متاح الآن! بحث تيليغرام 2025 — أهم رؤى العام 
DIGITAL ELECTRONICS PLC
الذهاب إلى القناة على Telegram
Contact 0914839754 @R0bel 0950044950 Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.
إظهار المزيد📈 نظرة تحليلية على قناة تيليجرام DIGITAL ELECTRONICS PLC
تُعد قناة DIGITAL ELECTRONICS PLC (@digitalelectronics_tech) في القطاع اللغوي الإنكليزية لاعباً نشطاً. يضم المجتمع حالياً 37 613 مشتركاً، محتلاً المرتبة 3 652 في فئة التكنولوجيات والتطبيقات والمرتبة 882 في منطقة Ethiopia.
📊 مؤشرات الجمهور والحراك
منذ تأسيسه في невідомо، حقق المشروع نمواً سريعاً وجمع 37 613 مشتركاً.
بحسب آخر البيانات بتاريخ 16 يونيو, 2026، تحافظ القناة على نشاط مستقر. خلال آخر 30 يوماً تغيّر عدد الأعضاء بمقدار -1 447، وفي آخر 24 ساعة بمقدار -32، مع بقاء الوصول العام مرتفعاً.
- حالة التحقق: غير موثّقة
- معدل التفاعل (ER): يبلغ متوسط تفاعل الجمهور 2.12%. وخلال أول 24 ساعة من النشر يحصد المحتوى عادةً 0.78% من ردود الفعل نسبةً إلى إجمالي المشتركين.
- وصول المنشورات: يحصل كل منشور على متوسط 798 مشاهدة. وخلال اليوم الأول يجمع عادةً 295 مشاهدة.
- التفاعلات والاستجابة: يتفاعل الجمهور بانتظام؛ متوسط التفاعلات لكل منشور يبلغ 2.
- الاهتمامات الموضوعية: يركز المحتوى على مواضيع رئيسية مثل ህንፃ፡, መንፈሳዊ, ስላሴ, ቅድስት, ኣድራሻችን፡.
📝 الوصف وسياسة المحتوى
يصف المؤلف القناة بأنها مساحة للتعبير عن الآراء الذاتية:
“Contact 0914839754 @R0bel
0950044950
Are you looking for Electrical and Mechanical items for your projects. Then you are in the right place to get Microcontrollers, Sensors, Motors...so what are you waiting for join now.”
بفضل وتيرة التحديث المرتفعة (أحدث البيانات بتاريخ 17 يونيو, 2026) تحافظ القناة على حداثتها ومستوى وصول مرتفع. وتُظهر التحليلات تفاعلاً نشطاً من الجمهور، ما يجعلها نقطة تأثير مهمة ضمن فئة التكنولوجيات والتطبيقات.
37 613
المشتركون
-3224 ساعات
-2917 أيام
-1 44730 أيام
أرشيف المشاركات
37 592
+3
📌Digital Voltmeter Ammeter DC 100V 10A Amp Voltage Current Meter Tester Blue + Red Dual LED Display Panel with Connect Wires
♦️Working voltage of Meter: DC 4 – 30V
♦️Working current of Meter: less than equal 20mA
♦️Voltage Measuring range: DC 0 – 100V
♦️Current Measuring range: DC 0 – 10A
♦️Working voltage of Meter: DC 4 – 30V
♦️Working current of Meter: less than equal 20mA
♦️Voltage Measuring range: DC 0 – 100V
♦️Current Measuring range: DC 0 – 10A
♦️Voltage resolution (V): 0.1V
♦️Current resolution (A): 0.01A
♦️Measure accuracy: 1% (± 1 digit)
♦️Display: 0.28inch digital tube, Two color blue and red
♦️Refresh rate: about 300mS / times
♦️Dimensions: 48mmx29mmx21mm
♦️Operation Temp: -10°-+65°
♦️The maximum input voltage can not exceed 30V. Otherwise the meter will be burned out.
