现已上线！2025 年 Telegram 研究 — 年度关键洞察 
WhatsApp Plus (Official)
前往频道在 Telegram
📈 Telegram 频道 WhatsApp Plus (Official) 的分析概览
频道 WhatsApp Plus (Official) (@waplusapk) 英语 语言赛道中的 是活跃参与者。目前社区聚集了 14 727 名订阅者，在 技术与应用 类别中位列第 8 829。
📊 受众指标与增长动态
自 невідомо 创建以来，项目保持高速增长，吸引了 14 727 名订阅者。
根据 15 六月, 2026 的最新数据，频道保持稳定运转。过去 30 天订阅人数变化为 -444，过去 24 小时变化为 -16，整体触达仍然可观。
- 认证状态： 未认证
- 互动率 (ER)： 平均受众互动率为 7.57%。内容发布后 24 小时内通常能获得 2.95% 的反应，占订阅者总量。
- 帖子覆盖： 每篇帖子平均可获得 1 116 次浏览，首日通常累积 434 次浏览。
- 互动与反馈： 受众积极参与，单帖平均反应数为 1。
📝 描述与内容策略
作者将该频道定位为表达主观观点的平台：
“WhatsApp Plus APK official Channel. Website: gbwhatssapp.com”
凭借高频更新（最新数据采集于 16 六月, 2026），频道始终保持新鲜度与高覆盖。分析显示受众积极互动，使其成为 技术与应用 类别中的关键影响点。
14 727
订阅者
-1624 小时
-1047 天
-44430 天
帖子存档
14 722
Repost from Latest GCam APK
✔️ Guys if you are getting any Error then Please go through our Troubleshooting guide:
👉 https://gcamapk.io/gcam-faqs-and-troubleshooting-tips/
14 722
Repost from Latest GCam APK
📣 MGC_9.7.047_V15 (BSG) (🟢 Updated)
🔥 What's new!!
➡️ Added Shadow Affects Black control for RAW tuning
➡️ New built-in HEX Editor for direct library patching
➡️ Easier HEX value validation with assembly preview
➡️ Improved advanced customization options
➡️ Bug fixes & improved device compatibility
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-97047-V15-Screenshots-06-10
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
📣 MGC_9.7.047_V14 (BSG) (🟢 Updated)
🔥 What's new!!
➡️ Added Google_ID Module & Surface List options
➡️ New JPEG quality control (1–100%)
➡️ Added JPEG resolution scaling (up to 500%)
➡️ Better image customization options
➡️ Bug fixes & improved device compatibility
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-97047-V14-Screenshots-06-07
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
📣 MGC_9.6.080_V34 (BSG) (🟢 Updated)
🔥 What's new!!
➡️A new section "Bento" has been added to the "Additional settings" of the "All modes" module (for all modes) (to activate this mode, you should enable "bento_enabled" in the developer settings).
➡️In the "Additional settings" of the "All modes" module (for all modes), in the "Bento" section, the following items have been added: "Skip Clipping Fallback" (On\Off), "Skip Tiling Fallback" (On\Off), "Process parameter A", "Process parameter B", "Process parameter C (intensity)", "Process parameter D", "UltraShort TET", "Mask Downsample Factor A", "Mask Downsample Factor B", "Scale Halide Buffer By Gain" and "Scale Halide Buffer By Gain B".
➡️Fixed errors found in the modification's operation.
➡️Fixed operation on some devices.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-96080-V34-Screenshots-06-07
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
📣 MGC_9.7.047_V12 (BSG) (🟢 Updated)
🔥 What's new!!
➡️The “Values Range” section has been added to the “RAW Converter and YUV HDR+” section of the module settings.
➡️The following items have been added to the “Values Range” section:
🟢 “Brightness offset” category (increases/decreases each value in the RAW10 buffer by the set value in offset, “Shadow” – adjusts the range 0..341, “Medium” – adjusts the range 342..682, “Light” – adjusts the range 683..1023).
🟢 “CFA offset” category (increases/decreases the value of each color channel in the RAW10 buffer by the set value in offset, – “R”, “Ge”, “Go” and “B”).
