Mechanical Design Jobs

We have an opening for a Design Engineer (Mechanical)... Designation: Design Engineer Experience: 3-5 Years Software: Creo/Solidworks/Unigraphix Notice Period: Immediate to 1 month Location: Pune Mandatory Skills: 1. Experience hands-on software tool- Creo 2. Sheetmetal, Fabrication and piping domains are preferred. 3. Preparing 2D development drawings using proper GD&T. 4. Knowledge of the Manufacturing process. 5. Good verbal and written communication skills. Interested candidates, kindly share your CV below mail- careers@shivamtech.com

Greetings!! We have job opening for Design Engineer (R&D) Position: Design Engineer / Sr. Design Engineer Department - R&D Location: Udyog Vihar Phase 1, Gurugram, Haryana 122016 No. of Working Days: 5 / Week Education: Mechanical Engineering (B.Tech ) / Diploma in ME JOB DESCRIPTION: 1.Good Knowledge of Catia V5 Plastic Design. 2.Experience in Plastic Design with GD&T. 3.Knowledge of BOM Management and Benchmarking Activity etc. 4.Knowledge of Injection Molding Process. Interested candidates may share their resume with the subject line "Design Engineer“ at abhishek.kumar@sogefigroup.com.

We #Expleo, a leading global engineering and quality services company, are currently seeking a #Graduate #Design #Engineer role in #Bangalore For #Aerospace Domain Walk-in Drive (13th & 14th May 2023 10:00AM TO 01:00 PM) at #Expleo #Bangalore for #Mechnical #Fresher 2022 & 2021 Pass out with Minimum 65% Above Skill Required #Catia #Catiav5 Thank you for your interest in #Expleo, and we look forward to hearing from you soon. Best regards, Surender PS surender.pasupulite@expleogroup.com

We #tatatechnologies are looking for CAD Engineer for Pune location. Kindly share your Profile with Sharyu.Nimkar@tatatechnologies.com if your profile matches with the below mentioned JD- Domain: Assembly Process (TCF & Gear box) Role: CAD Engineer Location: Pimpri, Pune Experience: 1-3 Years Education: B.E/ B.Tech Grade: L1.1 Designation- Design Engineer Job Description Ø Domain: Assembly Process (TCF & Gear box). Ø Experience in creating Assembly process sequence for new product by taking the reference of base vehicle. Ø Process Documentation- Process Flow chart (PFC), SOP, Process Sheet etc. Ø Should have good knowledge of Gear Box Manufacturing process. Ø Understanding of manual Transmission sub system Gear box, Gear shift Mechanism and Synchromesh system. Ø Good Knowledge of selection of torque tool for assembly line and Gear box line. Ø Checking product process with existing facility & identify facility requirements for new product, predominantly focus on critical processes/stations at parts build stages at virtual stage to avoid an actual build issues. Ø PLM Activity – Uploading & Check-In of Resource parts of Assembly Line in PLM. Ø Good knowledge in IE Standard such as time study, work study with factory exposure. Ø Process Improvement whenever possible. Ø Good English Communication skill both Verbal & Written. This role will include Vehicle & Gear box Assembly Process Knowledge, Skill and able to Process Documentation – process sheet development and modification. Apart from this, need to Good Knowledge about industrial engineering concept. Software Skills Requirement: -Team Centre visualization -PLM -AutoCAD -CATIA V5 -PRO-E / Creo

We at Krishna Maruti Ltd, Narsinghpur Gurgaon Welcomes the Diploma Technical Institutes/Colleges who are at present offering Diplomas in Mechanical, Automobile, Production & Chemical branches. TPOs can contact me to get their students placed in Maruti Suzuki's Joint Venture Batch should be considered Appearing (22-23) & Passouts (2021 onwards) Nishant - 9718875172 Email - nishantsingh@krishnamaruti.in

We are looking candidates for #Machine_Shop!! #Position: Setter - Induction Hardening #Department: Machine Shop #Experience: 5+ Years #Qualification: Diploma/ITI or having similar experience can apply #Number_of_requirements: 02 #Job_Location: Baddi - Himachal Pradesh (40KM Ahead from Chandigarh) Interested candidates can drop CV at recruitment@emmforce.com