📌Price 1250
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
🌐https://digitalelectronics.tech/
37 592
+3
📌L293D Motor Driver Shield
♦️L293D is a monolithic integrated, high voltage, high current, 4-channel driver
♦️2 interface for 5V Servo connected to For Ardui-no’s high-resolution dedicated timer – no jitter!
♦️Can drive 4 DC motors or 2 stepper motors or 2 Servo
♦️Up to 4 bi-directional DC motors with individual 8-bit speed selection
♦️Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
♦️4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
♦️Pull down resistors keep motors disabled during power-up
♦️reset button
♦️2 external terminal power interface, for seperate logic/motor supplies
♦️Tested compatible for Ardui-no Mega, Diecimila & Duemilanove
37 592
📌ARDUINO UNO STARTER KIT
♦️Arduino Uno with cable
♦️Full-size Breadboard
♦️9V Battery Plug
♦️Jumper Wires
♦️Potentiometer
♦️Push Button
♦️5V Active Buzzer
♦️Resistor Set
♦️LED Assortment (Red / Green / Yellow)
♦️RGB LED Module
♦️16x2 LCD Display with I2C Backpack
Single Digit 7-Segment Display
♦️4-Digit 7-Segment Display
♦️8x8 Dot Matrix Display
♦️DHT11 Temperature & Humidity Sensor
♦️DS18B20 Waterproof Temperature Sensor
♦️Ultrasonic Distance Sensor (HC-SR04)
♦️Water Level / Rain Sensor
♦️Sound Detection Sensor
♦️Joystick Module
♦️LDR (Light Dependent Resistor)
♦️Infrared Receiver
♦️IR LED + Photodiode Pair
♦️RFID RC522 Module with Tag & Key Fob
♦️Real Time Clock Module
♦️4×4 Matrix Keypad
♦️One-Channel 5V Relay Module
♦️IR Remote Controller
♦️Stepper Motor with ULN2003 Driver
♦️SG90 Micro Servo Motor
♦️Arduino IDE
♦️Kit Storage Box
📌Price 8500
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
🌐https://digitalelectronics.tech/
37 592
+1
📌ARDUINO UNO STARTER KIT
♦️Arduino Uno with USB programming cable
♦️Full-size Breadboard
♦️9V Battery Plug
♦️Jumper Wires (Male–Male / Male–Female / Female–Female)
♦️Potentiometer
♦️Push Button
♦️5V Active Buzzer
♦️Resistor Set
♦️LED Assortment (Red / Green / Yellow)
♦️RGB LED Module
♦️16x2 LCD Display with I2C Backpack
Single Digit 7-Segment Display
♦️4-Digit 7-Segment Display
♦️8x8 Dot Matrix Display
♦️DHT11 Temperature & Humidity Sensor
♦️DS18B20 Waterproof Temperature Sensor
♦️Ultrasonic Distance Sensor (HC-SR04)
♦️Water Level / Rain Sensor
♦️Sound Detection Sensor
♦️Joystick Module
♦️LDR (Light Dependent Resistor)
♦️Infrared Receiver
♦️IR LED + Photodiode Pair
♦️RFID RC522 Module with Tag & Key Fob
♦️Real Time Clock Module (RTC)
♦️4×4 Matrix Keypad
Shift Register
♦️One-Channel 5V Relay Module
♦️IR Remote Controller
♦️Stepper Motor with ULN2003 Driver Board
♦️SG90 Micro Servo Motor
♦️Arduino IDE (Soft Copy)
♦️Arduino Projects Book (Soft Copy)
♦️Kit Storage Box
37 592
📌ARDUINO UNO STARTER KIT
♦️Arduino Uno with USB programming cable
♦️Full-size Breadboard
♦️9V Battery Plug
♦️Jumper Wires (Male–Male / Male–Female / Female–Female)
♦️Potentiometer
♦️Push Button
♦️5V Active Buzzer