🟢 “Lower Value” (minimum value in the RAW10 buffer), “Upper Value” (maximum value in the RAW10 buffer) (everything above “Upper Value” becomes “Upper Value”, everything below “Lower Value” becomes “Lower Value”).
🟢 “All Range Rescale” (when “ON”, all values in the RAW10 buffer are rescaled from the standard RAW10 range (0..1023) to the “Lower Value” and “Upper Value” range; when “OFF”, only the “edges of the range” are clipped).
➡️Fixed errors found in the modification’s operation.
➡️Fixed operation on some devices.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-97047-V12-Screenshots-05-23
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
📣 MGC_9.7.047_V11 (BSG) (🟢 Updated)
🔥 What's new!!
➡️The “RAW Converter and YUV HDR+” section has been added to the module settings (the developer settings items: “raw16_to_raw10_converter_enable”, “raw16_to_raw10_converter_faster”, “yuv_hdrplus_scale_shift” and “yuv_hdrplus_faster” have been moved to this section).
➡️In the module settings, in the “RAW Converter and YUV HDR+” section, the “RAW16(14)(12) Conversion” category has been added, and in it the following items: “Enable Convert”, “White Level for convert”, “Black Level for convert” and “Convert faster”.
➡️In the module settings, in the “RAW Converter and YUV HDR+” section, a “YUV HDRPlus” category has been added, along with the following items: “Scale Shift” and “YUV HDR+ faster”.
➡️Fixed errors found in the modification’s operation.
➡️Fixed operation on some devices.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-97047-V11-Screenshots-05-13
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
✔️ Guys if you are getting any Error then Please go through our Troubleshooting guide:
👉 https://gcamapk.io/gcam-faqs-and-troubleshooting-tips/
14 722
Repost from Latest GCam APK
📣 MGC_9.6.080_V30 (BSG) (🟢 Updated)
🔥 What's new!!
➡️For convenience and to check the correctness of the HEX string input in the “Value (8 charaster)” item in the “Data for editor” section of the HEX editor, the data in the description of this menu item is displayed as an assembly string.
➡️The following items have been added to the “Top Curtain Settings” section of the main modification settings: “Hide front camera flash” (On \ Off), “Hide rear camera flash” (On \ Off), “Hide beautification” (On \ Off), “Hide motion”(On \ Off), “Hide timer” (On \ Off), “Hide aspect ratio” (On \ Off) and “Hide lens selection” (On \ Off).
➡️Fixed errors found in the modification’s operation.
➡️Fixed operation on some devices.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-96080-V30-Screenshots-05-10
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
✔️ Please Follow us on Twitter 🐦
➡️https://x.com/gcamapk
🖥 Also, Download our App for Faster Updates and Guides:
➡️https://play.google.com/store/apps/details?id=com.gcam.guides
14 722
Repost from Latest GCam APK
📣 MGC_9.7.047_V10 (BSG) (🟢 Updated)
🔥 What's new!!
➡️Added the ability to create HDR Plus from YUV format for devices with LIMITED HARD LEVEL modules. (This mode is enabled automatically if the module does not support RAW format.)
➡️Also, in the “RAW format for HDR+” menu, the “RAW_YUV” item has been added to force the HDR Plus mode to be enabled from YUV.
➡️May also need to adjust the following settings:
🟢 “White Level” (if there’s a lot of noise in the photo, increase it; overexposed photo – decrease it; different saturation in Auto and HDRPlus – increase it) in the module settings.
🟢 “Custom Shading Map” (if the photo’s tone is off, adjust the “Color Channel Gains” settings) in the module settings.
🟢 Items in the “Advanced Settings” of the module (in the patcher) in the “Deniose” section.
➡️Fixed errors found in the modification’s operation.
➡️Fixed operation on some devices.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-97047-V10-Screenshots-05-08
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
📣 MGC_9.6.080_V29 (BSG) (🟢 Updated)
🔥 What's new!!
➡️To obtain higher quality photos, the HDR Plus processing algorithm for YUV format has been supplemented with the use of a system shadow map (shading_map) and black level (black_level).