We #tatatechnologies are looking for Sr. Design Engineer in Packaging-E&E Integration for Pune location. Please share your updated resume with Reshma.nadaf@tatatechnologies.com if your profile matches with the below JD. Qualification -Diploma\BE /B.Tech /ME/M.Tech Relevant Experience 3 to 6 Years Job Description  The selected consultant will be required to support for  To coordinate development cycle like prototype, Supplier and testing agencies. To participate in vehicle, build & issue resolution. Preferred Skills & Knowledge  Catia 3D & 2D, Sheet Metal & Assembly, CAE Hand on Experience Electrical and Electronics aggregate Packing. Experience in design of 2D drafting, 3d modelling & Vehicle level DMU. Good Understanding of packing standard like Ergonomics, CAE, Material feasibility study, GD & T, Gap and flushness, stack up analysis, DVA etc. Good Understanding of Vehicle dynamics Understanding of Design & Development process. Knowledge of quality process such as DF MEA, DFA, DFM, DFS 8D etc. Automotive Electrical & Electronics Domain with IC engine, EV & Fuel cell vehicles Vehicle dynamics EE aggregate Packaging Design process E&E system Integration knowledge #Catia3D2D #SheetMetalandAssembly #CAE #ElectronicsaggregatePacking. #design2Ddrafting #3dmodelling #VehiclelevelDMU.

Urgent Requirement:- Job Title / Grade Assistant Manager / Dy. Manager Department - PE & Projects Domain - Sheet metal Unit & Location - KML Seat-1 Gurgaon    Essential Duties and Responsibilities:- 1. Passenger Car Seat development expertise. 2. Knowledge of sheet metal parts, handling customer, vendor support, and feedback. 3. Basic knowledge of Auto Cad and process knowledge of opening data sheets. 4. Costing of sheet metal components and tooling cost. 5. Conversant with APQP, FMEA & PPAP process, and related documentation. 6. Process knowledge of the development of sheet metal parts. 7. Knowledge of preparing the part feasibility reports and part quality. 8. Process knowledge of welding components and press shop. 9. Basic knowledge of metal parts and seating systems. 10. Knowledge of drawing and understanding of drawing requirements and standards given in drawing. 11. Review and monitor the development of Fixtures, Tools, and Gauges to ensure APQP time plans 12. Troubleshooting of parts during the development phase 13. Monitor Parts development with suppliers/vendors& preparation of plans to meet. 14. Should have a good relationship between the customer and vendor. 15. Responsible for all new activities related to metal parts. 16. Understand customer requirements & implied needs to  improve the product 17. Follow the NPD process and meet the entire development schedule. 18. Participate in Design Reviews& follow up with suppliers for ECN implementation to meet the project timeline 19. Conduct team meetings to follow the APQP process 20. Ensure effective daily work management 21. Co-ordinate with plant for seat Line set up 22. Coordinate with the supplier quality team to ensure timely and flawless development. 23. Planning & execution of Tooling design using CAD/CAM/CAE 24. Feasibility study of RFQ. Supervisory Responsibilities - Manages supervisors/ Executives, R&D, and NPD, who supervise R&D members. Qualification - B.Tech/Diploma – Mechanical, Tool & Die Experience - 5– 11 years of experience Language Skills - Ability to read, analyze and interpret general business documents and technical procedures. Ability to generate information and respond to questions from customers, managers, and employees. IT Skills - Computer literacy well versed with SAP, MS Office, CAD, Internet, and e-mail. Specific Skills 1. Positive attitude with a goal-oriented approach. 2. Interpersonal skills & teamwork. 3. Communication skills. You can share your resume at nishantsingh@krishnamaruti.in

