATION FUNCTION With optical coupling isolation function, which improves the anti-interference ability, it is an industrial-grade circuit board ♦️SLEEP MODE A sleep mode has been added. If there is no operation within 5 minutes after being enabled, it will automatically turn off the display, and you can press any button to wake it up 📌Price Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌NFC RFID Reader/Writer Module ♦️NFC (near field Communication), also known as the short-range wireless communication, high frequency wireless communication technology is a short range ♦️Small size ♦️It is easy to integrate into your designs support for I2C, SPI, HSU (high speed UART) ♦️You can easily switch between these communications ♦️Work in NFC Mode or RFID reader/writer Mode (can work in the State of near-field communications, RFID Mifare 1 k, 4 k, ultralight, and DesFire card ♦️ISO / IEC 14443-4 cards, like CD97BX, CD light, Desfire, P5CN072 (SMX) ♦️Innovision Jewel cards, like IRT5001 card ♦️FeliCa cards like RCS_860 and RCS_854 ♦️Plug and Play compatible Council in the antenna, support communication distance 5 cm ~ 7 cm For level shifter, standard 5 V TTL for I2C and UART, 3.3 V TTL for SPI 📌Price Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌RT809F ISP Special Programmer Multi-Function ♦️RT809F ISP Special Programmer Multi-Function ♦️Comes with Multi-Functions ♦️Easy to install ♦️Long lasting ♦️Hardware Interface ‎USB ♦️Compatible Devices ‎Laptop, Mouse, ♦️Desktop, Keyboard, Tablet, Smartphone ♦️Data Link Protocol ‎IEEE 809 ♦️Read and write 8 pin and 16 pins chips those commonly used on computer motherboard, laptop, LCD, routers and home appliances. ♦️Read and write memory SPD DDR1/DDR2/DDR3 Free demolition chip, especially support 34C02 and other special part numbers. ♦️Support laptop 8 pin and 14 pin password chip and battery chip (especially 24RF08/6480AR/BR9080/9016 special part numbers 📌Price 12,000 Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Ethernet Shield Network Expansion Board Module ♦️With this Ethernet Shield, on for Arduino board can be used to connect to internet ♦️Can be used as server or client ♦️Directly plug puzzle board, no soldering required ♦️Controller: W5100. This is the latest version of the Ethernet Shield ♦️It is directly supported by for Arduino official Ethernet Library ♦️It adds a micro-SD card slot, which can be used to store files for serving over the network ♦️It is compatible with for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library ♦️It supports up to four simultaneous socket connections ♦️Use the Ethernet library to write sketches which connect to the internet using the shield ♦️Fits all version of for arduino Main board, 2009, UNO, mega 1280, mega 2560 📌Price Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌LASER TREE Optical Output Power Laser Cutter 80W ♦️80W machine power and real 10W output laser power ♦️Dual compressed spot enabling finer laser engraving 0.08*0.1mm ♦️WITH AIR-ASSISTED: Equipped with "L" type high pressure air-assisted nozzle to improve cutting performance and reduce burn marks. ♦️FAC COMPRESSION TECHNOLOGY: Smaller spot size, better cutting performance and higher engraving accuracy ♦️It can cut 8mm thick plywood at a speed of 1.8mm/s at one time. ♦️PROTECTIVE LENS DESIGN:When the lens is damaged or after long time use, the lens can be disassembled and replaced to restore the cutting ability ♦️WIDE COMPATIBILITY: The laser module has an ingenious and widely compatible structural connection device, which can be well adapted to different brands of laser engraving and cutting machines. Such as ATOMSTACK, ORTUR, NEJE, Sculpfun and so on. 