Auto Forwarder Bot Support

🔉️️ New updates There are new updates to @Auto_Forwarder_Bot and @AutoForwarderHelpBot > Big update for @AutoForwarderHelpBot Now you can purchase long-term plans directly from the bot. You can pay via Razorpay (for Indian customers) and Stripe/PayPal (for customers outside India) Updates to @Auto_Forwarder_Bot: This consisted of mainly bug fixes 1. Album forwarding issues fixed 2. Config, adding and removing of incoming/outgoing chats fixed As always, thanks a lot for your support. Please reach out to me at @yoptgyo_bot for any help

🔉 Update scheduled There will be an update to @Auto_Forwarder_Bot at 12:30 PM UTC (6 PM IST) today. The bot may be down for close to 10 minutes. If you face any issues do not hesitate to reach out to me at @yoptgyo_bot This is a routine maintainance that will enhance the reliability of the forwarding service. This will enable to add many more new features that are coming soon! Boost the channel

I forgot to tell you what was the update. 🙈 👯‍♀️ New feature: User tags 👯‍♀️ Now you can mention the user who posted the message while forwarding by using these tags in your messages: [user.username] -> replaced with the username of the user who posted the message. If it does not exist, then it is skipped [user.id] -> replaced with the telegram user ID of the user who posted the message. You can use [user.username | user.id] to use username if it exists, else switch to user ID. This is supported in /begin_text, /end_text, and in /filter 🐞Bug fix: Album forwarding is more reliable now As always, thanks for your support. Reach out to me at @yoptgyo_bot at any time for help

There is a new update in process. It might introduce a slight downtime

🔉️️️️️️ New Update! 🔉️️️️️️ > This is a major upgrade with lots of improvements and bug fixes specially for Crypto traders 🎉 👯‍♀️ New features 👯‍♀️ 1. Use `{match}` in `/filter` Now you can use {match} to reuse the exact text found in a message. Example: 0x[a-fA-F0-9]{40}==[mono]{match}[/mono] 2. Use `[mono]...[/mono]` for tap-to-copy style text Wrap text like this: [mono]your text[/mono] This is supported in: - /filter replacements - /begin_text - /end_text If the text inside [mono]...[/mono] has multiple lines, it will be shown as a code block. Combined with {match}, you can extract contract address and wrap it in mono to let your users quickly tap to copy the contract address! Improvements and bug fixes 🐞 📷 Album forwarding in forward restricted chats should work without problem now 📝 Editing and deleting syncing will be more reliable now (`/should_edit` and `/should_delete`) 🕐 We noticed the bot getting stuck at a specific time every day - this should not happen now. Contact /support if you face the issue again! ⚡️ All operations should be faster now - means really faster forwarding 🛑 We noticed that for some users forwarding would stop after they purchased premium membership through @AutoForwarderHelpBot. Now this will not happen! 💸 Payments 💸 🍎 Apple Pay now a supported payment method in @AutoForwarderHelpBot

Due to an issue with telegram connections, the bot was not responding to messages for a small set of users. The issue has been resolved now. Thank you for your patience and support 💙

The update has been applied to all the servers now. Restart your forwarding by sending /work and there should be no delay now if you were facing any delay earlier. Please reach out to me at @yoptgyo_bot if you still face delays. Thanks a lot for your support as always 💙

Thanks a lot for connecting with me and for helping me test the solution. I have identified a fix and have scheduled a released. Some of the servers have already received the fix, the rest of them will also get the fix very soon. I will update here once the complete release is done. Thanks a lot for your patience 💙

If you are facing delays in forwarding of 10-15 minutes even if you have not setup any delay, then please reach out to me @yoptgyo_bot I would like a few of you test out a solution. Please message me if you can test and verify it immediately. I want to release it today

The update was successful. 1. Added pagination to the /rem_user command. Previously, you would only see 14 items in the list but now you should see all the items you have added to user filter 2. Better performance 3. Some bug fixes.. As always, reach out to me at @yoptgyo_bot for any issues you face. Thanks a lot for your support 💙

🔉 Update scheduled There will be an update to @Auto_Forwarder_Bot at 1 PM IST (5:30 AM UTC) on 11 Oct 2025. The bot may be down for close to 10 minutes. If you face any issues do not hesitate to reach out to me at @yoptgyo_bot Boost the channel

🔑 The servers were upgraded during the scheduled time. If you are a premium member and still facing delay in message forwarding (except forward restricted media), then please reach out to me at @yoptgyo_bot

I have noticed some delay in forwarding for some of the users. I will be upgrading the premium servers at 1 PM IST on October 10, 2025 so that forwarding remains as fast as it has always been. Thanks a lot for your feedback over the past few days 💙

👯‍♀️ The update was successful. 👯‍♀️ There were a lot of bugfixes 🗼 1. Increased limit for /incoming, /outgoing, /filter, /blacklist, /whitelist for all users, including FREE users. The increased limit for free users is for a limited time. 2. Improved pagination for all the /rem commands - so that it is easy for you to remove filters, blacklists with the enhanced limits. 3. Improved handling of restricted media - so that every media is forwarded without any problems. 4. Better handling of telegram rate limits - so forwarding continues without any problems. And some more... ⚡️Also improved forwarding performance - faster forwarding no matter what settings you use. As usual, if you face any issues or have any suggestions, please reach out to me at @yoptgyo_bot 🔔 Keep this channel unmuted so that you always get the latest updates. 🔔 Update for beta testing I have sent a message to the first batch of selected users - all premium users to try out the beta bot. If you want to be a part of the testing, please /upgrade in @Auto_Forwarder_Bot Thanks a lot for your support ❤️

🔉 Update scheduled There will be an update to @Auto_Forwarder_Bot tomorrow (Sat, 4th October) at 12 PM IST (6:30 AM UTC) The bot may be down for close to 10 minutes. If you face any issues do not hesitate to reach out to me at @yoptgyo_bot

This update has been postponed since I found some issues while releasing. I will instead release a public beta bot that you can use directly before the main bot gets updated. It will be open to everyone. You will be able to use your existing account and migrate everything over to the beta bot. Stay tuned for the release. Thanks again for your support 💙 If you have any issues or feedback, do not hesitate to reach out to me on @yoptgyo_bot

I will release an update to @Auto_Forwarder_Bot at 12 PM IST (06:30 AM UTC) on 13th September, Saturday. This will cause a downtime of about 30 minutes. For any support please reach out to @yoptgyo_bot Unmute this channel to receive the most important updates.

There was an issue with @AutoForwarderHelpBot It is back up now

🔈Bug fixes in @AutoForwarderHelpBot Hi everyone, I have fixed one recurring issue of payments not getting confirmed. Now you should very rarely see that your plan was not added after confirming the payment. 💸 Until now some of the users had to reach out to support to add their plan after the payment was completed. The bug has been fixed now and moving forward we should not see such instances. If you have any issues or feedback, do not hesitate to reach out to me on @yoptgyo_bot