network tips and learning

Enable routing on the switch with the ip routing command. Switch(config)#ip routing Create Vlans: Switch#vlan database Switch(vlan)#vlan 2 Switch(vlan)#vlan 3 Switch(vlan)#vlan 10 give IP address to Vlans, for example vlan 2: Switch(config)#interface Vlan2 Switch(config-if)#ip address 10.1.2.1 255.255.255.0 Switch(config-if)#no shutdown Configure the interface to the default router. In this scenario you have a Layer 3 FastEthernet port. Switch(config)#interface FastEthernet 0/1 Switch(config-if)#no switchport Switch(config-if)#ip address 200.1.1.1 255.255.255.0 Switch(config-if)#no shutdown Switch(config)#ip route 0.0.0.0 0.0.0.0 200.1.1.2 config client GW to relative vlan IP Address

ram specification

distributed switch will create at datacenter layer in vmware esxi

vmware distributed switch

vswitch , port group

ِِDRS example of recommendation

DRS settings

activate DRS

recommended networks for esxi design

vmotion migration requirement and best practices

what is HA and DRS in vmware vsphere

vmware ha clustering @network_tips

vmotion best practice @network_tips