📌Price 40,000 Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Creality Ender-3 V3 Plus 3D Printer ♦️The Creality Ender-3 V3 Plus is the latest high speed printer from Creality ♦️Build Volume: 300 x 300 x 300mm ♦️Max printing speed: 600mm/s (With Creality Hyper PLA) ♦️Vibration Compensation Sensor: Included ♦️Printing Resolution: 0.1mm ♦️Nozzle diameter: 0.4mm (Standard) ♦️Max nozzle temperature: 300 °C ♦️Max heated bed temperature: 110 °C ♦️Printing Surface: PEI Flexible Build Plate ♦️Auto Bed Levelling mode: Auto levelling ♦️Connection mode: Wifi ♦️Compatible file format: STL, OBJ, 3MF ♦️Slicing Software: Creality Print ♦️Power Input: 200-240V AC, 50/60Hz ♦️Rated Power: 350W ♦️Power loss recovery: Yes ♦️Filament runout sensor: Yes ♦️Compatible Filaments: PLA, ABS, PETG, TPU, PLA-CF, PETG-CF, CR-Carbon, ASA ♦️Filament Diameter: 1.75mm ♦️Nett Weight: 11.5kg ♦️Machine size: 410 x 445 x 577mm 📌Price 170,000 Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Neon Light Cutter ♦️[Anti-Slip and Shockproof Handle] Our cutter handle adopts anti-slip and shockproof design, which can reduce hand fatigue and injury, improving efficiency and safety ♦️[High Speed Steel Material] Our neon light cutter is made of premium high speed steel, which has high hardness and wear resistance, preventing deformation and breakage. ♦️[Widely Uses] This neon light cutter is suitable for neon strips, room décor, craft projects and more. You can cut and bend the light strip and the soft silicone strip, then enjoy bright and colorful effects ♦️[Compact and Easy to Store] Our cutter has compact size, about 150mm/5.91in. It is lightweight and easy to store in the toolbox or narrow spaces. ♦️[Straight and Curved Angle Cutter] The package includes 1 straight angle cutter and 1 curved angle cutter. You can cut straight lines and curved lines with these 2 c utters 📌Price 3000 Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Black Wolf Plasma Consumables Nozzle 1.1mm ♦️The electrode nozzle is made of Pickaxe, the air plasma cutting torch tip has high cutting efficiency and is durable to use. ♦️The consumable plasma nozzle features a smooth incision, narrow slit, and small thermal deformation, and is easy to clean the slag. ♦️This plasma nozzle can be a great replacement for the worn one, and they can meet the needs of daily use. ♦️Each cutting nozzle is equipped with an electrode. Specifications: ♦️Material: Pickaxe ♦️Nozzle Aperture: 1.1mm / 0.04inch ♦️Length: 25mm / 0.98inch, 21mm / 0.83inch Package Content: ♦️5 x Plasma Cutting Nozzle Tips ♦️5 x Plasma Cutting Electrode 📌Price 6000 Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌2700KV Brushless Motor ♦️Brushless Motor is commonly used for quadcopters, model planes, model boats and other DIY kits ♦️This specific motor has 5 turns per pole and has a shaft speed of approximately 2700RPM / volt ♦️Generally, this would be used with models weighing 300 – 1000g ♦️Recommended Voltage: 2-12VDC ♦️Internal Resistance: 90mΩ ♦️Shaft Size: 3.17mm (1/8˝) ♦️Shaft Length: 11mm ♦️Assembled Weight: 49g ♦️Motor Diameter: 27.5mm ♦️Motor Length (Overall): 40mm ♦️Max Current: 18.5A/60s ♦️Max Efficiency: 80% ♦️Max Power: 240W ♦️Recommended ESC: 30A ♦️Recommended Model Weight: 300-1000g ♦️Mounting Holes: M3 ♦️Wire Length: ~70mm 📌Price 2500 Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌37 in 1 Sensor Kit ♦️This is ultimate sensor kit of 37 sensor modules is best suited for boards compatible with Arduino. ♦️The 37 in 1 sensor kit is perfect for various DIY projects and robotics science projects. ♦️The sensor kits is compatible with Arduino, Raspberry pi and ither MCU. ♦️The arduino sensor kit can be used by both beginners and professionals. ♦️This is great sensor kit to getting started with microcontrollers. 📌Price Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Price 3500 Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌37 in 1 Sensor Kit ♦️This is ultimate sensor kit of 37 sensor modules is best suited for boards compatible with Arduino. ♦️The 37 in 1 sensor kit is perfect for various DIY projects and robotics science projects. ♦️The sensor kits is compatible with Arduino, Raspberry pi and ither MCU ♦️37 in 1 Sensor Kit Contents: 1. Joy Stick Module 2. Relay Module 3. Big Sound Sensor Module 4. Small Sound Sensor Module 5. Object Tracking Module 6. Obsticle Avoidance Module 7. Flame Sensor Module 8. Linear