♦️Resistor Set
♦️LED Assortment (Red / Green / Yellow)
♦️RGB LED Module
♦️16x2 LCD Display with I2C Backpack
Single Digit 7-Segment Display
♦️4-Digit 7-Segment Display
♦️8x8 Dot Matrix Display
♦️DHT11 Temperature & Humidity Sensor
♦️DS18B20 Waterproof Temperature Sensor
♦️Ultrasonic Distance Sensor (HC-SR04)
♦️Water Level / Rain Sensor
♦️Sound Detection Sensor
♦️Joystick Module
♦️LDR (Light Dependent Resistor)
♦️Infrared Receiver
♦️IR LED + Photodiode Pair
♦️RFID RC522 Module with Tag & Key Fob
♦️Real Time Clock Module (RTC)
♦️4×4 Matrix Keypad
Shift Register
♦️One-Channel 5V Relay Module
♦️IR Remote Controller
♦️Stepper Motor with ULN2003 Driver Board
♦️SG90 Micro Servo Motor
♦️Arduino IDE (Soft Copy)
♦️Arduino Projects Book (Soft Copy)
♦️Kit Storage Box
37 592
🚀 Digital Electronics proudly offers top-notch 3D printing services for students, creators, and professionals! Whether you need a custom prototype, 3D design assistance, or high-quality printer parts, we’ve got you covered.
Our services include:
✅ 3D Printer Machines
✅ Professional 3D Printing Service
✅ Free Prototype & 3D Design Support
✅ 3D Printer Parts & Components
🎓 Exclusive Student Discounts available!
Turn your ideas into reality with precision and innovation.
📞 Contact us today:
📱 09-14-83-97-54 | 09-50-04-49-50
🌐 www.digitalelectronics.tech
💬 Telegram & Instagram: @digitalelectronics_tech
37 592
📌Creality Ender-3 V3 Plus 3D Printer
♦️The Creality Ender-3 V3 Plus is the latest high speed printer from Creality
♦️Build Volume: 300 x 300 x 300mm
♦️Max printing speed: 600mm/s (With Creality Hyper PLA)
♦️Vibration Compensation Sensor: Included
♦️Printing Resolution: 0.1mm
♦️Nozzle diameter: 0.4mm (Standard)
♦️Max nozzle temperature: 300 °C
♦️Max heated bed temperature: 110 °C
♦️Printing Surface: PEI Flexible Build Plate
♦️Auto Bed Levelling mode: Auto levelling
♦️Connection mode: Wifi
♦️Compatible file format: STL, OBJ, 3MF
♦️Slicing Software: Creality Print
♦️Power Input: 200-240V AC, 50/60Hz
♦️Rated Power: 350W
♦️Power loss recovery: Yes
♦️Filament runout sensor: Yes
♦️Compatible Filaments: PLA, ABS, PETG, TPU, PLA-CF, PETG-CF, CR-Carbon, ASA
♦️Filament Diameter: 1.75mm
♦️Nett Weight: 11.5kg
♦️Machine size: 410 x 445 x 577mm
📌Price 195,000
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103ለ
37 592
+3
📌Ethernet Shield for Arduino
♦️Ethernet Controller: Wiznet W5100 with a 16K buffer
♦️Supported Protocols: TCP/IP and UDP
♦️Maximum Socket Connections: Up to 4 simultaneous socket connections
♦️Connection Speed: 10/100 Mbps
♦️Power: 5V, supplied by the Arduino board
♦️Communication with Arduino: SPI port
♦️Micro-SD Card Slot: Included on most newer versions for file storage
♦️Physical Connection: Long wire-wrap headers to maintain the Arduino pin layout and allow for stacking other shields
♦️Board Compatibility: Compatible with Arduino boards like the Uno, Duemilanove, and Mega (with an updated Ethernet library).
