BNT Release Hub

#bannatar #23 #xml #config #AGC #UltraHDR

CHANGELOG v23

▪️APK File ▪️Comparisons ▪️Support ▪️Guide to setup ▪️IMPORTANT ▪️Last Update's Changelog • Tuned Sabre Max Scale Factor to 30.0 in order to add definition.• Decrease warmness factor to *0.2 in BNT.TRUE • Enable AWB and switched model to Nubia Z5OU Tele OV64B in BNT.TRUE. • Tuned Luma Denoise Level factors to offset noise. • Swiched CCT colour transform to a more accurate model. --------------------------------------------------

You wanted a comparison, here it is:

#bannatar #22 #xml #config #AGC #UltraHDR

LINK-HOW TO USE: https://t.me/pocof5photography/120858

CHANGELOG FROM LAST UPDATE

CHANGELOG v22

• Slightly faster capture due to changes in burst in dev settings. Even if it seems that it takes a lot of time taking the photo, it's not, it's just processing lag after the burst. • Enhanced details due to rework of Sabre Noise Tunning and Main tunning factor parameters in patcher -noise reduction is actually better now, even with more detail. • Switch CCTcolour transform model in TRUE profile. • Enable Postprocessing sharpness tunning factor to *0.1* in all three main camera profiles. • Contrast and Black Contrast, together with Dehaze Regulator#2 are now tuned to: *56,54*1.00, 1.00* in TRUE & WARM modes in main camera lens. • Added Postprocessing vignette factor to *0.98* in VINTG profile. • Contrast in VINTG mode is now set to *3.30*. • Disable "camera.ddepth_rear" and "camera.ddepth rear use opencl" variables in dev settings as they were causing problems in photo edge processing.

- There is no EIS available on video. Only OIS works for the moment (ximi stuff).

- To keep it simple, there are 3 profiles in the main lens and 2 profiles on the front camera, WARM, TRUE and VINTG.

- Selfie photos output in 15.9mp Ultra HDR -detailed, nice warm colours and noise is very controlled as well.

-Main camera outputs in Ultra HDR + 27mp.

- Check the profile tab when switching lenses to see if they are loaded right. To distinguish the front from the back cam the front profiles have a "-Front" suffix.

- It's recommended to switch to TRUE mode in low light to achieve good colour performance.

- Photo output is now btw 8-15mb in size in order to maintain picture quality.

----------------------------------------------------------------------------------------

#bannatar #21 #xml #config #AGC #UltraHDR

CHANGELOG v21

-->HOW TO USE (CLICK)

• Enhanced details due to rework of Sabre Noise Tunning and Main tunning factor parameters in patcher -noise reduction is actually better now, even with more detail. • Slightly faster capture due to changes in burst in dev settings. • Switch CCTcolour transform model in TRUE profile. • Enable Postprocessing sharpness tunning factor to *0.1* in all three main camera profiles. • Contrast and Black Contrast, together with Dehaze Regulator#2 are now tuned to: *56,54*1.10, 1.125* in TRUE & WARM modes. • Added Postprocessing vignette factor to *0.98* in VINTG profile. • Contrast in VINTG mode is now set to *3.30*. • Disable "camera.ddepth_rear" and "camera.ddepth rear use opencl" variables in dev settings as they were causing problems in photo edge processing.

CHANGELOG FROM LAST UPDATE

• Nuke external noise tuning model file using instead one included. • Reworked completely config over a different noise tuning model as a lot of people where having problems with it. Thanks for the feedback. • Tuned details a lot for extra detail in night lightning at expense of noise. • Disable Shasta Bracketing x5 as it was giving too much extra brightness to subject. • Misc adjustments and changes in sabre section and luma noise parameters.

- There is no EIS available on video. Only OIS works for the moment (ximi stuff).

- To keep it simple, there are 3 profiles in the main lens and 2 profiles on the front camera, WARM, TRUE and VINTG.

- Selfie photos output in 15.9Mp Ultra HDR -detailed, nice warm colours and noise is very controlled as well.

- Check the profile tab when switching lenses to see if they are loaded right. To distinguish the front from the back cam the front profiles have a "-Front" suffix.

- It's recommended to switch to TRUE mode in low light to achieve good colour performance.

- Photo output is now btw 8-15mb in size in order to maintain picture quality.

----------------------------------------------------------------------------------------