Hall Sensor Module 9. Touch Sensor Module 10. Digital Temepature Module 11. Buzzer module 12. Passive Buzzer Module 13. RGB Module 📌Price 3500 birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌 150W CO2 Laser tube power Supplly ♦️ Input Voltage AC220V ♦️ AC Frequency 47～440Hz ♦️ Max Output Voltage 34KV ♦️ Max Output Current 38mA ♦️ Dimension 305*161*91mm ♦️ Weight 3.6KG ♦️ Efficiency 91% ♦️ MTBF ≥ 30000 hours ♦️ Response Speed ≤ 1ms ♦️ High-Level ≥ 3V ♦️ Low-Level ≤ 0.7V ♦️ Environment -30° ~ +65° ♦️ Cooling Forced air cooling (fan cooling) ♦️ High Temperature Test Full Load / 60℃ / 12 hours ♦️ Start / Stop Test 500 times 7 seconds 📌 Price 55,000 Birr 📌 Contact    📱0914-83-97-54  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌 Soldering Iron ♦️This soldering iron hand tool is used in soldering electrical components and supplies heat to melt solder so that it can flow into the joint between two work pieces ♦️metal tip to do the soldering work precisely and protect the sensitive components as well ♦️High quality ceramic heating core for fast heating up and long service time. Insulated handle design makes it is safe and comfortable to operate. Specification : ♦️ Soldering Iron Length: 16.5cm ♦️ Working Voltage: 220V-240V ♦️ Power: 60W LED indicator on when the temperature of the Soldering Iron Gun is in the condition of step up ♦️Ideal for hobbies, kits, radios, and electronics work. 📌 Price 850Birr 📌 Contact    📱0914-83-97-54  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Led Flexible Neon Light ♦️comes with 6mm and 8mm thickness ♦️12V LED lights ♦️comes with 10 color option ✨Blue ✨Red ✨Green ✨Yellow ✨White ✨Ice Blue ✨Pink ✨Lemon Yellow ✨Orange ✨Purple 📌Price 650 birr per meter Contact    📱0914-839754  @R0bel            📱09-50-04-49-50 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Water Cooled Spindle Motor 5.5KW ER25 ♦️Size:125x280mm(Middle body diameter:125mmxLength:280mm) ♦️Material:304 stainless steel jacket, water jacket is pressure cast aluminum tubes, high temperature copper coil ♦️Speed Ways:through the inverter output voltage and adjust the operating frequency can be achieved 0-24000 stepless ♦️Cooling:water cooling mode ♦️Power Interface:Optional KC20 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground. ♦️Power:5.5KW ♦️Voltage:220v/380V ♦️Current:19A/15A ♦️Frequency:300/400Hz ♦️Speed:18000-24000rpm ♦️Runout Off:0.01mm ♦️Diameter(mm):125 ♦️Bearing Type:4 pcs bearings ♦️Collet:ER25 ♦️Clip knifediameter:1-20mm,3.175mm,6.35mm,12.7mm ♦️Water Cooling ER25 collet chunk 📌Price Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌7 segment display ♦️Supply voltage: from 1.8 V to 3 V ♦️Current: 0.3 A (3 V) ♦️Character height: 14.22 mm ♦️Segment color: red ♦️Number of segments: 8 (points + characters) ♦️Module dimensions: 12.6 x 19 mm Common anode ♦️Single digit 7 segment display ♦️Model 5161AS ♦️Emitting Color RED ♦️Voltage 1.8V – 1.9V ♦️Wavelength 648nm ♦️Common Cathode 📌Price 100 Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌Ender-PLA Filament ♦️Affordable and Cost Effective for Beginners and great for prototyping Good Compatibility ♦️Simple Operation ♦️Neat Winding, Less Tangle Stable Wire Diameter, No Clogging ♦️Biological Material, Environmental Friendly ♦️Printing Temperature: 200-220℃ ♦️Bed Temperature: 0-70℃ ♦️Recommended Printing Speed: 50 mm/s ♦️Movement Speed: 90-150mm/s 📌Price 6500 birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ

📌20mm Ballscrew Kit ♦️Ball screw diameter: 20mm; Lead / Pitch: 5mm ♦️Total length: 100cm ♦️Nut + BK15/BF15 End supports with locknuts and circlips +Flexible coupler/ Coupling (The coupler bore for the motor shaft is 8mm in default), Precision C7 Grade ♦️Long service life time due to low friction, low operation noise ♦️No stick-slip effect, heats up less, reduce driving power required Small starting torque ♦️able to apply high speed and micro-feeding; High static and dynamic stiffness, high and more accurate positioning 📌Price 25,500 birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