➡️The "yuv_hdrplus_faster" option has been added to the developer settings (when activated: to speed up the HDR Plus processing algorithm from the YUV format, the use of the "shading map" is disabled).
➡️The "yuv_hdrplus_scale_shift" option has been added to the developer settings (increasing the value reduces overexposure and noise in photos).
➡️Added "raw16_to_raw10_converter_faster" to the developer settings (when activated: to speed up the application, conversion is used only in the frame creation algorithms for photo; RAW16 is used in other algorithms).
➡️Fixed errors found in the modification's operation.
➡️Fixed operation on some devices.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-96080-V29-Screenshots-05-08
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
📣 MGC_9.7.047_V7 (BSG) (🟢 Updated)
🔥 What's new!!
➡️Added animation of the process of saving a photo in the “minibar” of the upper curtain.
➡️The following items have been added to the module settings: “Model”, “Preview format”, “RAW format for HDR+”, and “RAW format resolution” (appears on devices with multiple RAW resolutions for selecting the correct resolution).
➡️A “MERGE processor” menu item (“Auto”, “Default”, “SABRE”, “Spatial”) has been added to the module settings (enabled by default; to completely disable it, use “gcam.spatial_merge_processor_enabled” in the developer settings. May not work reliably on some devices).
➡️The item “MERGE” (“Default”, “Wienner merge”, “SABRE merge”, “Spatial Bayer”, “Spatial RGB”, “Auto”) has been added to the module settings — options for merging HDR+ frames, with the “RAW_SENSOR” format ( RAW16) to avoid application crash, MERGE is automatically reset to “Wienner merge” to disable this fix – “camera.disable_merge_fix” in the settings developer.
➡️Fixed errors found in the modification’s operation.
➡️Fixed operation on some devices.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-97047-V7-Screenshots-04-19
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
📣 MGC_9.6.080_V27 (BSG) (🟢 Updated)
🔥 What's new!!
➡️The “raw16_to_raw10_converter_enable” option has been added to the developer settings (recommended for devices without RAW10 format support and devices with non-standard RAW10 (some OnePlus models)).
➡️Fixed errors found in the modification’s operation.
➡️Activating conversion from RAW-SENSOR (RAW16) format to RAW10 format for full functionality of MERGE methods such as “SABRE,” “Spatial Bayer,” and “Spatial RGB,” as well as secondary frame-related algorithms such as “Bento,” etc.
➡️During conversion, the “classic” Android format is created: MIPI CSI-2 RAW10.
➡️To activate the converter on devices that support RAW10 in the Android system, you must additionally set the “RAW format for HDR+” parameter to “RAW16” (if this parameter = “Auto” or “RAW10”, RAW10 from the system will be used, without conversion).
➡️When “raw16_to_raw10_converter_enable” is activated, the merge fix for RAW16 (“merge_fix” – with RAW16 format, the merge method is reset to “WIENNER”) is automatically disabled; reset to WIENNER does not occur.
➡️Fixed operation on some devices.
➡️Fixed errors found in the modification’s operation.
🔗 Screenshots of this Update ➡️https://telegra.ph/MGC-96080-V27-Screenshots-04-19
📌 Download Link ➡️ https://gcamapk.io/download-gcam-apk/
14 722
Repost from Latest GCam APK
🟢 Didn’t know? GCamApk.io works in multiple languages!
🇪🇸 Español ➡️ https://gcamapk.io/es/
🇵🇹 Português ➡️ https://gcamapk.io/pt/
🇮🇩 Bahasa Indonesia ➡️https://gcamapk.io/id/
🇻🇳 Tiếng Việt ➡️https://gcamapk.io/vi/
🇷🇺 Русский ➡️https://gcamapk.io/ru/
🇮🇳 हिन्दी ➡️https://gcamapk.io/hi
🇸🇦 Arabic ➡️https://gcamapk.io/ar/
🇫🇷 Français ➡️https://gcamapk.io/fr/
🇳🇱 Nederlands ➡️ https://gcamapk.io/nl/
🇹🇷 Türkçe ➡️ https://gcamapk.io/tr/