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+4
📌NEMA 23 stepper motor
🚀 Electrical Specifications
♦️ Current per Phase: 2.8 A
♦️ Recommended Voltage: 24 V – 48 V DC
♦️ Phase Resistance: 1.2 Ω
♦️ Phase Inductance: 4.2 mH
🚀 Mechanical Specifications
♦️ Step Angle: 1.8°
♦️ Holding Torque: 2.1 Nm (21 kg·cm)
♦️ Body Dimensions: 67 mm (length) × 60 mm (width)
♦️ Mounting Hole Pattern: 51 mm × 51 mm
♦️ Shaft Diameter: 8 mm
♦️ Shaft Length: 23 mm (without pulley)
♦️ Weight: 1.2 kg
37 592
+3
📌ESP32-CAM
♦️Processor: ESP32-D0WD dual-core, 32-bit, up to 240 MHz
♦️Memory: 512KB SRAM + 4MB PSRAM (or 8MB PSRAM on some models) + 32Mbit SPI Flash
♦️Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz
♦️Bluetooth: 4.2 BR/EDR and BLE
♦️Camera: OV2640 2MP camera (or other compatible cameras)
Image Output: JPEG (OV2640 support only), BMP, GRAYSCALE
♦️External Storage: microSD card slot, supports up to 4GB (and potentially larger cards)
♦️Power Supply: 4.75V to 5.25V (4MB model) or 5V pin (various models)
♦️Interfaces: UART, SPI, I2C, PWM
♦️GPIO Pins: 9 available GPIO ports
♦️UART Baud Rate: Default 115200 bps
♦️Antenna: Onboard PCB antenna
37 592
+3
♦️Voltage: 12V DC
♦️Operation: Normally Closed (NC)
♦️Port Size: Varies (e.g., 1/8", 1/4", 1/2")
♦️Power Consumption: 4–8 Watts
♦️Rated Current: 0.6A–1A
♦️Fluid Compatibility: Air, water, gas, oil
♦️Max Fluid Temperature: Typically around 100°C, though some may be lower
♦️Response Time: Typically under 50 ms
♦️Body Material: Aluminum or Brass
♦️Seal Material: NBR (Buna N)
♦️Action Type: Direct Acting
♦️Service Life: Can be 50,000+ cycles, but depends on operating conditions
📌Price 1750
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+4
📌Camera Module OV7670 CMOS VGA
♦️Mounted with high quality F1.8 / 6mm lens
♦️High sensitivity for low-light operation
♦️Low operating voltage for embedded application
♦️Standard SCCB interface compatible with I2C interface
♦️8bit Output Format (YUV/ YCbCr 4:2:2/RGB565-555-444/RAW RGB Data)
♦️Serial Camera Control Bus (SCCB)
♦️Support VGA, CIF and from CIF to 40 x 30 format
♦️Auto Image Control: AEC, AGC, AWB, ABF, ABLC
♦️ISP includes noise reduction and defect correction
♦️Flicker 50/60Hz auto detection
♦️Color saturation level auto adjust
♦️Edge enhancement level auto adjust
♦️De-noise level auto adjust
♦️Resolution 640×480 VGA
♦️Optical size: 1/6 inch
♦️Vision Angle: 25 degree.
♦️Max. Frame Rate: 30fps VGA.
♦️Sensitivity: 1.3V / (Lux-sec).
♦️Working Voltage: DC 3.3V with onboard regulator
♦️Operating Power: 60mW/15fps
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+3
📌11.1V 3S 60C 3300mAh Li-Po battery
♦️Voltage: 11.1V
♦️Configuration: 3S1P (3 cells in series)Capacity: 3300mAhDischarge Rate: 60C (continuous)Maximum Discharge Rate: ♦️Typically higher, often around 80C or moreFully Charged Voltage: \(12.6V\) (4.2V per cell)Discharge
♦️Cutoff Voltage: 9.0V (3.0V per cell)
rechargeable lithium polymer battery designed for RC drones
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+3
📌11.1V 2200mAh Lipo Battery
♦️Battery Type: Lithium Polymer (LiPo)
♦️Voltage: 11.1V (3S)
♦️Capacity: 2200mAh
♦️Discharge Rate: Varies by model, commonly 25C, 30C, or 35C
♦️Rechargeable: Yes
♦️Configuration: 3S1P
♦️Dimensions: Approximately 97mm x 48.9mm x 27.0mm
♦️Plug Type: Varies (e.g., Deans T, XT60, JST)
♦️Application: RC drones, quadcopters, cars, and airplanes
📌Price
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+3
📌PH Sensor Module
♦️Power Supply: Typically 5VDC, though some may vary.