Greetings from Tata Technologies!!! We #tatatechnologies are looking for Design Engineer/ Sr. Design Engineer/ Technical Lead for Exterior Trims - for Pune location. Please share your updated resume to meenakshi.vaidya@tatatechnologies.com if your profile matches with the below JD. Experience - 2 to 10 years Primary Skill - Exterior Trims & Catia Education - BE/BTech in Mechanical Engineering Automotive Domain Please find the JD as below – -Reporting to Delivery Manager/Team Lead and creating Engineering Concept design, master sections, macro feasibility during styling stage. -CAD modeling and 3D annotations of trims components and assemblies, Generate and update BOM for Trim parts; Ensure timely delivery of data at every milestone as per Project time plan and the schedule assigned by Project lead. -Design Detailing, drawing generation, Preparing DFMEA and TPL creation and Release in PLM -Generate DFMEA of exterior trims components and assemblies on component level meeting all requirements of functionality, performance and quality as per TML standards. -Understand and implement feedback from all internal agencies within TML and external agencies (component suppliers, engineering service provider) for design, engineering, development and launch of vehicle. -POST launch engineering support to resolve all manufacturing, Weight, Quality and Cost reduction activities. -Participate in the TML initiatives like VAVE, weight reduction and quality improvements and deliver as per given target of cost, quality and weight. Domain Skills/Technical Competency: -The job requires domain knowledge of Trims Design for Automotive exterior components and assemblies. -Plastic components Design and engineering both trims and Aesthetic beadings and seals and finishers -Knowledge of tooling of plastics and manufacturing processes and Moulding processes. -CATIA expertise, in solid, surface modeling, assembly modeling, 3D annotations. -Good working Knowledge of regulations and engineering processes like DFMEA, DVP, DFM, DFA and DFS, DVP, etc. -PLM knowledge and knowledge of Vehicle BOM and Engineering BOM

Greetings! Urgent Job opening at Dixon technologies Profile: Assembly Quality (IQC, PQC & OQC) Designation: Engineer, Senior Engineer Location: Sector 85, Noida candidates working in similar area please forward your resumes on- Kamal.Chaturvedi@Dixoninfo.com Note: Only candidates with relevant experience in Manufacturing Quality should apply.

rWe are Hiring *QC ENGINEER* for Archon Powerinfra India Pvt.Ltd . Exp.: 5+Years location: Ahmedabad, Gujarat Immediate Joiners or Within 7 Days Interested Candidates Share CV on hrd@archonpowerinfra.com

Atlas Copco (India) Limited Compressor Technique Product Company is currently hiring Diploma and Graduate Apprentice Trainee. Number of Vacancies : Multiple Education : Diploma/BE/B.Tech (Mechanical) 2021/22 Pass out in 1st Class Job location: Dapodi, Pune Desired Experience : 0 to 1 Years Interested candidates please share your resume on snehal.hate@atlascopco.com References would be appreciated :)

HCLTech will conduct walk-in drive on 13th may 2023 for below positions 1. CAE Durability analyst - 3 to 8 Yrs Hypermesh/Ansa & Abaqus 2. CAE Safety Analyst - 3 to 10 Yrs Hypermesh/Ansa & Ls dyna 3. CAE NVH Analyst - 3 to 10 Yrs Hypermesh/Ansa & Nastran 4. CFD Analyst- 3 to 8 Yrs Ansa @ Start CCM+ 5. CAE Senior Safety Modeler/Integration- 3 to 7 Yrs Hypermesh/Ansa , primer, la dyna 6. CAE NVH Senior Modeler/Integration - 2+ Yrs Hypermesh/Ansa, Nastran 7. CFD Senior Modeler- 3 to 7 yrs Ansa Interested candidates can share your profiles to venkateshp@hcl.com

We are looking for Mechanical Design Engineers with experience in Designing, BOM, Change Engineering. Location: Coimbatore Years of Exp: 3-6years Interested can forward your resume to careers@lmw.co.in

Urgent opening in a leading #Auto Company #EV #2W EV Position : - Lead designer - Studio design Location- Bangalore Qualification: Degree/Diploma in Transportation Design/ Product Design Experience: 9+ years of experience with automotive studio’s with at least two 2W production programs. KRA -Automotive Design, Knowledge of basic Graphic design principles and able to understand and visualise 3D. Knowledge of Alias, Catia, Blender, Maya and other 3D modelling tools will be a plus. Willing candidates can send their resumes to below mail ID- poornima.kasana@stmpl.co.in

Greetings from Satyam Venture Engineering Services We are currently hiring for below role, Please share your updated profile to Venkata_Sunkeswara@satven.com Design Engineer/Specialist-Creo, Surfacing Experience – 3 yrs to 10 yrs Qualification – BE /ME –Mechanical/Automotive Location – Hyderabad Total Positions: 4 Requirement: 1. Strong in Creo / Surfacing /Plastics 2. Exposure to Seating components. 3. Working with Windchill 4. Good knowledge in Drafts/ Parting line creations 5. Tooling requirements for Plastic components