♦️Operating Current: 5-10mA.
♦️pH Measurement Range: 0-14 pH.
♦️Temperature Measurement Range: 0-60°C is common for the probe, while the module has its own operating temperature range (e.g., -10 to 50°C).
♦️Output Signal: Analog, typically converting pH to a voltage signal (e.g., 0.5V to 3V).
♦️Probe Connector: Standard BNC socket.
♦️Module Features: Often includes a gain adjustment potentiometer, LED power indicator, and 2.54mm pitch header pins.
37 592
+3
📌DHT22 Temperature and humidity sensor
♦️Operating Voltage: 3.5V to 5.5V
♦️Operating current: 0.3mA (measuring) 60uA (standby)
♦️Output: Serial data
♦️Temperature Range: -40°C to 80°C
♦️Humidity Range: 0% to 100%
♦️Resolution: Temperature and Humidity both are 16-bit
♦️Accuracy: ±0.5°C and ±1%
♦️Measure temperature and humidity
♦️Local Weather station
♦️Automatic climate control
♦️Environment monitoring
📌Price 950
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
37 592
+3
📌DHT11–Temperature and Humidity Sensor
♦️Operating Voltage: 3.3V to 5.5V
♦️Interface: Single-wire digital interface
♦️Power Consumption: 2.5mA max during conversion, 0.5mA during standby
♦️Dimensions: 15.5mm x 12mm x 5.5mm
♦️Sampling Rate: 1 Hz (1 reading per second)
♦️Factory Calibrated: The sensor is factory calibrated, so no extra calibration is needed.
♦️Single-Wire Interface: Communication is done over a single data wire, simplifying wiring with microcontrollers.
♦️Internal Components: It uses a resistive-type humidity measurement component and an NTC thermistor for temperature measurement, with an 8-bit microcontroller inside to process the signals.
37 592
🚀 Digital Electronics proudly offers top-notch 3D printing services for students, creators, and professionals! Whether you need a custom prototype, 3D design assistance, or high-quality printer parts, we’ve got you covered.
Our services include:
✅ 3D Printer Machines
✅ Professional 3D Printing Service
✅ Free Prototype & 3D Design Support
✅ 3D Printer Parts & Components
🎓 Exclusive Student Discounts available!
Turn your ideas into reality with precision and innovation.
📞 Contact us today:
📱 09-14-83-97-54 | 09-50-04-49-50
🌐 www.digitalelectronics.tech
💬 Telegram & Instagram: @digitalelectronics_tech
37 592
+3
📌Water Level Sensor Plastic Float Switch
♦️Water Level Sensor Plastic Float Switch is a type of level sensor, a device used to detect the level of liquid within a tank. It is neither a complicated circuit nor does it provide power
♦️It is a simple structure, easy to use level control device; furthermore, this switch has a mechanical switch than those of the average small sized switches.
♦️As long as the material used is in the correct shape and nature of any liquid or pressure, you can control the temperature
♦️Applications of this Switch include shipbuilding industry, generating equipment
♦️Max. Contact Rating 10 W
♦️Max. Switching Voltage 220 V
♦️Max Switching Current:0.5A
♦️Max Breakdown Voltage:220VDC
♦️Max Carry Current:1.0A
♦️Max Contact Resistance:100mohm
♦️Temperature Rating:-10~+60
📌Price 700
Contact 📱0914-839754 @R0bel
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.tech/