Hey, We have openings in France!! Satven is hiring... We welcome you.. Location is France Experience 6 to 10 years Engineer DFMEA – PLATO – CAD - Specialist,Sr.Designer Job Description:   6 to 10 years of Knowledge and FMEA facilitation techniques related to automotive Interior Components. Should have working experience in PLATO DFMEA software. Good Knowledge in Manufacturing & Assembly feasibility study. Should have work experience with Tire-1 suppliers and OEMs. Should be familiar with problem solving techniques. Good knowledge on Manufacturing process. Should implement processes to closure of failures.   Personal Attributes Good presentation and communication skills Please share your profiles to Kavitha_Baru@satven.com

We are hiring! Sr. Design Engineer (Interior/Exterior plastics) Hiring Mode: Permanent Relevant Experience: 5+ years. software: UGNX. Joining period: 30 Days (Immediate joiners are preferred) Location: reference - Pune. No of opening: 2. Working mode: WFO. Skills: Must have skills: 1.Minimum 5-year experience in automotive plastic domain (Interior/ Exterior). 2.Expert in CAD software like UGNX. 3. Hands on experience of Surfacing, Part Modeling, Sectioning, DMU checking. 4. Knowledge of automotive domains like IP/DP/CC/ Exterior trims/ Lighting/ Headliner/ Pillar trims. 5. Good understanding of injection molded parts design & manufacturing process knowledge. 6. Adaptive skills of OEM standards and CAD methodology (VW Methodology, PORSCHE Methodology). 7. Should have knowledge of annotation and drawings. 8. To ensure flexibility and multi-tasking to work in different work groups and projects. 9. Basic knowledge of GDT&T, stack-up analysis, RSS, SC/CC 10. Communicate with clients including involvement in design and implementation of new projects. 11. Must be aware of automotive interior safety regulations. 12. Basic understanding of CAE reports. 13. Strong interpersonal skills and communication with cross functional team. 14. Team player with strong communication skills in English 15. Problem-solving capabilities 16. Excellent verbal and written communication skills. 17. Team handling in the absence of lead. 18. Guiding CAD engineers and GETs. Kindly share profiles on "hr.im@i-mtechnologies.com" with Current CTC, Expected CTC and Notice period.

We are hiring! Sr. Design Engineer (Exterior plastics) Hiring Mode: Permanent Relevant Experience: 8+ years. software: CATIA. Joining period: 30 Days (Immediate joiners are preferred) Location: reference - Pune. No of opening: 1. Working mode: WFO. Skills: Must have skills: 1.Minimum 8 year experience in automotive plastic domain (Interior/ Exterior). 2.Having good hands on experience & standards on CAD tools like Catia V5. 3. Hands on experience of Surfacing, Part Modeling, Sectioning, DMU checking. 4. Must be aware of plastic manufacturing processes and secondary processes. 5. Must be aware of Automotive interior safety regulations. 6. Coordinate with CAE for analysis, Understand CAE results and take actions. Discuss CAE results with customer. 7. Basic understanding of customer specifications. 8. Knowledge of automotive domains like IP/DP/CC/ Exterior trims/ Lighting/ Headliner/ Pillar trims. 9. Good understanding of injection molded parts design & manufacturing process knowledge. 10. Adaptive skills of OEM standards and CAD methodology (VW Methodology, PORSCHE Methodology). 11. Should have knowledge of annotation and drawings. 12. Conduct design reviews. Approve or modify product designs & new product concepts. 13. To ensure flexibility and multi-tasking to work in different work groups and projects. 14. Good knowledge of GDT&T, stack-up analysis, RSS, SC/CC. 15. Should be able to handle team of 6-8 Design engineers/Sr. Design engineers. 16. Communicate with clients including involvement in design and implementation of new projects. 17. Must be aware of Automotive interior safety regulations. 18. Basic understanding of CAE reports. 19. Strong interpersonal skills and communication with cross functional team. 20. Resource management and Problem-solving capabilities 21. Able to synthesize feedback and relay it appropriately 22. Team player with strong communication skills in English 23. Well versed in English / communication (verbal and written) to have discussion with International & Domestic Customers. 24. Team handling in the absence of manager. Kindly share profiles on "hr.im@i-mtechnologies.com" with Current CTC, Expected CTC and Notice period.

Fresher or 1 Yrs Experience Profile Site Engineer Qualification Btech Mechanical, Chemical Salary: Fresher Stipend & Exp. Negotiable share CV at abhishek.sharma@sprayengineering.com